Statistical analyses of chemical data from the literature of corrensite minerals suggest a large compositional variability, more evident in octahedral than in tetrahedral coordination. Mg occupies 40–80% of the octahedral sites, with Al and Fe2+ making up the remainder. Approximately 15–30% of the tetrahedral sites are filled by Al. Despite this compositional variability, distinct fields for the several types of mixed-layer trioctahedral chlorite/trioctahedral swelling layer are not apparent. Statistical analyses of the composition of corrensite compared with saponite, vermiculite, and chlorite suggest that corrensite is an intermediate between trioctahedral chlorite and trioctahedral smectite. If Fe/(Fe + Mg) > 50%, chlorite alone is favored, but with increasing Mg, chlorite appears to transform into corrensite and then, by iron oxidation, into trioctahedral smectite. Despite the chemical variability between corrensite, chlorite, and saponite, corrensite appears chemically to be a well-defined species. On the other hand, corrensite cannot be characterized chemically on the basis of its swelling component. Thus, the current definition of corrensite as a regular 1:1 interstratification of trioctahedral chlorite and either trioctahedral smectite or vermiculite is appropriate.

Regularly interstratified chlorite/smectite (corrensite) occurs as grain coatings in marine and eolian sandstones of the Permian Cutler Formation in Lisbon Valley, Utah. Corrensite dominates the <2-μm clay size fraction along with lesser amounts of regularly interstratified illite/smectite in bleached, permeable sandstones that are interbedded with smectite-dominated arkosic, red, laterally discontinuous fluvial sandstones. Chemical and X-ray powder diffraction analyses of the corrensites show them to be di/dioctahedral with 060 spacings of 1.501 to 1.508 Å and to contain significantly higher Al:Mg ratios than more common trioctahedral types. Calculated structural formulae are: corrensite, M0.6(Fe3+0.2Mg1.6Al4.6)(Al0.2Si7.8)O20(OH)10; illite/smectite, M1.5(Fe3+0.1Mg1.7Al2.8)(Al1.6Si6.4)O20(OH)4; and smectite, M0.9(Fe3+0.3Mg1.2Al2.8)(Al0.6Si7.4)O20(OH)4.

Chemical similarity between the smectite and the corrensite and pervasive distribution of smectite in low-permeability shales and siltstones suggest that the smectite was a precursor of the corrensite. Three stages of mineral precipitation in the Cutler Formation have been recognized. Quartz precipitated early as grain overgrowths, followed by the formation of authigenic clay minerals, and later calcite cementation which destroyed much of the original rock fabric. Calculations show that aluminous corrensite was favored by elevated temperature (∼ 100°C), low pH, and low dissolved silica. Local hydrothermal fluids rising along the Lisbon fault apparently permeated the Cutler red bed section and precipitated the clay minerals. The assemblage corrensite + illite/smectite in the sandstones probably formed by interaction of formation fluids with smectite and an Al-bearing phase, such as K-feldspar or kaolinite.

An unusual vanadium chlorite precipitated during the formation of a vanadium-uranium ore deposit in the Henry Basin, southeastern Utah. The ore deposit formed by reduction and precipitation of U and V in the presence of organic matter at the interface between a stagnant brine and overlying, circulating meteoric water. Some samples of the vanadium chlorite (heated before analysis) contain ≥ 10% V2O5. In fresh samples, most of the vanadium is in the trivalent oxidation state. X-ray powder diffraction data suggest that Fe and V are concentrated preferentially in the interlayer hydroxide sheets of the chlorite. A d(060) value of 1.52 Å indicates that the chlorite probably has a dioctahedral structure which is distended by the presence of octahedral Fe and V. The vanadium ore zone is flanked by peripheral zones containing perfectly ordered chlorite/smectite. This chlorite/smectite contains much less V than the pure chlorite. This chlorite may have formed by the progressive precipitation of vanadium-rich interlayer hydroxide sheets in the mixed-layer chlorite/smectite in the most reducing portion of the ore zone. The pure chlorite is a IIb polytype, which, for nonvanadiferous analogs, is ordinarily found in high-temperature environments; however, no evidence exists to show that these rocks have ever been exposed to elevated temperatures. In fact, the presence of unreacted smectite in a potassium-rich setting and the low vitrinite reflectance of coalified plant debris indicate a low-temperature history for these sediments.

