Field horsetail (Equisetum arvense L.) is a perennial weed native to many areas of the northern hemisphere. Like other horsetail species, field horsetail is a spore-bearing plant from an ancient clade. Unlike some other horsetails, field horsetail is a problematic agricultural weed. It is especially difficult to control in low-tillage cropping systems. Neither chemical nor mechanical tactics are likely to achieve full control in a single operation. However, these tactics may be successfully combined in an integrated weed management program. This review summarizes available information about the biology, ecology, and management of field horsetail. We also note its potential value as a source of pharmaceutical compounds.

The distribution of herbicide-resistant weeds such as waterhemp has resulted in a greater need for a more integrated approach to weed management, especially in U.S. soybean production systems. Previous research has shown harvest weed seed control (HWSC) to be an effective method of reducing the amount of weed seed returning to the soil. One form of HWSC is the use of impact mills to destroy weed seed exiting the combine during harvest. In 2019 and 2020, we investigated the efficacy and operating costs of the Seed TerminatorTM impact mill in five Missouri soybean fields that contained significant waterhemp infestations. Results indicated that 22% to 40% of the available waterhemp seed in the field at harvest drops to the soil surface because of shatter whenever the combine reel contacts waterhemp plants. Across all locations, an average of 94% of waterhemp seed exiting the Seed Terminator™ was substantially damaged and considered nonviable. Consecutive seasons of use of the Seed TerminatorTM on the same field in two of the locations resulted in a 96% to 97% reduction of waterhemp in the soil seed bank the spring following the second harvest. The estimated increased operating cost of using a Seed Terminator™ was $14.18 ha–1 compared to harvesting with a conventional combine alone. Engine load increased by 12.5%, fuel consumption was 11.3 L h–1 and 1 L ha–1 greater with the Seed Terminator™, but there was no reduction in productivity when harvesting with a combine equipped with a Seed TerminatorTM compared to a conventional combine. The use of impact mills could play a significant role in reducing soil weed seed banks in soybean production systems in at least the Midwest region of the United States in the future.

The invasive vine black swallowwort [Vincetoxicum nigrum (L.) Moench = Cynanchum louiseae Kartesz & Gandhi, Apocynaceae] is difficult to control, and herbicide studies are lacking. This long-lived perennial species is primarily found in high-light environments in natural areas and perennial cropping systems in northeastern North America. We conducted a 3-yr herbicide efficacy study, with or without mowing, in an old-field site infested with V. nigrum in Dutchess County, NY, USA. Experimental plots were either herbicide treated in early July or mowed in early July and subsequently herbicide treated in late August for 2 yr with the potassium salt of glyphosate (2.02 kg ae ha−1), the isopropylamine salt of glyphosate (1.35 kg ae ha−1), or the butoxyethyl ester of triclopyr (1.79 kg ae ha−1). Both glyphosate formulations were effective in reducing V. nigrum aboveground biomass, although they were somewhat less effective in reducing cover or stem densities of V. nigrum plants >10-cm tall after 2 yr compared with untreated plots. Mowing did not always enhance the efficacy of foliar glyphosate applications. Triclopyr, with or without mowing, was generally not effective against V. nigrum in our study. The only significant effect of triclopyr was to increase the cover of grasses in the plots. While annual applications of glyphosate can be useful for management of V. nigrum infestations, higher rates and more frequent applications of triclopyr need to be investigated to determine its usefulness for V. nigrum control.

Field experiments were conducted in 2020 and 2021 to determine the effectiveness of electrocution on several weeds commonly encountered in Missouri soybean production using an implement known as The Weed Zapper™. In the first study, the effectiveness of electrocution on waterhemp, cocklebur, giant and common ragweed, horseweed, giant and yellow foxtail, and barnyardgrass was determined. Electrocution was applied when plants reached average heights and/or growth stages of 30 cm, 60 cm, flowering, pollination, and seed set. Electrocution was applied once or twice, at two different tractor speeds. Electrocution was more effective at the later plant growth stages. Pearson correlation coefficients indicated that control of weed species was most related to plant height and amount of plant moisture at the time of electrocution. When plants contained seed at the time of electrocution, viability was reduced from 54% to 80% among the species evaluated. A second study determined the effect of electrocution on late-season waterhemp plants, and also soybean injury and yield. Electrocution timings took place throughout reproductive soybean growth stages. The control of waterhemp escapes within the soybean trial ranged from 51% to 97%. Yield of soybean electrocuted at the R4 and R6 growth stages was similar to that of the nontreated control, but soybean yield was reduced by 11% to 26% following electrocution at all other timings. However, the visual injury and yield loss observed in these experiments likely represents a worst-case scenario because growers who maintain a clear height differential between waterhemp and the soybean canopy would not need to maintain contact with the soybean canopy. Overall, results from these experiments indicate that electrocution as part of an integrated weed-management program could eliminate late-season herbicide-resistant weed escapes in soybean, and reduce the number and viability of weed seed that return to the soil seedbank.

