We present a self-biased three-stage GaN-based monolithic microwave integrated circuit low-noise amplifier (LNA) operating between 26 and 29 GHz for 5G mobile communications. The self-biasing circuit, common-source topology with inductive source feedback, and RLC negative feedback loops between gate and drain of the third transistor were implemented to achieve low noise, good port match, high stability, high gain, and compact size. Measurement results show that the LNA has a high and flat gain of 30.5 ± 0.4 dB with noise figure (NF) of 1.65–1.8 dB across the band. The three-stage topology also achieves high linearity, providing the 1 dB compression point output power (P1dB) of 21 dBm in the band. To our knowledge, this combination of NF, gain, and linearity performance represents the state of art of self-biased LNA in this frequency band.

In this paper, a broadband, low insertion loss, and compact folded substrate integrated waveguide (FSIW) phase shifter is proposed for the first time. By loading the complementary split-ring resonators (CSRRs) on the middle metal layer of the FSIW, a closed-type slow-wave transmission line (TL) is obtained, which can provide a wideband phase shift (39%) compared with the equal-length fast-wave one. The enclosed structure of the CSRR-loaded FSIW prevents the CSRRs from radiation as suffered in the previous reported CSRR-loaded TLs, resulting in a low insertion loss. This feature greatly reduces the amplitude imbalance between the main line and the reference line of the phase shifter. In addition, no transition structure is required between the FSIWs with and without CSRRs for broadband impedance matching, which makes the phase shifter more compact and easier to integrate with other FSIW devices. To validate the performance of the proposed phase shifter and to illustrate its ease integration, a novel FSIW 180° directional coupler that consists of an FSIW 90° coupler and an FSIW 90° phase shifter is designed, fabricated, and measured. The measured results agree well with the simulated data.

A low-profile multi-polarized MIMO ultra-wideband antenna suitable for body-centric communications is reported. MIMO configuration is achieved using the symmetric heptagonal monopole (SHM) antenna, a mirrored SHM antenna, an asymmetric ruby-shaped monopole (ARSM) antenna, and a mirrored ARSM antenna placed over the modified C-shaped ground plane (MCGP). The proposed antenna elements are designed to achieve resonance for the entire ultra-wideband frequency range. The SHM antenna is coupled with a co-planar waveguide to produce linear polarization. An ARSM antenna generates circular polarization utilizing an asymmetric geometry both in the radiator and a truncated ground plane. Both the SHM antenna and an ARSM antenna are aligned face-to-face over an MCGP plane and good isolation >15 dB is realized between the antenna elements. The gain and total efficiency for linear polarized and the circularly polarized antennas are 3.05–4.8 dBi/48–66% and from 2.8 to 5 dBic/52 to 70.5%, respectively. The specific absorption rate values are evaluated to understand their suitability for WBAN communications.

This paper presents a compact ultrawideband slotted patch antenna for early stage tumor detection applications using microwave breast imaging systems. In order to reduce any reflections between the antenna and breast, the antenna is designed and optimized inside a coupling medium with electrical properties similar to that of normal breast tissue as a coupling medium. The wideband performance of the antenna is obtained by adding a rectangular slit and L-shaped sleeves on the ground plane. While the added rectangular slit mainly improves the matching, the L-shaped sleeves improve both the matching and the bandwidth. The antenna operates from 0.9 to 9.6 GHz with a fractional bandwidth of ~165$\%$, providing a good penetration and resolution. In addition, the proposed antenna has a very compact size of 16 × 16 mm2. Furthermore, an antenna array consisting of 31 antennas is formed around a realistic breast phantom in the simulation environment to demonstrate the imaging of a spherical tumor with a diameter of 5 mm inside the breast. The results confirm that the proposed antenna can be used for early stage breast tumor detection purposes.