A corrensite from Taro Valley, Italy, was studied by infrared analysis at different temperatures in the natural state and after exchange with seven different cations. The vibrational bands in the OH-stretching region can be divided into three main absorption regions: 3690-3640, 3580-3560, and 3500-3000 cm−1. The influence of the cation hydration water was observed in the third region only, whereas the intensity, frequency, and shape of the residual bands were not related to the nature of the exchangeable cations. The bands of region I were unaffected by heating the sample to 500°C; however, those in regions II and III were destroyed. Deuteration was not observed for any of the three OH-stretching regions. The dichroic behavior of the OH-stretching bands in the three regions were relatively affected by the exchangeable cations. Generally, the bands in region I exhibited a more dichroic behavior than those in regions II and III.

From the IR data corrensite appears to consist of: (1) a trioctahedral silicate layer with an OH-stretching band at about 3685 cm−1, (2) a hydroxide layer with OH-stretching bands at about 3570 and 3420 cm−1, and (3) a distinct interlayer space that is not interstratified with the hydroxide layers.

The chemical compositions of chlorite-smectite mixed-layered minerals (C/S) from the Ohyu caldera (Inoue, 1985) are analyzed using M+-4Si-3R2+ diagrams. The assumed original saponite has the following composition: Si3.54Al0.46O10Al0.173Fe2+1.385Mg1.295Mn0.02(OH)2M+0.56. Random C/S minerals (100 to 80% expandable layers) are interpreted as an interstratification of the starting 2:1 smectite layer with a A1XR2+3−x interlayer. The 2:1 smectite layer charge remains constant but Ca, Na, K cations are replaced by a Al-R2+ complex ion. The brucitic layer (produced by the polymerization of the complex ions) and the 2:1 smectite layer form a 14 Å non-expandable phase having a composition different from a true chlorite.

The true chlorite layers first appear in the ordered (corrensite) phase composed of a high charge saponite: Si3.35A10.65O10R2+3(OH)2M+0.65 and an octahedral vacancy-free chlorite Si2.90A11.10O10Al1.10R2+4.90(OH)8. The recrystallization of the original trioctahedral smectite into a high-charge saponite decreases the b-dimension difference with the chlorite component.

From these data, it is suggested that the trioctahedral smectite-to-chlorite conversion is controlled by three reactions: 1. fixation and polymerization of Al-R2+ complex ions in the interlayer region of the original smectite producing a 14 Å non-expandable phase (the interlayering of this phase with the original smectite gives the randomly interstratified C/S mineral. 2. dissolution of these random mixed-layered minerals and precipitation of corrensite. 3. dissolution of corrensite and growth of Fe-rich chlorite.

A low-charge corrensite, i.e., a regular 1:1 interstratified smectite/chlorite was found in veins and fissures of an extensively fractured dolomite south of Perth, Ontario, Canada. Total chemical analysis indicated that the mineral was trioctahedral, having a structural formula corresponding to:

$({\text{Ca}}_{0.17}){({\text{Mg}}_{7.36}{\text{Al}}_{0.90}{\text{Fe}}^{3+}{\hspace{0.17em}}_{0.45}{\text{Fe}}^{2+}{\hspace{0.17em}}_{0.42})}^{\text{VI}}{({\text{Si}}_{6.06}{\text{Al}}_{1.94})}^{\text{IV}}{\text{O}}_{20}{(\text{OH})}_{10}.$

The coefficient of variation (CV) of the d(00l) spacings calculated for the mineral from X-ray powder diffraction data was 0.42, well below the maximum recommended value for corrensite, 0.75. The corrensite coexists with phlogopite, which is present as small (~0.5 mm) crystals throughout the rock and locally as large (~5 cm) crystals in pegmatitic veins. Microscopic observatiofls of large phlogopite crystals partially altered to corrensite suggest that corrensite formed at the expense of phlogopite by hydrothermal alteration.