Pale swallowwort (Vincetoxicum rossicum), as well as its congener, black swallowwort (Vincetoxicum nigrum), is a European viny milkweed that has become invasive in natural areas and perennial cropping systems in the northeastern and midwestern United States and southeastern Canada. Mechanical control over 1 to 2 yr has not been effective, but studies of a longer duration are needed. We measured effects of mowing (no mowing or three or six times per growing season) on stem and root crown densities, percent cover, and follicle (seed pod) production of V. rossicum and percent cover of other vegetation over a 7-yr period. Stem density, root crown density, and percent cover of V. rossicum were reduced after 3 to 5 yr of mowing regardless of mowing frequency. Cover of other, mostly nonnative, broadleaf species increased. Follicle production was eliminated in all years of the study. In our environment, mowing three times at monthly intervals during the growing season can prevent seed production. However, mowing must occur for at least 3 yr to reduce, but not eliminate, stands of V. rossicum.

A four-state study was initiated in 1988 to evaluate the influence of cultivation frequency and initiation on the cotton plant. When cultivations were initiated at 1 or 2 wk after emergence and cultivated weekly at a frequency of zero, one, two, four, or six times, seed cotton yields were not affected on a consistent basis. When averaged over cultivation frequency, seed cotton yields were increased for three of nine year-locations when cultivations were initiated at 2 wk after emergence when compared with 1 wk after emergence. At two locations, when seed cotton yields were averaged over initiation timing, it was shown that only two cultivations were necessary to achieve optimum seed cotton yields.

During the 20th century, naturalized saltcedar has become common within major tributaries throughout the western United States. Often growing in nearly monocultural stands, saltcedar is suspected of lowering water tables, thus destroying wetlands and wildlife habitats. Management efforts have primarily relied on mechanical and cultural practices, but recent success in controlling saltcedar with imazapyr has led to wider herbicide use. Based on a number of research/extension field trials in New Mexico from 1987 to present, imazapyr applied alone or in combination with glyphosate was found to control saltcedar to levels of 90% or greater, especially when applied in August or September. For fixed-wing aircraft applications, we recommend applying imazapyr at 1.1 kg ai/ha or imazapyr plus glyphosate at 0.56 plus 0.56 kg/ha. For individual plant treatments, we recommend spraying the foliage to wet with imazapyr at 1% v/v in water, or imazapyr plus glyphosate at 0.5 plus 0.5% v/v. Herbicide activity may be reduced as saltcedar height and stem number increases.

Japanese stiltgrass is one of the most aggressive, rapidly spreading invasive plants in the eastern United States. Management guidelines state that mowing can help manage Japanese stiltgrass but that mowing is most effective when done late in the season after the plants begin to flower and before they set seed. In this study, I tested the effectiveness of mowing at three different times between mid-June and early September in 2009 and 2010, as well as mowing twice in 1 yr and for two consecutive years. The effectiveness of mowing Japanese stiltgrass was determined by measuring percentage of cover, biomass, seed production, and the number of stems in the summer following mowing. All mowing treatments significantly reduced percentage of cover, biomass, seed production, and the number of Japanese stiltgrass stems the following year. In 2009, all of the mowing treatments significantly reduced biomass, percentage of cover, and seed production. The latest mow, at the end of August, resulted in a slightly greater reduction of cleistogamous seeds. In 2010, the earliest mowing treatment, in mid-June, did not reduce cover and biomass as much as the other mowing treatments. Overall, these results suggest that mowing can be an effective control method for Japanese stiltgrass and that mowing any time after June should be effectively equivalent, although later mowing may provide some marginal advantage.

