Atrazine offers growers a reliable option to control a broad spectrum of weeds in grain sorghum production systems when applied PRE or POST. However, because of the extensive use of atrazine in grain sorghum and corn, it has been found in groundwater in the United States. Given this issue, field experiments were conducted in 2017 and 2018 in Fayetteville and Marianna, Arkansas, to explore the tolerance of grain sorghum to applications of assorted photosystem II (PSII)-inhibiting herbicides in combination with S-metolachlor (PRE and POST) or mesotrione (POST only) as atrazine replacements. All experiments were designed as a factorial, randomized complete block; the two factors were (1) PSII herbicide and (2) the herbicide added to create the mixture. The PSII herbicides were prometryn, ametryn, simazine, fluometuron, metribuzin, linuron, diuron, atrazine, and propazine. The second factor consisted of either no additional herbicide, S-metolachlor, or mesotrione; however, mesotrione was excluded in the PRE experiments. Crop injury estimates, height, and yield data were collected or calculated in both studies. In the PRE study, injury was less than 10% for all treatments except those containing simazine, which caused 11% injury 28 d after application (DAA). Averaged over PSII herbicide, S-metolachlor–containing treatments caused 7% injury at 14 and 28 DAA. Grain sorghum in atrazine-containing treatments yielded 97% of the nontreated. Grain sorghum receiving other herbicide treatments had significant yield loss due to crop injury, compared with atrazine-containing treatments. In the POST study, ametryn- and prometryn-containing treatments were more injurious than all other treatments 14 DAA. Grain sorghum yield in all POST treatments was comparable to atrazine, except prometryn plus mesotrione, which was 65% of the nontreated. More herbicides should be evaluated to find a comparable fit to atrazine when applied PRE in grain sorghum. However, when applied POST, diuron, fluometuron, linuron, metribuzin, propazine, and simazine have some potential to replace atrazine in terms of crop tolerance and should be further tested as part of a weed control program across a greater range of environments.

Weed control in corn traditionally has relied on atrazine as a foundational tool to control problematic weeds. However, the recent discovery of atrazine in aquifers and other water sources increases the likelihood of more strict restrictions on its use. Field-based research trials to find atrazine alternatives were conducted in 2017 and 2018 in Fayetteville, AR, by testing the tolerance of corn to PRE and POST applications of different photosystem II (PSII) inhibitors alone or in combination with mesotrione or S-metolachlor. All experiments were designed as a two-factor factorial, randomized complete block, with the two factors being (1) PSII-inhibiting herbicide and (2) the herbicide added to create the mixture. The PSII-inhibiting herbicides were prometryn, ametryn, simazine, fluometuron, metribuzin, linuron, diuron, atrazine, and propazine. The second factor consisted of either no additional herbicide, S-metolachlor, or mesotrione. Treatments were applied immediately after planting in the PRE experiments and to 30-cm–tall corn for the POST experiments. For the PRE study, low levels of injury (<15%) were observed at 14 and 28 d after application and corn height was negatively affected by the PSII-inhibiting herbicide applied. PRE-applied fluometuron- and ametryn-containing treatments consistently caused injury to corn, often exceeding 5%. Because of low injury levels caused by all treatments, crop density and yield did not differ from that of the nontreated plants. For the POST study, crop injury, relative height, and relative yield were affected by PSII-inhibiting herbicide and the herbicide added. Ametryn-, diuron-, linuron-, propazine-, and prometryn-containing treatments caused at least 25% injury to corn in at least 1 site-year. All PSII-inhibiting herbicides, except metribuzin and simazine when applied alone, caused yield loss in corn when compared with atrazine alone. Diuron-, linuron-, metribuzin-, and simazine-containing treatments applied PRE and metribuzin- and simazine-containing treatments applied POST should be investigated further as atrazine replacements.

Field studies were conducted on organic soils in Belle Glade, FL, in 2016 to 2017 to evaluate sugarcane tolerance and fall panicum control with topramezone applied alone or in combination with triazine herbicides (atrazine, metribuzin, ametryn). Treatments included topramezone (25 and 50 g ai ha−1) applied alone or in combination with atrazine (2,240 g ai ha−1), metribuzin (2,240 g ai ha−1), and ametryn (440 g ha−1) on four plant cane varieties to evaluate tolerance, and on second ratoon fields to determine efficacy on fall panicum control. Topramezone applied alone had no effect on sugarcane chlorophyll fluorescence (i.e., the ratio of variable fluorescence to maximum fluorescence), total chlorophyll, and carotenoid 7 to 28 d after treatment (DAT), suggesting sugarcane tolerance. Significant reduction of these parameters occured 7 to 14 DAT when topramezone (50 g ai ha−1) was applied with ametryn or metribuzin; however, reductions were not detected thereafter, indicating recovery. Sugarcane yield was not affected by topramezone applied alone or in combination with the triazine herbicides. Topramezone (50 g ai ha−1) plus metribuzin resulted in acceptable control of fall panicum (84%) with limited to no regrowth of meristematic tissue at sugarcane canopy closure, equivalent to 56 to 70 DAT. These results indicate that when sequential applications of topramezone, applied alone or in combination with these triazine herbicides, are required for efficacious weed control, topramezone applications alone can be made after 7 d, whereas the combinations can be made after 14 or 21 d, depending on sugarcane sensitivity.

