Low phosphorus use efficiency (PUE) is one of the abiotic factors that hamper yield and production potential in chickpea (Cicer arietinum L.). Higher yield coupled with improved PUE can make this crop more adaptive and competitive to wide cropland area, especially on marginal soils having low-level phosphorus (P). To identify chickpea germplasm lines that assimilate phosphorus more efficiently under P-deficient soils, 288 diverse genotypes of chickpea belonging to reference set were evaluated for yield component traits and PUE under field conditions for two consecutive years at two phosphorus levels (low P – no phosphorus application and high P – phosphorus application at 40 kg/ha). Based on 2-year evaluation of data under high and low P soil conditions, we identified strong correlations for traits like number of primary and secondary branches, number of pods, biological yield and seed yield indicating that these traits can be used as proxy traits for PUE. ICC 6571 was the best performing genotype under low P conditions while ICC 6579 yielded maximum under high P regime. We report 16 genotypes namely ICC 1052, ICC 1083, ICC 1098, ICC 1161, ICC 2072, ICC 4418, ICC 4567, ICC 4991, ICC 5504, ICC 5639, ICC 7413, ICC 8350, ICC 9590, ICC 9702, ICC 11584 and ICC 13357 as phosphorus use efficient genotypes based on their better performance for yield and yield-contributing traits under low P compared to high P conditions. These genotypes can be exploited in future as potential donors for development of phosphorus use efficient chickpea cultivars.

To select a stable and best-performing cluster bean line over seasons, an experiment was carried out using five shortlisted advanced breeding lines of vegetable cluster bean in randomized block design with four replications in Kharif and Summer seasons of 2019–20 and 2020–21 at ICAR-Indian Institute of Horticultural Research, Bengaluru. Additive mean effect and multiplicative interaction analysis of variation indicated a significant genotype and environment (G × E) interaction for all the traits. A high environment effect of 33.73% of the total sum of squares was observed for the trait pods per cluster followed by yield per hectare, single pod weight, pods per plant and clusters per plant. The first two interactive principal component axes (IPCA) cumulatively contributed 87.9, 97.3, 94.6, 98.6 and 85.6% variations for yield per hectare, number of clusters per plant, pods per plant, pods per cluster and single pod weight, respectively, leaving a small but significant amount of variation in the third IPCA. A mean versus weighted average of absolute score (WAAS) biplot indicated that genotype IIHRCB 26-2-1 is stable and best for the trait clusters per plant (>20 clusters/plant) while, IIHRCB 22-1-1 is superior and stable (WAAS mean nearly 0.00) for pods per cluster with >5 pods/cluster, pods per plant with >90 pods/plant, single pod weight with >3.0 g and yield per hectare around 24 t/ha. For all the environments, genotype IIHRCB 22-1-1 was found ‘all-time winner’ for yield per hectare and single pod weight. Based on multitrait stability index, IIHRCB 22-1-1 was found the best performer and the most stable genotype.

Introduction and rapid adoption of dicamba-resistant (DR) soybean led to an increase of postemergent applications of dicamba. This resulted in a widespread increase in nontarget dicamba injury to non-DR soybean in 2017. Field studies were conducted in Manhattan, KS, in 2018 and 2019 and in Ottawa, KS, in 2019 to investigate the injury and yield response of soybean varieties with varying herbicide-resistance traits and maturity groups when exposed to dicamba. Four varieties were tested: ‘Credenz 3841LL’ (glufosinate resistant), ‘Credenz 4748LL’ (glufosinate resistant), ‘Asgrow AG4135RR2Y’ (glyphosate resistant), and ‘Stine 40BA02’ (glyphosate and isoxaflutole resistant), abbreviated as CR3841, CR4748, AG4135, and ST40B, respectively. Soybeans were treated with 5.6 g ae ha−1 of dicamba at V3 and R1 stages. Percent soybean injury, soybean height, soybean yield and yield components, and injury to offspring were evaluated. Four weeks after treatment (WAT) at V3, the greatest injury was observed in AG4135 and ST40B. Dicamba application at R1 resulted in the greatest injury to ST40B both 4 WAT and at senescence. Minimal injury was observed in all varieties treated at V3 at senescence and yield loss was 5% or less. Dicamba application at R1 resulted in 19 to 34% yield loss, with the least yield loss in CR4748, and the greatest in ST40B. Varieties with greater injury at senescence generally yielded less than other varieties.