Control options for the nonnative common mullein are of increasing interest to land managers in the west. Common mullein is a prolific seed producer, with a single plant able to produce well over 100,000 seeds. We found that mechanical control of common mullein before mature seed capsules developed along the raceme significantly reduced viable seed production. Seeds from immature capsules had very low viability (early reproductive stage = 0.08%, 95% CI = 0.06%, 0.67%; mid reproductive stage = 1.52%, 95% CI = 0.49%, 3.11%). This information allows managers to time their management efforts so that they can reduce the amount of plant material that must be disposed of in order to control the spread of common mullein seeds.

Japanese barberry is listed as an invasive shrub in 20 states and four Canadian provinces. Control of Japanese barberry was evaluated using several two-step processes over 16 mo using a total of 1,100 clumps at six study areas. Initial treatments in spring (prescribed burning, mechanical mowing with a brush saw or rotary wood shredder) reduced the size of established barberry clumps. Follow-up treatments in midsummer to kill new ramets that developed from surviving root crowns were foliar applications of triclopyr or glyphosate, directed heating with a propane torch, and untreated controls. Mortality was defined as the absence of ramets from a root crown and not the mortality of individual ramets of a given clump. Clump mortality and size of new ramets did not differ among initial treatments. However, larger clumps had higher survival and larger sprouts than smaller clumps 16 mo after initial treatment. Effectiveness of follow-up treatments varied by clump size. Two follow-up treatments of directed heating using propane torches were as effective as herbicides for clumps that were initially smaller than 120 cm. For clumps with pretreatment sizes of 120 cm and larger, clump mortality following herbicide treatments (90%) and directed heating (65%) was greater than for clumps that had no follow-up treatments (35%). Although clump sizes did not differ between follow-up methods 1 yr after treatment, both follow-up treatments resulted in smaller clumps than untreated controls. Effective control of Japanese barberry can be achieved in a single growing season by integrating an early-season initial treatment (prescribed fire or mechanical) that kills the aboveground tissues with a midseason follow-up treatment such as directed heating or targeted herbicide application.

An experiment was initiated to study the effects of rubber benthic barriers vs. aggressive cutting on the invasive aquatic emergent plant, yellow flag iris. Treatments were compared against a control at two locations within British Columbia, Canada (Vaseux Lake and Dutch Lake). Yellow flag iris response was significantly different between the two sites, but biologically the results were identical: the benthic barrier killed yellow flag iris rhizomes within 70 d of treatment. Over the extent of the research, at Vaseux Lake the effect of aggressive cutting was no different from the control, while aggressive cutting was statistically no different than the benthic barrier at Dutch Lake. Vegetation regrowth approximately 200 d after the benthic barriers were removed was not detected at either location. These results indicate that rubber benthic barriers may be an effective treatment for yellow flag iris and maybe suitable for other, similar species.

Japanese stiltgrass, an annual grass species native to eastern Asia, has become a serious invasive-plant problem in the eastern United States. We compared the efficacy of herbicides and nonchemical options found effective for controlling stiltgrass in earlier studies, with organic herbicides and herbicides used at reduced rates in a wooded floodplain along the lower Connecticut River. We compared the effect of 2 yr of conventional and alternative treatments on cover of other nonnative and native species. Four blocks of 18 plots (3 by 4 m [9.8 by 13.1 ft]) were established in May 2008. Treatments included directed heating with a propane torch (June, July), hand-pulling (July), mowing with a string trimmer (July, August), foliar applications of household vinegar [5% acetic acid] (June, July) and the herbicides imazapic (June), pelargonic acid (June, July), and pelargonic acid plus pendimethalin (June). The following herbicides were applied at labeled doses and at one-fourth labeled doses: fenoxaprop-p-ethyl (July), glufosinate (August), and glyphosate (August). Stiltgrass cover and height were evaluated periodically, and plant samples were collected in autumn of 2008 and 2009 to determine the number of viable seeds produced. Final evaluations were conducted in June 2010 after 2 yr of treatment. Stiltgrass cover averaged 88% on untreated plots in fall. All treatments reduced stiltgrass cover and seed production. The least-effective treatments were hand-pulling, pelargonic acid, and vinegar in July. Direct heating, mowing, and vinegar in June reduced seed production by more than 90%. All treatments containing imazapic, pelargonic acid plus pendimethalin, fenoxaprop-p-ethyl, glufosinate, and glyphosate completely prevented stiltgrass seed production in the second year of treatment. Effective control of stiltgrass can be achieved during a 2-yr period with a variety of herbicides, including herbicides at one-fourth of the labeled dose, and through nonchemical treatments.