This article presents wideband metamaterial cross-polarizer (MCP) structure for X-band applications. The proposed MCP consists of a splitted square-shaped resonating structure with two inner and one outer stub. It has an overall dimension of 8.6 mm × 8.6 mm. A wideband polarization conversion ratio (PCR) above 0.87 magnitude is achieved with a bandwidth of 3.49 GHz ranging from 8.8 to 12.29 GHz, which works for X (8–12 GHz) band. The PCR bandwidth of full width half maxima achieved is 4.55 GHz ranging from 8.5 to 13.05 GHz. Two distinct PCR peaks are observed at 9.44 and 11.47 GHz with PCR magnitude at 99.39 and 99.00% respectively. The normalized impedance and electromagnetic parameters (real and imaginary) curves proved the presence of metamaterial properties in the region of interest. Analysis of polarization conversion phenomena at two distinct frequencies is described with the help of electric field and current distribution. The structure is replicated using ANSYS HFSS 19.1 and measured inside anechoic chamber with the help of Vector Network Analyzer (VNA). The replicated and experimented responses obtained are almost similar to one another with adaptation due to fabrication liberality.

This work demonstrates a novel, reflective-type, dual-polarized multiband polarization transformer for various C to Ku band applications. The design constitutes a top FSS printed on a thin FR-4 grounded dielectric substrate. A y/x-polarized incident wave experiences linear-circular conversion from 4.61 to 4.71 GHz (right-hand circular polarized (RHCP)/left-hand circular polarized (LHCP)), 5.44 to 7.68 GHz (LHCP/RHCP), 10.13 to 14.98 GHz (RHCP/LHCP), and 16.68 to 17.19 GHz (LHCP/RHCP) with 3.41, 34.15, 38.63, and 3.01% FBW, respectively. In addition, it performs linear-cross conversions with a minimum 90% polarization conversion ratio (PCR) from 4.92 to 5.18 GHz, 8.32 to 9.41 GHz, and 15.56 to 16.25 GHz with 5.15, 12.30, and 4.34% FBW. Multiple surface plasmonic resonances are responsible for these polarization conversions in different bands. The device performance is angular stable for both transverse electric (TE) and transverse magnetic (TM) incidences. The design novelty lies in compacted periodicity 0.112λL, low-profile thickness 0.037λL with a multi-conversion (switching the orthogonal circular rotation in consecutive bands), and stable angular response, which can potentially be used in real-time applications.

This paper presents a polarization switchable self-oscillating active integrated array antenna (AIAA) using a multi-layer approach. The antenna comprises two antenna elements, four PIN diodes, and a Gunn oscillator employing a microstrip line resonator. Reconfiguring the feed network of the array antenna realizes slant polarization (± 45°) switching. The multi-layer structure allows the patch spacing to be adjusted, thereby helping to minimize the antenna's sidelobe level. The Gunn oscillator, which employs a λ/2 microstrip–line resonator, is placed at the bottom layer. The proposed AIAA has an effective isotopic radiated power (EIRP) of + 18.25 dBm at the oscillation frequency of 9.47 GHz. EIRP is improved by better than 8.45 dB compared to the single-layer structure. The proposed AIAA features a transmitted power of + 8.45 dBm, DC-to-RF efficiency of 1.0%, and a low phase noise of −101.8 dBc/Hz at 1-MHz offset frequency with better than 12-dB cross-polarization suppression.

In this article, an ultra-wideband printed flexible monopole antenna is proposed for indoor wireless communications. A flexible Rogers RO3003 is used as a substrate, and its performance is estimated for a flat state and when subject to bending along the y-axis. A 2.45 and 5.8 GHz dual-band textile artificial magnetic conductor (AMC) surface consisting of a 4 × 4 unit-cell array was integrated into antenna design with optimum separation distance to extend its potential applications to wearable on-body communications. The specific absorption rate (SAR) levels were numerically investigated using the Hugo human voxel model at both frequencies to evaluate the on-body safety level. Detailed analysis is presented for antenna designs of flat and bent states in free space and on the human body. The proposed UWB flexible antenna has the size of 41 × 38 × 0.25 mm (0.33λ0 × 0.31λ0 × 0.002λ0 at 2.45 GHz). It was added at a distance of 3 mm above a textile AMC surface of 99 × 99 mm. The integrated model is fabricated and experimentally characterized. Measured data and numerical results show that the impedance matching and radiation characteristics are slightly affected by introducing the bending and human body loading. With these remarkable features, the integrated model can be utilized for wireless indoor and wearable applications.