A 2,4-D-resistant tall waterhemp population (FS) from Nebraska was evaluated for resistance to other TIR1 auxin receptor herbicides and to herbicides having alternative mechanisms of action using greenhouse bioassays and genetic markers. Atrazine, imazethapyr, lactofen, mesotrione, glufosinate, and glyphosate were applied in a single-dose bioassay, and tissue was collected from marked plants for genetic analysis. The FS population was not injured by atrazine or by imazethapyr. Approximately 50% of the plants survived lactofen and were actively growing 28 d after treatment. The population was susceptible to mesotrione, glufosinate, and glyphosate. Ametryn, chlorimuron-ethyl, 2,4-D, aminocyclopyraclor, aminopyralid, and picloram were applied in dose–response studies. The FS population was sensitive to ametryn, and the Ser-264-Gly substitution in the D1 protein was not detected, suggesting the lack of response to atrazine is not due to a target-site mutation. The FS population exhibited less than 50% injury to chlorimuron-ethyl at application rates 20 times the labeled use rate. The Ser-653-Asn acetolactate synthase (ALS) substitution, which confers resistance to imidazolinone herbicides, was present in the FS population. However, this does not explain the lack of response to the sulfonylurea herbicide, chlorimuron-ethyl. Sequencing of a portion of the PPX2L gene did not show the ΔG210 mutation that confers resistance to protoporphyrinogen oxidase–inhibiting herbicides, suggesting that other factors were responsible for waterhemp survival after lactofen application. The FS population was confirmed to be at least 30-fold resistant to 2,4-D relative to the susceptible populations. In addition, it was at least 3-fold less sensitive to aminopyralid and picloram, two other TIR1 auxin receptor herbicides, than the 2,4-D-susceptible populations were. These data indicated that the FS population contains both target and non–target site mechanisms conferring resistance to herbicides spanning at least three mechanisms of action: TIR1 auxin receptors, ALS inhibitors, and photosystem II inhibitors.

Proso millet (Panicum miliaceum L. # PANMI) was controlled in corn (Zea mays L. ‘Pioneer 3747’) with postemergence-directed herbicides applied following a standard preplant-incorporated application of butylate [S-ethylbis(2-methylpropyl)carbamothioate] plus dichlormid (2,2-dichloro-N,N-di-2-propenylacetamide) plus cyanazine {2-[[4-chloro-6-(ethylamino)-1,3,5-triazin-2-yl]amino]-2-methylpropanenitrile}. Postemergence-directed applications of ametryn [N-ethyl-N′-(1-methylethyl)-6-(methylthio)-1,3,5-triazine-2,4-diamine], cloproxydim {(E,E)-2-[1-[[(3-chloro-2-propenyl)oxy]imino]butyl]-5-[2-(ethylthio)propyl]-3-hydroxy-2-cyclohexen-1-one}, butyl ester of fluazifop {(±)-2-[4-[[5-(trifluoromethyl)-2-pyridinyl]oxy]phenoxy] propanoic acid}, butyl ester of fluazifop-p {(R)-2-[4-[[5-(trifluoromethyl)-2-pyridinyl]oxy]phenoxy] propanoic acid}, glyphosate [N-(phosphonomethyl)glycine], methyl ester of haloxyfop {2-[4-[[3-chloro-5-(trifluoromethyl)-2-pyridinyl]oxy]phenoxy]propanoic acid}, and sethoxydim {2-[1-(ethoxyimino)butyl]-5-[2-(ethylthio)propyl]-3-hydroxy-2-cyclohexen-1-one} in 40-cm-tall corn gave greater than 90% control of 5- to 15-cm-tall proso millet while causing little or no corn injury at selected rates. Season-long proso millet control was obtained with sethoxydim at rates as low as 56 g ai/ha with no visible corn injury. Unacceptable injury to 40-cm-tall corn occurred with all but the lowest rate of sethoxydim (56 g ai/ha) when a crop oil concentrate was used. Sethoxydim applied as a directed spray at rates up to 110 g ai/ha plus 1.25% (v/v) crop oil concentrate did not injure 60-cm-tall corn.

