Numerous occurrences of asbestos minerals, notably chrysotile and tremolite, are to be found on fracture surfaces in thrust fault deformation zones of Cretaceous dunite-harzburgite and pyroxenite in the Çankırı and Ankara regions, central Anatolia, Turkey. Consequently, potential exists for the development of regional malignant mesothelioma. The means of serpentinization, such as reaction of seawater during accretion of the upper ophiolitic mantle crust in a subduction zone and/or following uplift of ophiolitic units and the influence of hydrothermal/meteoric fluids along fractures, were investigated. Cretaceous dunite-harzburgite and localized pyroxenite rocks are mainly composed of serpentinized olivine and pyroxene associated with opaque minerals and Fe-(oxyhydr)oxide phases. Smectite, chlorite, illite, kaolinite, hydromagnesite, goethite, quartz, and opal-CT are also present. Chrysotile and localized tremolite occur either as a mesh, a suboriented to oriented long-fiber bundle, or as fiber-filling millimetric micro-vein textures on relicts of olivine and pyroxene (enstatite, augite). The chrysotile and tremolite have non-pseudomorphic textures developed under high pressure and temperature. The textures suggest authigenic formation of chrysotile and tremolite via a dissolution and precipitation mechanism. Additionally, spherical structures of opal-CT and locally platy hydromagnesite crystals either enclose or are developed within chrysotile/tremolite fiber bundles. The leaching of MgO, Fe2O3, Al2O3, Ni, Cr, and Nb, an increase in the LREE/HREE ratio, and negative Eu anomalies in the dunite-harzburgite and pyroxenite, and asbestos samples suggest that the chrysotile and tremolite were derived from the serpentinization of olivine and pyroxene. The chrysotile and tremolite were developed along fractures by hydrothermal fluid alteration during accretion and/or following the uplift of ophiolitic units of the region under high pressure and temperature conditions. This interpretation is also supported by isotope data and the calculated formation temperature of 170–555°C for chrysotile and tremolite. The average structural formulae for chrysotile and tremolite are (NanK0.03)(Mg5.54Fe0.09Al0.05Ca0.01Mn0.001) (Si3.96Al0.03)O10(OH)8 and (Na0.17K0.07)(Ca1.59Mg0.19Mn0.002)(Mg4.72Fe0.28)(Si7.86Al0.1Fe0.06)O22(OH)2, respectively.

Thermal behaviour of fibrous tremolite from Maryland, USA has been investigated in situ up to breakdown temperature. Tremolite can be found both as primary constituent and as contaminant in Asbestos Containing Materials (ACMs). The products of breakdown are subcalcic diopside and calcium-rich clinoenstatite in a 2:1 ratio, traces of hematite plus minor silica-rich amorphous material. Thermal expansion follows a regular trend up to 723 K before the onset of Fe2+ oxidation/OH– deprotonation which is completed at 1023 K. At 923 K the Fe3+ migration starts towards M(1) and the corresponding counter-migration of Mg to M(2) and M(3). At T close to structure breakdown, M(2) shows a significant site-scattering reduction possibly consistent with the occurrence of minor vacancies. In fully oxidised tremolite, Fe3+ is allocated prevalently at M(1) and subordinately at M(3). As it is well-known that M(1), along with M(2), is the most exposed octahedral site at the surface of amphiboles, most of the Fe3+ is available for participating in the Fenton-like reactivity of oxidised tremolite, potentially making it dangerous for human health. This point should be properly taken into account in the evaluation of the safety of thermally decomposed tremolite-containing ACMs, in particular in the case of accidentally incomplete treatments.

Steady-state tremolite dissolution rates, at far-from-equilibrium conditions, were measured as a function of aqueous silica and magnesium activity, pH from 1.9 to 6.7, and temperature from 25 to 150ºC. Calcium is released from tremolite faster than either Mg or Si throughout most of the experiments even after these latter elements attained steady-state release rates. The preferential removal of Ca releases fine Mg-Si rich needle-like fibres from the tremolite, probably promoting its toxicity. In contrast, Mg was released in stoichiometric or near to stoichiometric proportion to Si once steady-state was attained. Measured steady-state tremolite dissolution rates based on Si release can be described using

