Extraction of reference signal is an indispensable step in the signal processing of polarization diversity passive radar (PDPR) based on a digital television signal. A conventional reference signal extraction method requires an additional reference antenna, which has a certain demand for space. Single dual-polarization antenna passive radar (SDPPR) systems do not require a reference antenna, and the radar station layout is flexible, which is suitable for a large-scale radar network. It is a main research direction of PDPR in future. However, its reference signal extraction needs to rely on the signal reconstruction method. When the signal to interference and noise ratio of the direct-path signal is relatively low, the signal reconstruction method will fail. In this paper, we propose a reference signal extraction method based on sub-carrier processing method, blind adaptive oblique projection technology, and extensive cancelation algorithm to solve the above problem. Experimental results show that the method proposed in this paper is a reasonable alternative after the failure of reference signal reconstruction, and it is an effective supplement to the reference signal extraction technology.

A low-profile multi-polarized MIMO ultra-wideband antenna suitable for body-centric communications is reported. MIMO configuration is achieved using the symmetric heptagonal monopole (SHM) antenna, a mirrored SHM antenna, an asymmetric ruby-shaped monopole (ARSM) antenna, and a mirrored ARSM antenna placed over the modified C-shaped ground plane (MCGP). The proposed antenna elements are designed to achieve resonance for the entire ultra-wideband frequency range. The SHM antenna is coupled with a co-planar waveguide to produce linear polarization. An ARSM antenna generates circular polarization utilizing an asymmetric geometry both in the radiator and a truncated ground plane. Both the SHM antenna and an ARSM antenna are aligned face-to-face over an MCGP plane and good isolation >15 dB is realized between the antenna elements. The gain and total efficiency for linear polarized and the circularly polarized antennas are 3.05–4.8 dBi/48–66% and from 2.8 to 5 dBic/52 to 70.5%, respectively. The specific absorption rate values are evaluated to understand their suitability for WBAN communications.

The novel compact size orthogonally fed 2 x 2 Multiple Input and Multiple Output (MIMO) array antenna for mid-band Fifth Generation (5G) wireless application is presented. The antenna configuration consists of diamond-shaped patches employed at the top of substrate. The V-shaped common ground slot structure is employed at the bottom of substrate. A broadband circular polarization is achieved by simply combining two circular polarization modes obtained from ground V slot and top patch feed structure. Mainly, the impedance bandwidth (IBW) and gain are enhanced by protruding slots on ground and cutting edges of patches. The measured result shows that 1.70 – 8.00 GHz (6.30 GHz) of IBW, 8.8 dBic of peak gain, and 3 dB axial ratio bandwidth from 1.81 – 3.87 GHz (2.06 GHz) are obtained. The proposed antenna performances are experimentally validated by fabricating and testing it for measured result analysis without using power divider.

In this paper, a compact super wideband annular ring antenna using 45° clock-wise square patch inclusions for super high frequency and polarization diversity applications is proposed. The inclusions consist of a combination of squares and circles into one another in the inner area of a main annular ring radiator. The antenna uses a partial ground plane having a stair-type defected ground structure, is designed on an FR-4 substrate, and has a total size of 25 × 26 × 1.6 mm3 (0.17λ × 0.18λ). The design was fabricated and experimental results fairly agreed with simulations and resulted in an antenna with an operating frequency from 2.07 to 30 GHz; that is, a large fractional bandwidth of 174.2$\%$ with a bandwidth (BW) ratio of 14.5:1 and a high BW dimension ratio, BW per unit electrical length of 5693, and a measured peak gain of 8 dBi with an average gain of 5 dBi for the overall operating frequency. For the polarization diversity, a 4 × 4 multiple input-multiple output configuration is additionally presented, offering an effective isolation of ≥ 22.5 dB between ports and corroborated by measurements.