High-resolution transmission electron microscopy (HRTEM) has been used to examine illite/smectite from the Mancos Shale; rectorite from Garland County, Arkansas; illite from Silver Hill, Montana; Na-smectite from Crook County, Wyoming; corrensite from Packwood, Washington; and diagenetic chlorite from the Tuscaloosa Formation. Thin specimens were prepared by ion milling, ultramicrotome sectioning, and/or grain dispersal on a holey carbon substrate. Some smectite-bearing clays were also examined after intercalation with dodecylamine hydrochloride (DH). Intercalation of smectite with DH proved to be a reliable method for HRTEM imaging of expanded smectite (d (001) = 16 Å) which could then be distinguished from unexpanded illite (d (001) = 10 Å). Lattice fringes of basal spacings of DH-intercalated rectorite and illite/smectite showed a 26-Å periodicity. These data support X-ray powder diffraction (XRD) studies which suggest that these samples are ordered, interstratified varieties of illite and smectite. The ion-thinned, unexpanded corrensite sample showed discrete crystallites containing 10-Å and 14-Å basal spacings corresponding to collapsed smectite and chlorite, respectively. Regions containing disordered layers of chlorite and smectite were also noted. Crystallites containing regular alternations of smectite and chlorite layers were not common. These HRTEM observations of corrensite did not corroborate XRD data. Particle sizes parallel to the c axis ranged widely for each sample studied, and many particles showed basal dimensions equivalent to more than five layers. For all illite, smectite, and illite/ smectite particles examined, crystallite sizes of about 20 Å in the basal dimension were not observed.

Burial diagenetic reactions of di- and trioctahedral clay minerals were compared in Brazilian offshore, basinal sediment sequences of Cretaceous age. Originally dioctahedral smectite-rich shales of three basins—Potiguar,Ceara, and Ilha de Santana—exhibited the classical smectite-to-illite burial pattern. Trioctahedral clay-rich shales and trioctahedral clay-mineral cements in sandstones, however, showed a burial sequence of saponite to mixed-layer chlorite/saponite with progressive increase in the percentage of chlorite layers with increasing burial depth.

The change from disordered to ordered interstratifications of chlorite/saponite occurred in the temperature range 60°-70°C at a vitrinite reflectance value of about 0.65. These values are lower than those found for the ordering of illite/smectite clays. Increasing substitution of Al for Si in tetrahedral sites, followed by fixation of interlayer hydroxide sheets was found to be the major chemical change promoting transformation of saponite to chlorite via corrensite.

A mineralogical investigation of the highly kaolinized Chanon granite and albite-muscovite granite of the Montebras cupola, Creuse, France, indicates that the magmatic stage was followed by two hydrothermal events related to successive cooling stages and by late weathering. The hydrothermal alteration was accompanied first by greisen formation and then a broad kaolinization process, which pervasively affected the granitic bodies. In the Chanon granite, the greisens are characterized by a trilithionite-lepidolite-quartz-tourmaline assemblage and are surrounded by concentric alteration zones. From the greisen to the fresh granite three zones were distinguished: (1) a zone characterized by secondary brown biotite (<400°C), (2) a zone characterized by secondary green biotite and phengite (300–350°C), and (3) a zone characterized by the presence of corrensite (180°–200°C) located around greisen veinlets. In the albite-muscovite granite the greisen is composed of lepidolite and quartz. This mineral assemblage was followed locally by Li-tosudite crystallization. During the second hydrothermal event (<100°C) an assemblage of kaolinite, mixed-layer illite/smectite (I/S), and illite formed pervasively and in crack fillings; the smectite layers of the US are potassic. Weathering produced Fe oxide and kaolinite. This kind of alteration developed mainly in the overlying Chanon granite. Here, Ca-Mg-montmorillonite formed in subvertical cracks, which transect the two granitic bodies, and hydrothermal I/S was obliterated by Ca-Mg-montmorillonite.

The hydrothermal parageneses were apparently controlled by magmatic albitization and the bulk chemistry of the two granitic bodies. The albitization, the formation of large micaceous greisens, and the successive recrystallizations of biotite (which was the most susceptible phase to alteration) provide information on the temperature range and chemical mobility during successive cooling stages. Si and Mg activities increased as the temperature of alteration decreased, and secondary Mg-biotite and Mg-phengite crystallized as long as the K activity was sufficient. The crystallizations of secondary biotite and phengite were followed by the crystallization of I/S during stages of low K activity. Secondary hydrothermal phases in the Chanon granite contain substantial Fe and Mg. Secondary hydrothermal phases in the albite-muscovite granite contain only small amounts of Fe and Mg, suggesting a lack of chemical exchange between the enclosing Chanon granite and the albite-muscovite granite, which is depleted in Fe-Mg-rich primary phases, such as biotite.