A frequency reconfigurable microstrip patch antenna with a combination of an asymmetric armed U-slot and a reversed L-slot etched on a rectangular base patch of 6 GHz resonant frequency designed on an FR4 substrate (ɛr = 4.4) is presented in this paper. Three RF PIN diodes are positioned at inimitable sites of these slots to achieve frequency reconfiguration. A DC bias circuitry, which includes DC blocking capacitors and RF blocking inductors, is integrated with the antenna structure for switching (ON/OFF) the PIN diodes. Six reconfigurable modes with resonant frequencies at 4.33, 4.63, 5.24, 5.87, 5.96, and 6.29 GHz is obtained with different ON-OFF combinations of these PIN diodes. These reconfigurable resonant frequencies cover two continuous bands from 4.21 to 5.43 GHz and 5.69 to 6.6 GHz and is considered to be useful for the applications like aeronautical radio navigation (4.3 GHz), sub-6-GHz 5G (4.4–5 GHz), WLAN (5.2 and 5.8 GHz) and Wi-Fi 6E (5.925–6.425 GHz). Measured gain of the antenna for all the modes varies between 5.86 dBi and 8.72 dBi.

A gain enhanced dual-band filtenna operating at frequency bands of 3.5 and 5.3 GHz for 5G sub-6 GHz applications is presented in this article. A dual-band antenna is integrated with a filter to improve selectivity. The antenna uses printed monopoles as the radiating element, and the filtering response is achieved using a modified feedline. The designed filtenna is 50 × 38 × 1.63 mm3 in size with a maximum gain of 2.5 dBi. The novel filtenna design is equipped with an artificial magnetic conductor (AMC) for the first time to enhance the performance. A unit cell for the AMC is designed that offers zero phase shift in the desired frequencies. A four by four AMC array is designed using this unit cell, which is used as a reflective surface to improve the radiation characteristics of the filtenna. The gain of the filtenna is improved three times up to 7.5 dBi in both bands. The proposed design's overall planar dimensions are 80 × 80 mm2. Using AMC, the gain has improved with a very minute or no change in the other characteristics. The measured results are congruent with the simulated ones, illustrating that the filtenna has good impedance matching and excellent gain in both bands.

Antennas installed on aircraft are used for communications as well as for various radio navigation systems such as direction finders, distance measuring systems, and altimeters. Generally, these systems use blade antennas operating in the L frequency band. Recently, inverted-hat empty section monopole antennas have been found to be good candidates for such uses. In this study, we propose a new design of inverted-hat antenna based on optimized elliptical shapes and a filled cavity. The dielectric material added in the cavity helps to improve the monopole stability and to adjust the resonant frequency of the antenna. The proposed antenna meets the distance measuring equipment requirements, namely an omnidirectional radiation pattern in the H-plane, a vertical polarization, a frequency band from 960 MHz to 1.22 GHz, and a gain better than 1 dB. This antenna is entirely made of aluminum in order to obtain a homogeneity with the aluminum fuselage. In addition, the solution proposed brings a better protection against weather conditions. The antenna performance is analyzed on the basis of simulation and measurement results.

This paper proposes a wide band and multiband frequency reconfigurable antenna that can operate in the UWB, GSM, GPS, 4G LTE, WLAN, and WiMAX bands. The antenna is made up of a trapezoidal-shaped monopole radiator, which was inspired by a rectangular monopole antenna. The ground plane is modified by embedding T and L-shaped slots to notch the desired operating frequency. The proposed antenna can switch to six different frequencies using RF PIN diodes, making it suitable for modern wireless applications. A multilayer frequency selective surface (FSS) reflector is presented to improve the gain of the proposed reconfigurable antenna. The low-profile design achieved a significant increase in gain while retaining the UWB antenna's excellent impedance bandwidth. Because of the use of the FSS reflector, the antenna's average peak gain has increased from 6 to 10.4 dBi. The proposed antenna has a wide switching capability, which validates its unique feasibility for high-speed multiple Internet of Things applications via a common embedded platform under various applications.

In the design of the filter antenna, the filter unit with the same structure as the radiation patch not only improves the selectivity of the band edge, but also helps to improve the in-band impedance. In this design, a compact circular monopole filtering antenna with improved sideband selectivity and in-band impedance using a circular-stub-load resonator is proposed. To obtain better sideband selection characteristics and in-band impedance characteristics, and reduce the mismatch problem caused by the introduction of the filter, a branch-loaded filter with the same resonance mode as the antenna radiation patch is designed. In addition, different shape branch loading structures of the bandpass filter are also studied. The experimental results show that when the loading unit of the filter and the radiation structure of the antenna have the same structure, both good in-band impedance characteristics and sideband selectivity characteristics can be obtained from the filter antenna. The antenna reflection coefficient bandwidth is from 3 to 11 GHz (114%), and the maximum reflection coefficient is only −15 dB, showing good in-band impedance characteristics and sideband selection characteristics. The filter antenna realizes the integration of antenna filtering without increasing the size, and the final size of the antenna is 30 × 25 mm2.