Japanese hedgeparsley is a biennial plant that invades roadsides, rights-of way, and forested areas in the midwestern United States. Interest in managing populations by mechanical or hand-clipping techniques exists, but no information is available on the appropriate timing to maximize mortality and prevent the production of viable seed. To assess that, we applied clipping treatments at five periods throughout the summer to three Japanese hedgeparsley populations in southern Wisconsin and measured the number and viability of seeds produced by each plant during the year of treatment and the survival of plants clipped. Japanese hedgeparsley plants began producing seed by mid-July, but production was not maximized until early August. Viable seeds were not produced until early or mid-August, coinciding with the presence of ripened brown fruit. Clipping at any timing resulted in > 95% mortality by the fall of the treatment year. All plants that resprouted were in the vegetative stage when clipped, and no plants survived the following year. Results indicate that clipping Japanese hedgeparsley plants when they are in a reproductive phase before fruit turns brown is an effective management strategy for this invasive plant.

The European vines pale swallowwort and black swallowwort are invading various habitats in northeastern North America. It is unclear how these plants might respond to potential biological control agents, as they experience little herbivore damage in North America, or longer durations of mowing given the reported lack of efficacy of mechanical control. We evaluated the effect of six seasons of artificial defoliation (50 or 100% defoliation once or twice per season) and clipping (once, twice, or four times at 8 cm above the soil level) on the survival, growth, and reproduction of mature plants of the two species grown in a common garden field experiment. No plants died from damage after 6 yr. Black swallowwort produced more aboveground biomass, whereas pale swallowwort produced more root biomass and root crown buds, compared with its congener species. For most damage treatments, root biomass and the number of crown buds and stems increased over time, whereas aboveground biomass and viable seeds per plant generally did not change. Substantial overlap in plant size and seed production occurred among damage treatments and species. The most severe defoliation treatment did not substantially limit growth and reproduction compared with undamaged plants. While two clippings per season sometimes prevented seed production, four clippings per season was the only type of damage that consistently prevented plant growth and eliminated seed production. Pale and black swallowwort display a high tolerance to aboveground tissue loss in high-light environments without plant competition. The annual increase in plant size calls into question the potential efficacy of a defoliating insect against field populations of swallowworts, and it seems likely the only benefits of a long-term mowing regime will be to eliminate seed production.

Macartney rose is an aggressive thorny shrub that displaces forage species and hinders cattle grazing in rangelands and pastures of the southern United States. Historically, Macartney rose has proven to be extremely difficult to control even with high rates of soil residual herbicides such as picloram. Recent advances in herbicide chemistry warrant testing on this troublesome species. We compared mowing and late summer broadcast applications of thirteen herbicide treatments that included combinations of aminopyralid, fluroxypyr, metsulfuron, picloram, triclopyr, and 2,4-D. Treatments were applied to the same rose clumps for 2 consecutive yr. An additional mowing was done to one half of the rose clumps in each treatment 6 mo after the second herbicide treatment. At 11 mo after initial treatment (MAIT), mowing and all herbicide treatments performed very poorly and provided 35% control or less. At 12 mo after retreatment (24 MAIT), picloram + 2,4-D and aminopyralid + metsulfuron, both followed by mowing, were the most effective treatments, providing 72 to 91% control. All other treatments provided less than 70% control. However, complete clump mortality was very low across all treatments, ranging from 3 to 32%. These results indicate that Macartney rose suppression is possible with certain new herbicides, but complete clump kill is still lacking.

Greenhouse experiments were conducted in 2011 to evaluate the effect of mowing frequency and mowing height on four summer annual weed species (large crabgrass, barnyardgrass, giant ragweed, and common lambsquarters). Plants were clipped at three heights (5, 10, or 20 cm) and at two frequencies (single clipping or repeated clippings at the same height) to simulate mowing. A nonclipped control was also grown for each species. When clipped once, large crabgrass, barnyardgrass, and giant ragweed produced at least 90% of the total dry weight (DW) of the nonclipped plants, and common lambsquarters produced at least 75%. A single cut was generally not sufficient to prevent weed seed production or kill any of the weeds in this study. Repeated clipping reduced large crabgrass, giant ragweed, and common lambsquarters reproductive DW to 46, 27, and 10% respectively, of the nonclipped control. Barnyardgrass plants that were repeatedly clipped produced between 0 and 8% of the seed DW of nonclipped plants, depending on clipping height. Repeated clipping reduced weed total DW to below 40% for all species compared to nonclipped plants. Our results suggest that, unless combined with other weed management practices, repeated mowing may be necessary to limit the growth and seed production of these weed species.