Polarization diversity technology is an effective method to improve the detection performance of passive radar systems, but the related papers mainly conduct research on the polarization diversity in interference suppression, and there are few studies focusing on the polarization characteristics of the target itself. The work in this paper is divided into two parts. The first part is going to investigate the potential benefits of signal fusion in target polarization-scattering characteristic. The analysis results show that the cross-polarized component of the target scattered echo is not always weaker than the co-polarized component, and the polarization amplitude ratio value is mostly concentrated near 1. This indicates that polarization signal fusion will likely improve target detection performance. The other part introduces a polarization signal fusion method based on the non-coherent integration (P-NCI), but this method is susceptible to the influence of the difference in the signal-to-noise ratio (SNR) of the signal of each polarization channel, resulting in a reduction in the SNR of the fusion signal. The polarization signal fusion method based on adaptive weighting (AW-PSF) can effectively improve the robustness of signal fusion. The experimental results show that AW-PSF has better detection performance compared with single-polarization channel and P-NCI.

The present work describes a unique planar low-profile wideband circularly polarized Multiple-Input and Multiple-Output (MIMO) antenna operating in the X-band, with pattern and polarization diversity over the entire axial-ratio bandwidth (ARBW). The design is unique in the sense that a simple grounded stub introduced between two linearly polarized monopole antennas has been used to realize wideband circular polarization, pattern diversity, and high isolation between antennas. The ARBW of the MIMO antenna is 2.45 GHz (8.11–10.56) 3 dB and its impedance matching bandwidth is 3.52 GHz (8.07–11.59). The isolation is better than 20 dB. The antenna can be easily adapted to operate other frequency bands by simple frequency scaling. It has been fabricated on an FR-4 substrate and its performance has been compared against several existing available antennas.

A low profile super-wideband polarization diversity printed monopole antenna with dual band-notched characteristics is presented the first time. The designed antenna comprises two arched shaped radiating elements with two triangular tapered microstrip feed lines (TTMFL) and two arched shaped partial ground planes, which covers an enormously wide impedance bandwidth (BW) from 1.2 to 25 GHz (ratio BW of 20.8:3) for reflection coefficient |S11| < −10 dB. To ensure the high port isolation (better than − 30 dB) between two feeding ports over the whole bands, two analogous antennas have been kept perpendicular to each other at a distance of 1 mm. In addition, the dual band-notched performance in wireless local area network (5–6 GHz) and X-band (7.2–8.5 GHz) is generated by employing a pair of open-circuited stubs (L-shaped stub and horizontal stub) to the TTMFL. Envelop correlation coefficient has been computed to study the polarization diversity performance. Finally, the proposed antenna was fabricated and tested successfully. Measured results indicate that the proposed antenna is an appropriate candidate for the polarization diversity applications. The proposed antenna has a compact size of 40 × 70 × 0.787 mm3, high isolation, and occupies a small space compared with the existing antennas.

In this paper, a single-feed dual-frequency dual-linearly-polarized dielectric resonator antenna is proposed which finds application in two- way internet satellite system and modern radar system. In order to achieve dual linear polarization at distinct frequencies, two rectangular dielectric resonators of same dimensions are excited in ${\rm TE}^{x}_{\delta 11}$ and ${\rm TE}^{y}_{1\delta 1}$ modes by a narrow longitudinal and transverse slot, respectively, etched on the top wall of the substrate integrated waveguide. The −10 dB impedance bandwidth of the proposed antenna is 6.76% for both the frequency bands. The antenna radiates along the broadside direction and the gain of the antenna varies from 5.37 to 6.24 dBi and 5.62–7.96 dBi across 8.14–8.71 GHz and 10.29–11.01 GHz, respectively.

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

This paper proposes planar antennas with quadri-polarization diversity using a pair of orthogonal linear polarizations and a pair of orthogonal circular polarizations (CP). A novel feeding network with four input ports and four output ports is presented, allowing antenna polarization diversity by selecting different input ports, which can generate right-handed CP, left-handed CP, horizontal linear polarization, and vertical linear polarization. The first design uses two square patch resonators to synthesize the four polarizations; the second design comprises four circularly polarized patches to synthesize the four polarizations with an improved axial-ratio (the ratio of orthogonal components of an E-field) bandwidth. The proposed designs do not require for embedding PIN diodes and DC-biasing circuits, making them suitable for use in higher-frequency applications where using lump elements would be difficult. The novel antennas provide potential polarization diversity features which can be used for many applications. Details of the antenna design are shown, and the measurement and simulation results are also provided to validate the proposed concept.