The novel compact size orthogonally fed 2 x 2 Multiple Input and Multiple Output (MIMO) array antenna for mid-band Fifth Generation (5G) wireless application is presented. The antenna configuration consists of diamond-shaped patches employed at the top of substrate. The V-shaped common ground slot structure is employed at the bottom of substrate. A broadband circular polarization is achieved by simply combining two circular polarization modes obtained from ground V slot and top patch feed structure. Mainly, the impedance bandwidth (IBW) and gain are enhanced by protruding slots on ground and cutting edges of patches. The measured result shows that 1.70 – 8.00 GHz (6.30 GHz) of IBW, 8.8 dBic of peak gain, and 3 dB axial ratio bandwidth from 1.81 – 3.87 GHz (2.06 GHz) are obtained. The proposed antenna performances are experimentally validated by fabricating and testing it for measured result analysis without using power divider.

This research reports a four-port multiple-input-multiple-output (MIMO) antenna designed for 5G-NR band applications including n77: 3.30–4.20 GHz, n78: 3.30–3.80 GHz, and n79: 4.40–5.00 GHz. The proposed design is analyzed in two parts, one single-element asymmetrical fed Calendula flower-shaped antenna and the other four-port modified MIMO antenna with the connected ground. The evolution of the MIMO antenna is studied based on the characteristics and optimized single-element antenna. The measured 5G-NR bandwidth offers a very high matching of impedance for MIMO configuration and higher isolation in the same band. The MIMO antenna offers an average peak gain of 3.51 dBi with a radiation efficiency of more than 90%. The radiation patterns plotted at 3.51, 4.00, 4.50, and 5.00 GHz match with almost omni-directional and dipole patterns in H- and E-radiating planes respectively. The MIMO antenna also records good diversity performance (ECC, DG, CCL, MEG, and TARC) in n77, n78, and n79 5G bands.

This paper presents a novel decoupling technique for two-element multiple-in multiple-out (MIMO) antennas for smartwatch applications with floating metallic bezel. The radiating elements consist of embedded loop-type ground-radiation antennas and operate at the 2.45 GHz Bluetooth/Wi-Fi bands. An isolator, consisting of a loop-type structure with a lumped capacitor, is attached externally to the ground plane such that wideband isolation between the antennas has been achieved. It is demonstrated that the small-sized isolator is coupled with the large-sized bezel surrounding the ground plane, where the bezel operates as a low-Q decoupler between the antenna elements producing wideband isolation property. Accordingly, optimized results can be obtained by controlling the location of the isolator, the gap between the isolator and the bezel, and the loaded capacitor. Simulation and measured results have been presented to validate the design performance. The measured −10 dB impedance bandwidth of both antenna elements is more than 210 MHz, whereas the isolation bandwidth is 770 MHz with reference to 20 dB. The envelop correlation coefficient is <0.1 in the operating band. Furthermore, the proposed technique is versatile regardless of the angular separation of the antenna elements on the circular ground plane, which makes it a good candidate for smartwatch MIMO applications in practical scenarios.

Dielectric resonator antennas (DRAs) are developed antennas that are lightweight, wideband, small-sized and have high radiation efficiency. A DRA is an appropriate candidate for any radio communication including radar applications mainly because of its high efficiency and wideband performance. As the development of DRAs has been a continuous process for more than five decades the plethora of the same has become magnificent in all possible ways. Scientists have walked the technical path for more than centuries and tried to meet the various challenges in the most graceful ways. Reduction of loss, lightweight, and desired radiation patterns are some of the issues which are effectively met by DRAs. This paper presents a brief comprehensive review of the state of art techniques, giving an exhaustive idea of achieving broadband and multi-frequency operations in the areas of DRAs. The paper associates the references of the past and correlates with the current and future trends of research in DRAs that could be of immense help to the young upcoming researchers interested in this field.