Effective control techniques for pale swallowwort (PSW), an invasive herbaceous vine of old fields and forest understories, are limited. We conducted a 3-yr cutting and herbicide study on an adjacent old-field and forest understory site near Ithaca, NY, for control of PSW. Plants in experimental plots were cut in early July and cut again or sprayed in late August for two seasons with the isopropylamine salt of glyphosate, or one of two rates (low or high) of either triclopyr triethylamine salt (i.e., SL, SH) or triclopyr butoxyethyl ester (EL, EH). The herbicide treatments were effective in reducing PSW cover, plant (stem) density, and aboveground biomass in the old-field site, but in several cases, only after 2 yr of cutting plus herbicide application. Only the cutting plus SH treatment did not reduce PSW cover relative to the unmanaged control in the forest understory and no treatment reduced biomass. In general, the cutting plus EH treatment was most effective in reducing PSW stem densities in the forest site. The most effective herbicide treatments differed between sites. Cutting plus EH reduced PSW cover by 84% and stem density (> 5 cm) by 86% in the old-field site. Cutting plus SH effectively decreased long and short (≤ 5 cm) stem densities by 86 and 96%, respectively. Cutting plants twice during each of two seasons increased PSW cover by 301% and density of stems > 5 cm by 73% at this site. In the forest site, cutting plus glyphosate, or cutting plus EH or cutting plus SL and EL resulted in the greatest reductions in PSW cover (80, 76, 66, and 56%, respectively). Cover in plots cut twice per year decreased by 19%. The EH or SL treatments decreased long-stem densities by 78 and 71%, respectively. The EH treatment decreased short-stem density by 37%. These findings suggest that integrated techniques may control PSW but that effective management strategies may be habitat constrained.

To assess the effectiveness of interrow cultivation, counts were taken before and after cultivation of corn and soybean during the first two crop rotations in a corn–soybean–spelt organic grain cropping systems experiment. Overall control per cultivation event in soybean was 73%, about equal to the 67% of the interrow area actually covered by cultivator tools. Weed control per cultivation event in corn was higher, and exceeded 91% at later cultivations. The greater weed control in corn relative to soybean, particularly at later cultivations, was probably due to more soil being thrown into the corn row, burying a greater proportion of the weeds. Perennial weeds emerging from roots and rhizomes were less controlled by cultivation events than weeds emerging from seeds. Relatively poor control of perennials was due both to rapid resprouting during the few days between cultivation and assessment and to a lower probability of death in the zone indirectly disturbed by cultivator tools. Seedlings of perennial species suffered greater mortality from cultivation than annual weeds, probably because the low relative growth rate of perennials resulted in small seedlings that were susceptible to cultivation. Common ragweed was less controlled by cultivation than other annual weeds, probably because its heavier seeds produced larger seedlings at the time of cultivation. These larger seedlings were less likely to be buried during hilling-up operations at later cultivations. Counts of weeds before and after individual cultivation events provide insight into the processes affecting weed mortality during mechanical management.

Long-term ecological and economic sustainability will ultimately determine the outcome of any conservation management programme. Invasive alien plants, first recorded in the Kruger National Park, South Africa, in 1937, are now recognized as one of the greatest threats to the biodiversity of this Park. Such plants have been managed in the Park since 1956, with control advancing mainly through a process of trial and error. Refinement of invasive plant management strategies has resulted in an understanding of the target plants' biology and ecology, herbicide use and herbicide-plant interactions, as well as the plant-insect interactions of biological control. Careful integration of different control methods has proved essential to ensure the most appropriate use of techniques to deliver the best possible results from the resources available and achieve long-term sustainability. We outline the development of control efforts and current control programmes and the process of their incorporation into the institutional memory of Kruger National Park over the last 7 decades.