Vesicular and groundmass phyllosilicates in a hydrothermally altered basalt from the Point Sal ophiolite, California, have been studied using transmission electron microscopy (TEM). Pore-filling phyllosilicates are texturally characterized as having coherent, relatively thick and defect-free crystals of chlorite (14 Å) with occasional 24-Å periodicities. Groundmass phyllosilicates are texturally characterized as 1) randomly oriented crystals up to 200 Å in width and 2) larger, more coherent crystals up to 1000 Å in width. Small crystallites contain predominantly 14-Å layers with some 24-Å units. Large crystals show randomly interlayered chlorite/smectite (C/S), with approximately 50% chlorite on average. Adjacent smectite-like layers are not uncommon in the groundmass phyllosilicates. Electron microprobe analyses show that Fe/Mg ratios of both groundmass and vesicular phyllosilicates are fairly constant.

Termination of brucite-like interlayers has been identified in some of the TEM images. The transformation mechanisms represented by these layer terminations are 1) growth of a brucite-like interlayer within smectite interlayer regions and 2) the dissolution and reprecipitation of elements to form chlorite layers. Both mechanisms require an increase in volume as smectite transforms to chlorite.

The data, combined with that from previously published reports, suggest that randomly interlayered C/S is a metastable phase formed in microenvironments with low water/rock ratios. Chlorite forms in microenvironments in the same sample dominated by higher water/rock ratios. The relatively constant number of Mg's in the structure (Mg#) of both structures indicates that in both microenvironments the bulk rock composition has influence over the composition of phyllosilicates.

The corrensite from a chlorite vein-like rodingite blackwall in serpentinites has been studied. The proper identification of swelling layers in corrensite using heating at 500°C was ambiguous because of the spontaneous rehydration. Even K+-saturated samples heated to 500°C readily rehydrated after being cooled. This can be prevented if XRD patterns are recorded at 300°C, without cooling the sample. A standard heating at 500°C can result in partial decomposition of brucite-like sheet as evidenced by ASN simulation.

The ASN-calculated XRD patterns of contracted corrensite proved that an inhomogeneous distribution of heavy atoms (Fe, Ni, Mn, Cr etc.) between brucite-like sheet and talc-like layers and between two adjacent corrensite units in the interstratified mineral may result in the disappearance of low angle reflections (24 Å and 12 Å), which can lead to miscellaneous interpretation if distribution of heavy cations is not checked.

The corrensite occurred together with regular chlorite. However, it is assumed to be formed due to direct crystallization from late hydrothermal solutions as deduced from comparison of the Mg/(Mg + Fe) ratio in the corrensite, serpentinite and chlorite.

Transmission electron microscopy/analytical electron microscopy (TEM/AEM) were utilized to study pyrite and sphalerite inclusions in chlorite or mixed-layer chlorite-corrensite from an analcimized ash bed in the Etalian stage (Middle Triassic), South Otago, New Zealand. These sulfide inclusions occur as elongated crystals up to 1 × 15 µm in size, within lens-shaped voids between separated, deformed (001) layers of (primarily) chlorite and mixed-layer chlorite-corrensite grains of typical detrital shape or chlorite packets in chlorite-mica stacks (intergrowths of chlorite and phengite packets) up to 40 × 150 µm in size. Relict biotite layers within chlorite, mixed-layer chlorite-corrensite and berthierine have textures implying replacement of the former by the latter, whereas in other unaltered samples only fresh biotite was observed. Anatase occurs in otherwise Ti-free chlorite, whereas relict biotite contains significant Ti (0.3 moles per 22 oxygen atoms). No sulfide minerals have been found in fresh biotite and phengite.

Mass balance considerations indicate that S and Zn were introduced via pore fluids and that the Fe was provided by the decomposition of biotite to secondary phyllosilicates. The alteration of biotite and the reaction of biotite to form chlorite and pyrite is controlled by aH+/aK+ as well as oxidation of reduced S species or reduction of oxidized S species from solution. Simple calculations with the observed compositions of chlorite and biotite suggest that some of the Fe in biotite was actually removed in solution rather than precipitated in pyrite and chlorite. Similar textures are abundant in ferroan phyllosilicates elsewhere, implying that the mechanism may apply widely to precipitation of sulfides in phyllosilicates during early diagenesis of sediments.

Chlorite and corrensite are common clay minerals in lacustrine mudrocks from the Devonian Orcadian Basin, Scotland. The relationship of their occurrence to vitrinite reflectance data demonstrate that they are authigenic minerals, formed during burial diagenesis/metamorphism at temperatures of ≥120°C. Whole rock mineralogical and chemical analyses show that chlorite authigenesis occurred by reactions between the detrital dioctahedral clay mineral assemblage and dolomite that was formed under early evaporitic conditions in the lacustrine environment.