To identify appropriate genotypes for breeding varieties suitable for semi-arid areas, yield components, as well as morphophonological traits of 127 safflower genotypes, were assessed at the Seed and Plant Improvement Institute, Iran. Cluster analysis revealed four distinct groups. The largest group (third cluster) includes 48 genotypes with characteristics such as mostly yellow-coloured flowers, mostly thorny with few thistle genotypes, relatively early-flowering, relatively high number of heads and grains per plant, highest 1000-grain weight with the highest grain yields. In contrast, the smallest group (second cluster) contains 13 genotypes with characteristics such as yellow florets, semi-dwarf, thorny, moderately late-flowering, low number of heads per plant and number of grains per head, low 1000-grain weight, and low grain yield. Principal component analysis results showed that the three components accounted for 29.5, 15.9 and 11.1% of the total variation, respectively. Graphic representation of the biplots based on the first and second principal components showed that the experimental genotypes were classified into four groups. The results also indicated that stem diameter, the number of branches, heads per plant and grains per head had the highest correlation with the first component, and grain yield, flower colour, flowering initiation and plant height had the highest correlation with the second component. These traits can be considered as an appropriate index for the selection of elite safflower genotypes for breeding varieties suited to cultivation in semi-arid conditions.

The aims of the current study were to investigate the effect of drought stress on phenological and morphological traits of sunflower genotypes and to determine the important traits for identifying drought-tolerant and drought-sensitive cultivars. For this purpose, a lattice square-design experiment was conducted with 64 sunflower genotypes in an 8 × 8 pattern with two replications under non-stress and moisture-stress conditions (irrigation holding at the flowering stage) during 2 years 2016 and 2017. Measured and recorded traits were included the some phenological and morphological traits seeds. Sil-96 genotype showed the highest yield under both non-stress and moisture-stress conditions. Among the morphological traits, the head and stem diameters were highly significant to determine the final yield. In comparing the genotypes, it was concluded that the number of seeds per head was the most influential component affecting the yield. Furthermore, 1000-seed weight was the most important factor affecting grain yield under moisture-stress conditions. The result of association analysis study shows that 45 of inter-simple sequence repeat markers in a general linear model are associated with yield and yield component traits and 23 of them were verified in a mixed linear model (MLM) association approach. Also, 32 markers were informative for morpho-physiological traits and 24 of them verified using the MLM. Finally, 19 informative markers were identified for phenological traits and 10 of them were verified by the MLM.

Heat stress, a regular risk to wheat in the subtropics, is a growing threat in other wheat producing regions as the global temperature rises. This paper reports on three experiments evaluating 49 entries of the 13th High Temperature Wheat Yield Trial (13HTWYT) from the International Centre for Maize and Wheat Improvement (distributed in 2014), with Fang 60 as the local check, at two locations at Chiang Mai, Thailand, a designated representative of the wheat mega-environment 5, in which temperature for the coolest month averages >17.5 °C and the crop is subjected to high temperature for the entire growing season. The wheat was grown in the lowland (elevation 330 m) at Chiang Mai University in (i) sand culture to simulate the condition of non-limiting nutrient and water supply and (ii) in the field and (iii) as an on-farm trial in the highlands (elevation 800 m) at Mae Wang district of Chiang Mai province. Heat tolerance in the wheat germplasm, recently developed for adaptation to high temperature, was indicated by longer pre-heading duration, and the positive correlation between days to heading and grain yield all three experiments. The longer time before heading enabled development of larger spikes that produced more seeds from more and larger spikelets and more competent florets. However, with the number of spikes that was either lower than or similar to Fang 60, none of the recently developed 13HTWYT entries out-yielded the local check from the 1970s.

