Narrow micromachined bilayer cantilevers, which are broadly used to determine different thin film material properties, have rarely been used to characterize the Poisson's ratio. It is difficult to be determined from the tip deflection, and thus the Poisson's ratio, of the narrow bilayer cantilever. In this paper, the tip deflections of ultra-wide micromachined bilayer cantilevers carry the needed information for finding the Poisson's ratio of thin-film materials. The measurement process and its corresponding model, based on the plate theory, is introduced and tested. The Poisson's ratio of the thin film is determined by comparing the tip deflections of the bilayer cantilever before and after the deposition of the upper layer. Because the fabrication processes are widely used in surface micromachining, the method can be easily implemented.

This paper investigates the compressive strength and workability of High-Performance Concrete (HPC) which yields a slump at 250 ± 20mm and a slump flow at 650 ± 50mm. From the complete stress-strain curve, it shows the peak strain will be higher while the strength increases. Two kinds of the post failure models can be distinguished. The first type (Type I) is called strain softening and the second type (Type II) is called strain snapping back. Also, it is found that the modulus of elasticity Ec decreases as the volume of cementitious paste Vp increases. On the other hand, Poisson's ratio ν increases as Vp increases.

The composition dependence of emission energy of pseudomorphically strained InGaN layers with In content up to 0.2 is obtained. It is found that the main reason of “scatter” in published values of the InGaN bowing parameter is the uncertainty of the Poisson's ratio determination. It is shown that after recalculation to the same Poisson's ratio, most published data yield essentially the same results as compared to experimental uncertainty.