Several precision postemergence-directed sprayers with different nozzle designs and arrangements were evaluated for potential use in sweet corn for wild-proso millet (PANMI) control in field trials from 1987 to 1989. Ametryn at 2270 g ha-1 plus oil-emulsifier mixture (OEM) at 1.3% v/v and sethoxydim alone or plus OEM applied postemergence-directed selectively controlled PANMI in sweet corn. Sethoxydim at 220 g ha-1 plus OEM controlled PANMI best when averaged over the 3-yr period. Ametryn plus OEM did not injure corn and sethoxydim at 110 g ha-1 plus OEM caused little or no corn injury and no yield reductions when applied with any of the sprayers. Generally, only sethoxydim at 220 g ha-1 plus OEM injured corn. The amount of injury was different among sprayers, with the nozzle designs and arrangements responsible for corn injury. Injury was minimized when sethoxydim was applied with a sprayer equipped with 150 degree dual orifice nozzles spaced 38 cm apart and mounted on skids that contacted the soil to assure constant nozzle height. This sprayer, or sprayers of similar nozzle design, show the most potential for use by sweet corn growers.

The effect of two dates of initial manual weeding, i.e., before flowering and after flowering, and of no weeding on yield of a local groundnut variety was studied during 1988 and 1989 at Minkoameyos, Yaounde, Cameroon, in comparison with chemical weed control method or control. The use of herbicides ametryn plus promotryn for weed control gave the best mean yield, followed by handweeding after flowering, and handweeding before flowering, in that order. The no weeding treatment had the lowest yield throughout the trial period.

Thirty-six postemergence-directed (PDIR) herbicide treatments, applied with a precision PDIR sprayer, were evaluated for wild-proso millet (PANMI) control in sweet corn field trials in Wisconsin from 1987 to 1990. The performance of butylate and cyanazine (B + C), applied to suppress PANMI early in the season and to provide a height differential between corn and PANMI, greatly influenced PANMI control with PDIR treatments. PDIR treatments controlled PANMI greater than 90% when PANMI was effectively suppressed by B + C, but poor PANMI suppression reduced PDIR herbicide efficacy. Generally, PDIR treatments of paraquat or sethoxydim most effectively controlled PANMI. Paraquat alone at 545 g ha–1 or combined with simazine or sethoxydim at 57 and 114 g ha–1, and sethoxydim at 170 and 227 g ha–1 plus an adjuvant controlled PANMI greater than 95%. PDIR applications of ametryn, linuron, sethoxydim at 57 to 227 g ha–1 alone, sethoxydim at less than 114 g ha–1 plus an adjuvant, and sethoxydim at 114 g ha–1 tank mixed with either of four other herbicides controlled less than 86% of PANMI. Tank mixing a photosynthetic inhibitor or sethoxydim with paraquat did not improve PANMI control compared with paraquat alone. PANMI control with sethoxydim plus an adjuvant at 114 g ha–1 was similar to 227 g ha–1. There was no difference in PANMI control with sethoxydim applied with crop oil concentrate or BCH-815. With the exception of glyphosate at 318 g ha–1 and sethoxydim at 227 g ha–1 plus an adjuvant, PDIR treatments did not injure sweet corn in 1987, 1988, or 1990. However, sethoxydim in 1989 at all rates severely injured corn.

A field study was conducted in 1994 and 1995 to determine the effect of MON 12037, linuron, and ametryn on purple nutsedge density in field corn in a 2-yr rotation with cotton. Each corn treatment included cultivation and noncultivation. A standard treatment for purple nutsedge control was applied to all cotton plots in the second season of the corn–cotton rotation. Purple nutsedge shoot densities were reduced in cultivated MON 12037, noncultivated MON 12037, and cultivated ametryn in the corn–corn and corn–cotton rotations. Purple nutsedge tuber population was reduced in the corn–corn rotation by MON 12037 with and without cultivation, cultivated linuron, and cultivated ametryn treatments relative to the noncultivated check. In the corn–cotton rotation, purple nutsedge tuber population was reduced only by the cultivated MON 12037 and cultivated ametryn treatments relative to the noncultivated check.