where r+ signifies the BET surface area-normalized forward tremolite steady-state dissolution rate, AA refers to a pre-exponential factor = 6610–3 mol cm–2 s–1, EA designates an activation energy equal to 80 kJ mol–1, R represents the gas constant, T denotes absolute temperature, and ai refers to the activity of the subscripted aqueous species. This rate expression is consistent with tremolite dissolution rates at acidic pH being controlled by the detachment of partially liberated silica tetrahedra formed from the exchange of Mg2+ for two protons near the mineral surface after the near-surface Ca has been removed. Nevertheless, Mg release rates from tremolite are ~3 orders of magnitude slower than those from forsterite and enstatite suggesting that tremolite carbonation will be far less efficient than the carbonation of these other Mg-silicate minerals.

Two specimens of tremolite and one of richterite, all with nephrite jade texture, have been examined by transmission electron microscopy using ion-thinning for specimen preparation. The specimens contain clusters of very small lath-like crystallites with z-axes approximately parallel but in a range of azimuthal orientations. It is suggested that these clusters which are themselves in varied orientations are the result of post-tectonic recrystallization of strained amphibole crystals, the new crystals inheriting the z-axis orientations of the old. The extreme toughness of nephrite jade is attributed to a number of the sub-microscopic features observed, including the sizes, habits, and orientations of its crystallites, and the nature of its grain boundaries.

Quantitative measurement of relative flexibility have been made on amphibole fibres based on calculation of bending strain of maximally bent fibre segments. Enhanced flexibility was found to be an inverse function of fibre diameter. Asbestos is therefore a morphological entity. These conclusions are supported by consistent observations of fibre diameter/flexibility relationships in amphiboles, serpentine, and rutile. Flexibility may arise from growth of thin crystals (primary flexibility), or from crystal diameter reduction (secondary flexibility). Mechanisms for secondary flexibility in amphiboles include splitting and solution along cleavage planes. Gross morphological characteristics are a poor indicator of microscopic habit, since coarsely fibrous minerals such as picrolite antigorite may not be fibrous after particle width reduction, and secondary asbestiform fibres are often derived from minerals with a non-fibrous morphology on gross examination.

The prismatic variety of fluoro-edenite, a new amphibole found in lavas from Mt Etna in Biancavilla (Catania Province, Sicily, Italy), has been characterized by μ-Raman and μ-FTIR spectroscopy. The wavenumbers at which the bands are detected in the μ-Raman and μ-FTIR spectra are compared with tremolite, asbestos the chemical and crystallographic characteristics of which are very similar to those of fluoro-edenite.

Small (m-scale) peridotite enclaves at Planany (central Czech Republic) are separated from their gneissic host rocks by a narrow (cm-scale) reaction rim comprising an inner, tremolite + phlogopite zone and an outer, essentially monomineralic phlogopite zone. Both retain an Mg# very similar to that of the peridotite (Mg# = 81), but relative to this reference frame, show large increases in LILE (K, Rb, Ba) and radionuclides (U, Th). On a smaller scale, however, there has been a mineralogically-controlled decoupling of various components, particularly among the HFSE and REE, the former favouring the phlogopite-rich outer layer of the reaction rim, the latter the amphibole-rich inner zone. Taken together, however, the reaction zones preserve key compositional features of their inferred protolith.

Amphiboles of the tremolite-ferro-actinolite series from the Bergslagen district in central Sweden have between 0 and 46% of their M1-M3 sites occupied by Mn. These amphiboles are divided into two groups; (1) a group characterised by Mn (M1-M3) > (Mg or Fe) (M1-M3), and (2) a group with much lower contents of Mn (M1-M3), showing the following chemical characteristics: (a) Mn (M1-M3) never exceeds Fe (M1-M3); (b) in Mg-rich members of the group [Mg (M1-M3) > (Mn or Fe) (M1- M3)], the highest amounts of Mn (M1-M3) occur in amphiboles with about 2.20 Mg (M1-M3) per formula unit (pfu); in Fe-rich members of the group Fe [(M1-M3) > (Mg or Mn) (M1-M3)] high amounts of Mn (M1-M3) [> 0.4 Mn (MI-M3)] pfu only occur in amphiboles with >3.40 Fe (M1-M3) pfu; (d) the lowest amounts of Mn (M1-M3) occur in amphiboles with Mg (M1-M3) = Fe (M1-M3).