Field studies were conducted to determine if varying the time N fertilizer was applied would affect downy brome interference in winter wheat. Five treatments were compared: four broadcast application times of NH4NO3 at 56 kg N ha-1 during the fallow-crop cycle: 1) during fallow; 2) at planting; 3) during crop dormancy; 4) before winter wheat jointing; and 5) a control where no N was applied. Downy brome was least responsive to N applied during fallow. All N applications during the growing season of winter wheat increased downy brome biomass and culms m-2. Downy brome interference prevented winter wheat from responding positively to N. For example, when crop season precipitation was only 70% of normal, applying N reduced grain yield of winter wheat infested with downy brome from 12 to 28%. This study indicates that N manipulation offers potential for reducing downy brome interference in winter wheat.

Field experiments were conducted to determine the interaction of grazing and herbicide treatments on cheat control and biomass, wheat biomass, wheat grain yield, and wheat yield components. Ethyl-metribuzin at 1120 g ai ha−1 and metribuzin at 420 g ai ha−1 reduced cheat biomass 91 to 99 and 97 to 98%, respectively. Grazing had no effect on herbicide efficacy. Grazing increased cheat biomass in the check by 24% at only one location but did not affect total wheat plus cheat biomass. With one exception, controlled cheat was replaced by wheat on a 1:1 biomass basis when herbicides caused no crop injury. All herbicide treatments increased grain yield, but grazing did not alter yield. At two locations, increased heads m−2 and spikelets/head accounted for most of the grain yield increases, but at one location seeds/spikelet and weight/seed were also increased. Harvest index was unaffected.

Shattercane interference in irrigated soybean was evaluated during 1987, 1988, and 1989 at Clay Center, NE, using ‘Rox’ forage sorghum to simulate shattercane. Soybean yield reduction did not occur if shattercane was removed by 2 wk after emergence in 1987 and 6 wk after emergence in 1988 and 1989. Shattercane interference with soybean began when shattercane height exceeded soybean height. Soybean yield was reduced up to 25% before the height differential reached 30 cm, the minimum difference required for selectively applying glyphosate with a wiper applicator. Soybean nodes per stem, pods per stem, and beans per pod decreased as duration of interference increased. A direct relationship between soybean yield loss and shattercane density fit a rectangular hyperbolic function. Yield loss per shattercane plant was highest at low shattercane densities. Soybean plant height, biomass, nodes per stem, pods per stem, pods per node, and beans per pod decreased as shattercane density increased. An interference model for estimation of soybean yield and economic loss based on shattercane density was developed.

Field studies were conducted over 3 yr to investigate the effect of chemicals on field beans density and weed control. Predominant weed species were common lambsquarters, fumitory, henbit, corn poppy, prostrate knotweed, and wild mustard. All herbicide treatments except linuron injured field beans. Mean field beans survival at harvest was 78% in alachlor and 84% in alachlor containing treatments. Only 5% survived atrazine at 1.9 kg ai ha−1. Ethalfluralin, pendimethalin, simazine, terbutylazine plus terbutryn, and trifluralin treatments produced plant survival values of 56, 82, 86, 74, and 71%, respectively. Chemical control of the main weed species overshadowed the detrimental effect on field beans density, and thus most herbicide treatments except alachlor resulted in increased dry beans yield. The best overall results occurred with linuron, simazine, terbuthylazine plus terbutryn, and pendimethalin which increased dry beans yields 76, 63, 56, and 40%, respectively, over the control plots. Common lambsquarters was the dominant weed, and prostrate knotweed and corn poppy were the most difficult and the easiest species to control, respectively.