XRD and electron microprobe analyses indicate that phases intermediate between corrensite and chlorite are probably mixed-layer chlorite/corrensite with a tendency towards segregation of layer types. Chemically, the conversion of corrensite to chlorite involves an increase in Al for Si substitution in tetrahedral sites, but there is no change in the Fe/Mg ratio of octahedral cations. There is also no relationship of mixed-layer proportions to paleotemperature; only a general paleotemperature interval of approximately 120° to 260°C in which a range of phases between corrensite and chlorite occurs. Chlorite polytypes are exclusively IIb, indicating the formation of this polytype at diagenetic temperatures.

The occurrence of corrensite and Mg-rich chlorite in evaporite and carbonate successions is probably a reliable indicator of diagenetic alteration at temperatures of ≥ 100°C. Burial diagenetic reactions between dioctahedral clay minerals and Mg-rich carbonates may possibly explain many occurrences of corrensite and Mg-rich chlorite in such rocks.

Hydrothermal synthesis experiments were conducted to study the transition from smectite to corrensite. A mixture of oxides with the bulk composition of corrensite—Na0.4(Si6.4Al1.6)(Mg7.8Al1.2)-O20(OH)10—was sealed in platinum capsules with 29–37 wt. % water. One set of samples was treated in cold-seal vessels at 500°C and 2 kbar for durations of 2, 3, 6, 12, and 24 h; the other set was treated at 350°C and 2 kbar for periods of 12 to 89 d. X-ray diffraction patterns (XRD) of oriented aggregates from treated products were obtained from ethylene glycol-solvated and air-dried preparations. Samples were also heated to 350°C either in a calibrated muffle furnace, removed and quickly placed in a nitrogen filled chamber on the diffractometer, or were heated at 350°C by using a calibrated heating stage mounted on the diffractometer.

Initial mineral assemblages at both temperatures contained only saponite and serpentine. In experiments at 500°C, saponite transformed to corrensite within 6 h; in experiments at 350°C, the transformation occurred as early as 22 d. Increased experiment times at both temperatures produced increasing amounts of well-crystallized corrensite, as indicated by several well-defined XRD peaks. No evidence of a randomly interstratified chlorite-smectite (C-S) precursor to corrensite was found. The identification of pure smectite, as opposed to highly-expanded randomly interstratified C-S, was possible only when clays were dehydrated on a heating stage on the diffractometer.

These results call for a new examination of hydrothermally-altered basalt that has been reported to contain randomly interstratified C-S as an intermediate step in the reaction of smectite to corrensite or chlorite. These results also strengthen the view held by increasing numbers of investigators that corrensite should be regarded as a single phase, not as a mixed-layered phyllosilicate.

The cation exchange capacities (CEC) and extractable cations in smectite, corrensite and palagonitized glass from hydrothermally-altered pillow lavas and hyaloclastite breccias were measured by both bulk wet chemical and in situ microanalytical techniques. Smectite has CEC's between 60 and 120 meq/100 g, palagonitized glass between 30 and 60 meq/100 g, and corrensite approximately 35 meq/100 g as determined by the in situ CsCl-exchange method. These experiments generally verify that Cs exchanges for those cations that are presumed (from the stoichiometry implied by microprobe analyses) to occupy interlayer sites in sheet silicates. Results of conventional CEC determinations are consistent with those determined by the in situ experiments: the individual microanalytical values for smectite and palagonitized glass bracket the bulk CEC values. The in situ experiments imply that Mg is the major extractable cation in smectite, Ca in corrensite, and both Mg and Ca in the palagonitized glass. We speculate that discrepancies between the equivalents of extractable cations predicted from elemental analysis and the equivalents of Cs sorbed may be due to the presence of charge-balancing protons that are not detected by the microprobe analyses. The sum of equivalents of cations extracted by NH4-acetate is about the same as the CEC determined by both the in situ and the bulk methods. Cation proportions indicated by NH4-acetate extractions from bulk samples are also generally consistent with the in situ results for all elements except Mg, which is a minor leachate of the NH4-acetate extractions in all the samples. To explain this discrepancy, we propose that 1) Mg may occupy structural sites within palagonitized glass, which inhibit its extraction by NH4 or Cs, and/or 2) there is a significant quantity of smectite, unsampled by the electron microprobe analyses, which contains insignificant interlayer Mg.