Mn (M4) increases with increasing amounts of Mn (M1-M3), indicating that solid solution towards the tirodite-dannemorite series is enhanced by incorporation of Mn (M1-M3).

During systematic characterization of amphiboles that still lack a complete mineral description, fluoro-tremolite was identified in a specimen from the Limecrest-Southdown quarry, Sparta, New Jersey, USA, which was provided by the Franklin Mineral Museum. The ideal formula of fluoro-tremolite is A□ BCa2CMg5TSi8O22WF2 and the empirical formula derived for the holotype specimen, based on the results of electron-microprobe analysis and single-crystal structure refinement, is A(Na0.28K0.02)Σ0.30B(Ca1.99Na0.01)Σ2.00C(Mg4.70${\rm Fe}_{{\rm 0}{\rm. 28}}^{{\rm 2 +}} $Zn0.01${\rm Ti}_{{\rm 0}{\rm. 01}}^{{\rm 4 +}} $)Σ5.00T(Si7.68Al0.32)Σ8.00O22W(F1.16OH0.84)Σ2.00. The unit-cell dimensions in space group C2/m are a = 9.846(2), b = 18.050(3), c = 5.2769(14) Å, β = 104.80(2)° and V = 906.7 (3) Å3 and Z = 2; the a:b:c ratio is 0.545:1:0.292. Fluoro-tremolite is biaxial (+), with α = 1.5987(5), β = 1.6102(5), γ = 1.6257(5), 2V(meas.) = 85(1)o and 2V(calc.) = 82o. The strongest ten reflections in the powder X-ray pattern [d values (in Å), I, (hkl)] are: 2.706, 100, (151); 3.126, 67, (310); 2.531, 59, ($\bar 2$02); 3.381, 57, (131); 2.940, 43, ($\bar 1$51, 221); 3.276, 37, (240); 2.337, 36, ($\bar 3$51); 2.592, 35, (061); 2.731, 34, ($\bar 3$31); 2.163, 34, (261). Both the mineral and the mineral name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2016–018); the holotype has been deposited at the Franklin Mineral Museum (32 Evans Street, Franklin, 07416 New Jersey, US), under the catalogue number 7710.

Comparison with new data on tremolite and synthetic fluoro-tremolite provides a more sound crystal-chemical model of the end-member compositions and their solid-solution.

Because of widespread tremolite and chrysotile minerals in Palaeozoic-Mesozoic metamorphic and Triassic ophiolitic units, respectively, in the Eskişehir region, Turkey, there is significant potential for development of cases of mesothelioma. Such occurrences in the Eskişehir region show a positive correlation with the concentration and dimension of tremolite crystals compared with those of chrysotile crystals. A detailed assessment of the mineralogy, geochemistry and genesis of these materials has not been carried out to date; the present study was undertaken to fill that gap. The sharp diagnostic basal reflections at 8.14 Å, 3.09 Å and at 7.30 Å, 3.63 Å, well defined fibrous crystallinity, and ideal differential thermal analysis-thermal gravimetric and Raman curves suggest the development of well crystallized fibrous/acicular tremolite and chrysotile with the average structural formulae of: (Na0.07K0.03)(Ca1.68Mg0.18Mn0.01)(Fe0.42Mg4.55Ti0.01)(Si7.60Al0.24Fe0.16)O22(OH)2, and (Mg5.55Fe0.41 Mn0.006)(Si3.79Al0.13)O10(OH)8, respectively.

Enrichment of light rare earth elements relative to medium rare earth elements and heavy rare earth elements in tremolite compared to that of chrysotile which exhibits no anomaly and negative anomalies for Ba, Sr, Ce, Nb, Yand Zr in the tremolite samples and chrysotile, are responses to the fractionation of feldspar, glaucophane, pyroxene and olivine under the high temperatures of hydrothermal-alteration processes during serpentinization and the high-pressure conditions of metamorphism. Based on H and O isotope data, the tremolite and chrysotile are thought to have developed from tectonically controlled magmatic and meteoric hydrothermal systems and the formation temperatures of the tremolite are higher than those of chrysotile.