The effect of Russian thistle density and duration of interference on spring wheat was investigated in two 3-yr field studies. In the density study, the best fit regression equation predicted a loss in spring wheat yield of 0.5, 0.5, and 0.6% in 1983, 1984, and 1985, respectively, for each percent of the total biomass contributed by Russian thistle. In 1985, when rainfall was 46% below normal, the highest weed density produced greater than 70% of the total plant biomass and reduced yields more than 50%. In contrast, in 1984 when rainfall was 65% above normal, the highest weed density produced less than 20% of the total plant biomass and reduced yields 11%. In the duration study, the predicted yield loss was 2.3 and 0.7% for 1983 and 1984, respectively, for each week of interference. In 1985, yield was not significantly reduced until after 6 weeks of interference. In both studies, spikes/m of row had the highest correlation with yield and were affected the most by weed interference.

Path analysis was used to assess the efficacy of the fiddleneck flower gall nematode as a weed biocontrol agent of coast fiddleneck in competition with wheat during 2 yr of field experiments. The path analysis revealed that the number of inflorescences/plant for fiddleneck and the number of heads/plant for wheat were the most important yield components that determine fecundity and seed yield. The density of fiddleneck had a much greater impact on the yield components of fiddleneck than did the density of wheat or the nematode rate of inoculation. The nematode had its greatest negative impact on the number of seeds/flower of fiddleneck and its greatest positive impact on the number of heads/plant of wheat. Path analysis predicts that a biocontrol agent that has a large negative direct effect on the number of inflorescences/plant for fiddleneck would be more efficacious in decreasing fecundity and seed yield than an agent that only impacts the number of flowers/inflorescence, seeds/flower, or biomass/seed.

Data from three field experiments were used to determine the effects of grazing cheat-infested winter wheat during tillering on cheat and wheat growth, mature biomass, and wheat grain yield components. When terminated, grazing had reduced wheat leaf area 52% and cheat leaf area by 28%. Pooled over experiments, grazing decreased mature wheat height 7 cm and wheat yield 17%. Grazing increased dockage due primarily to cheat 9%. Grazing effects on wheat yield components, biomass, and cheat panicle density varied. Grazing did not affect cheat tillering or wheat harvest index.

The response of ‘Florico,’ ‘Victoria,’ and 'Stan II’ triticale to 2,4-D, dicamba, 2,4-D plus dicamba, diclofop, and thifensulfuron plus tribenuron applied POST during the tillering stage was examined. At rates twice those recommended for application to wheat, Victoria and Stan II were not injured, and injury to Florico was less than 10%. None of the herbicides or combinations adversely affected plant height at maturity, tiller or spike production, grain weight/spike, kernel weight, kernels/spike, yield, or test weight of any cultivar. Cultivars varied in tiller production, height, yield, test weight, kernel weight, and kernels/spike.

During 1985 to 1989, a series of field experiments were conducted at the Rice Research Station in Crowley, LA. Path analysis was employed to evaluate the competitive interaction between a weed (red rice) and cultivated rice (Mars). The path analysis quantified direct effects of red rice and Mars rice densities on the yield components (grain weight, percent filled florets, number of florets panicle−1, and panicles plant−1) of red rice and Mars rice. The model illustrated the direct and indirect effects of the yield components on fecundity and grain yield plant−1. The direct effects of Mars and red rice densities on panicles plant−1 and florets panicle−1 were always negative. In contrast, the effects of density on percent filled florets and grain weight varied from positive to negative and were relatively small, implying that they were determined primarily by density-independent factors. Path analysis indicated that the number of panicles plant−1 and florets panicle−1 were the most important yield components determining the responses of fecundity and grain yield to competition.