Four field studies were conducted in 2004 to evaluate corn tolerance, weed control, grain yield, and net returns in glufosinate-resistant (GUR), glyphosate-resistant (GYR), imidazolinone-tolerant (IT), and nontransgenic (NT) corn with various herbicide systems. No significant differences between hybrid systems were observed for weed control. Limited corn injury (< 5%) was observed for all herbicide treatments. A single early POST (EPOST) system without S-metolachlor and sequential POST over the top (POT) herbicide systems, averaged over corn hybrids and PRE and late POST-directed (LAYBY) herbicide options, provide 93 and 99% control of goosegrass, respectively, and at least 83 and 97% control of Texas panicum, respectively. A single EPOST system without S-metolachlor, averaged over corn hybrids and LAYBY treatment options, provided at least 88% control of large crabgrass. When averaged over corn hybrid and PRE herbicide options, a sequential POT herbicide system alone provided at least 98, 99, 98, and 100 control of large crabgrass, morningglory species, Palmer amaranth, and common lambsquarters, respectively. The addition of ametryn at LAYBY to a single EPOST system without S-metolachlor was beneficial for improving control of morningglory species, common lambsquarters, and Palmer amaranth, depending on location. However, the observed increases (7 percentage points or less) are likely of limited biological significance. Grain yield was variable between hybrids and locations because of environmental differences. Consequently, net returns for each hybrid system within a location were also variable. Any POT system with or without ametryn at LAYBY, averaged over corn hybrid and PRE herbicide options, provided at least 101, 97, 92, and 92% yield protection at Clayton, Kinston, Lewiston, and Rocky Mount, NC, respectively. Net returns were maximized with treatments that provided excellent weed control with minimal inputs.

Energycane has been proposed as a potential, perennial bioenergy crop for lignocellulosic-derived fuel production in the United States. Herbicides currently used in sugarcane and other crops can potentially be used in energycane if there is acceptable tolerance. Also, to limit future invasion of energycane escapes, herbicides used for perennial grass control could potentially be used for management of escapes. In container studies conducted outside, aboveground and belowground biomass of energycane was measured to evaluate energycane tolerance to 9 PRE and 19 POST herbicides used in sugarcane and other crops. PRE application of atrazine, diuron, mesotrione, metribuzin, pendimethalin, and S-metolachlor at rates labeled for sugarcane did not significantly injure (< 3%) or reduce energycane biomass compared with the nontreated plants 28 and 56 d after treatment (DAT). Injury from clomazone (54%), flumioxazin (7%), and hexazinone (29%) was observed 28 DAT. Injury from flumioxazin was transient and was not observed at 56 DAT. At 56 DAT, energycane injury increased to 71 and 98%, respectively, for clomazone and hexazinone. Hexazinone and clomazone applied PRE significantly reduced biomass compared with the nontreated plants. At 28 DAT, POST application of 2,4-D amine, ametryn, asulam, atrazine, carfentrazone, dicamba, halosulfuron, mesotrione, metribuzin, and trifloxysulfuron at labeled rates for sugarcane did not injure or significantly reduce energycane biomass compared with the nontreated plants. Injury was observed when clethodim (99%), clomazone (51%), diuron (51%), flumioxazin (21%), glufosinate (84%), glyphosate (100%), hexazinone (100%), paraquat (66%), and sethoxydim (100%) were applied POST, and each of these treatments reduced energycane biomass compared with the nontreated plants. These results show that several PRE and POST herbicides used for weed management in sugarcane may potentially be used in energycane for weed control. Also, based on our results, clethodim, glyphosate, and sethoxydim would be effective for management of energycane escapes.

Experiments were conducted at three North Carolina research stations in 2003 to evaluate weed control and corn yield in glyphosate-resistant, glufosinate-resistant, imidazolinone-tolerant, and conventional corn weed management systems. Late-season control of common lambsquarters, large crabgrass, and yellow nutsedge increased with metolachlor PRE compared with no PRE herbicide treatment. Common lambsquarters, pitted morningglory, entireleaf morningglory, spurred anoda, and tropic croton control was improved by a single early POST (EPOST) application regardless of herbicide system. Control of common lambsquarters, pitted morningglory, entireleaf morningglory, and spurred anoda was similar for glyphosate and glufosinate systems for each POST over-the-top (POT) herbicide system. A single EPOST application of imazethapyr plus imazapyr to imidazolinone-tolerant corn controlled common lambsquarters, pitted morningglory, entireleaf morningglory, and spurred anoda and was better than a single EPOST application of glyphosate, glufosinate, or nicosulfuron. Tropic croton was controlled ≥ 95% with glufosinate or glyphosate, applied once or twice, or in mixture with metolachlor. A single EPOST application of imazethapyr plus imazapyr or nicosulfuron did not control tropic croton. Common lambsquarters, entireleaf morningglory, large crabgrass, Palmer amaranth, and yellow nutsedge control was greater with a late-POST–directed (LAYBY) of ametryn than no LAYBY. Systems that did not include a POT herbicide system had the lowest percentage in the weed-free yield and the lowest yield. Treatments that included a POT system with or without a PRE treatment of metolachlor yielded within 5% of the weed-free treatment, regardless of herbicide system.