A prograde sequence of corrensite and chlorite in pelitic rocks of the diagenetic zone, anchizone, and epizone (illite crystallinity indices = 0.17–0.58°Δ2θ) of the Gaspé Peninsula, Quebec, was studied by analytical and transmission electron microscopy (AEM and TEM). The data collectively suggest that diagenesis/metamorphism of chlorite and corrensite follows a sequence of phase transitions, compositional homogenization, and recrystallization, approaching a state of equilibrium for which chlorite is the stable phase.

Corrensite occurs as coalescing, wavy packets of layers intergrown with chlorite and illite in the diagenetic and low-grade anchizonal rocks. Intergrowths of discrete chlorite and corrensite crystals, interstratified packets of chlorite and corrensite layers, terminations of smectite-like layers by chlorite layers, and 2–3 repeats of R2- and R3-ordered chlorite-smectite mixed layers occur. These materials are alteration products of detrital biotite or other precursor phases like trioctahedral smectite. The crystal size and proportion of corrensite decrease significantly from the diagenetic zone to the anchizone. Deformed corrensite is crosscut by straight packets of chlorite and corrensite in the diagenetic sample. Some chlorite occurs as discrete, euhedral to subhedral crystals intergrown with or enclosed by other phases in the absence of corrensite. The crystal size of chlorite and definition of crystal boundaries increase whereas density of crystal imperfections and randomness in orientation decrease with increase in grade of diagenesis/metamorphism. Crystals that are kinked or bent, or display gliding along (001) form low-angle boundaries with relatively defect-free crystals, implying deformation during crystal growth. Abundant well-defined low-angle boundaries associated with dislocations are observed in the higher grade rocks, consistent with a stage of readjustment of crystal boundaries during crystal growth. The AEM analyses show that the corrensite has lower Fe/(Mg + Fe) and Al/(Si + Al) than the coexisting chlorite in the diagenetic sample, and that the ranges of composition of chlorite of different grades overlap and become smaller with increasing grade, implying prograde homogenization.

The data imply that corrensite is a unique phase that is metastable relative to chlorite: its conversion to chlorite occurred at a grade as low as that of the high-grade diagenetic zone. The textural relations suggest that the metamorphic crystallization and recrystallization were coeval with deformation processes due to tectonism, partially modified by subsequent contact metamorphism. The data, combined with those of previous reports, suggest that the Gaspé Ordovician rocks constitute a part of a regional distribution of trioctahedral phyllosilicate-rich rocks in the northern Appalachians. The regional occurrence of abundant chloritic minerals is thus directly related to a specific tectonic regime with precursor sediments largely derived from an andesitic arc system(s).

The distribution and crystal-chemical characteristics of chlorite, corrensite, and mica in samples from a stratigraphic profile in the Cameros basin are controlled by changes in the sedimentary facies. The lacustrine marls and limestones from the base and the top of the profile contain quartz + calcite + illite ± dolomite ± chlorite ± albite ± paragonite ± Na, K-rich mica. Chlorite is rich in Mg, with Fe/(Fe + Mg) ratios ranging between 0.18–0.37. A formation mechanism involving reaction between Mg-rich carbonate and dioctahedral phyllosilicates is proposed for these Mg-rich chlorites, on the basis of the mutually exclusive relationship found between Mg-rich chlorite and dolomite, together with the relative increase in the proportion of calcite in samples containing chlorite.

The mudrocks from the middle part of the profile are composed of quartz + albite + illite + corrensite (with a mean coefficient of variability of 0.60%) ± chlorite. Corrensite and chlorite are richer in Fe2+ than those from the base or top of the profile, with mean Fe/(Fe + Mg) ratios of 0.51 and 0.56, respectively. Textural and compositional features suggest a formation mechanism for the corrensite, chlorite, and chlorite-mica crystals through replacement of detrital igneous biotite. Whether or not corrensite occurs with chlorite appears to be related to redox conditions. The presence of corrensite alone is apparently favored by oxidizing conditions, whereas the occurrence of corrensite + chlorite is related to more reducing conditions. Corrensite shows higher Si and Na + K + Ca contents, and slightly lower Fe/(Fe + Mg) ratios than chlorite. The presence of corrensite and the lack of random chlorite-smectite interlayering is discussed in terms of the fluid/rock ratio; the occurrence is related to the hydrothermal character of metamorphism in the Cameros basin.