The effects of hogpotato interference on cotton and of the crop on the weed were measured under field conditions in four environments. Full-season interference from 105 ± 21 hogpotato plants/m2 reduced cotton plant height by 14 to 44%. Conversely, weed dry weight was reduced 54% through full-season interference from cotton. Lint yield reductions in cotton ranged from 31 to 98% following full-season weed interference. Interference during the first 7 weeks of crop growth reduced lint yield by approximately 40%; however, interference after 7 weeks of weed-free maintenance did not affect lint yield. Interference reduced boll size in 3 of 4 yr, lint percent in 2 of 4, and boll number in the only year it was measured. Cotton fiber length, uniformity index, and micronaire were reduced by full-season interference in 1 of 2 yr; however, fiber strength was not affected in either year. Significant use of soil water by hogpotato occurred at 120 cm and deeper in the soil while cotton used water primarily in the upper 75 cm.

Interference from broadleaf signalgrass at a density of 180 plants/m2 reduced rough rice yields of ‘Bond’ a maximum of 48% at 95 days after rice emergence and reduced yields of ‘Mars' a maximum of 21% from season-long interference. Interference durations of 40 days or longer reduced the panicles/m2, culms/m2, and plant height of rice. Straw dry weight of Bond and Mars was reduced 41 and 26%, respectively, from season-long interference. Increased durations of weed interference did not affect the number of spikelets/panicle, percent filled spikelets, rough kernel weight, or head rice yield of either cultivar. Broadleaf signalgrass produced less dry weight and fewer panicles/m2 when grown with Mars than with Bond.

The availability of postemergence grass control herbicides can prevent dependence on potentially unnecessary preemergence herbicides. No postemergence grass control herbicides have federal registration for kenaf in the United States. This research was conducted to collect data to support such registration. Clethodim, fluazifop, quizalofop, and sethoxydim applied at three rates did not injure established kenaf, reduce plant populations, reduce plant heights, or reduce stalk yields.

Field experiments were conducted during 3 yr in Thessaloniki, northern Greece, to determine the efficacy of various herbicides applied alone or in mixtures POST on hoary cress grown in winter wheat. Also, the efficacy of these herbicides on hoary cress generated from seed or root fragments was investigated in pot experiments. All herbicides except for ioxynil plus bromoxynil provided 90 to 100% control of hoary cress generated from seed and root fragments grown in pots. Ioxynil plus bromoxynil gave 84% control of hoary cress generated from seed, but only 66% control of plants generated from root fragments. In the field, mecoprop plus dicamba, imazamethabenz plus mecoprop plus dicamba, and triclopyr applied at the four- to eight-leaf stage provided, respectively, 87, 76, and 83% control of hoary cress (averaged over year and assessment time). Thifensulfuron plus tribenuron provided only 29% control. Chlorsulfuron plus dicamba, clopyralid plus MCPA, 2,4-D plus metosulam, and fluroxypyr provided intermediate hoary cress control. Furthermore, the least hoary cress emergence 52 wk after treatment appeared in plots treated with triclopyr. In addition, wheat grown in plots treated with mecoprop plus dicamba yielded more than wheat treated with the other herbicide treatments, and 55% more than wheat grown in nontreated plots. The results of this study indicate that very good control of hoary cress and high wheat yield can be obtained by the application of mecoprop plus dicamba at the four- to eight-leaf weed growth stage.

Integrated weed management practices, such as crop rotation and increased seeding rates, potentially improve weed management. Yet, few studies compare competitive interactions of weeds with different crops. This research quantified the impact of Persian darnel on spring wheat, canola, and sunflower yield across different seeding rates. Increasing crop density increased yield when Persian darnel affected crop yield early in physiological development. Crop yield loss was estimated to reach 83, 70, and 57% for spring wheat, canola, and sunflower, respectively, at high Persian darnel densities. Persian darnel reduced spring wheat yield by limiting the number of tillers per plant and seed per tiller; reduced canola yield by limiting the number of branches per plant, pods per branch, and seed per pod; and reduced sunflower yield by limiting the number of seed per plant. Persian darnel affected crop growth early in physiological development, indicating that interspecific interference occurred early in the growing season. Cultural and resource management aimed at reducing Persian darnel impact on resource availability and crop yield components will reduce Persian darnel impact on crop yield.