This paper presents an integrated optimal control framework for velocity and steering control of an autonomous pursuit vehicle, where the control objectives satisfy the requirements of collision avoidance and moving target tracking. A distinctive feature of the proposed velocity and steering control is the application of logarithmic penalty functions to both. The control barrier imposed by logarithmic function provides a unique tool in computing a balanced trajectory with optimal tracking error, control effort and safety margin. Trajectories compliant with the safety regulations for autonomous driving have been planned based on estimated intention of the target and the obstacles. Effects of the controller weights have been extensively simulated to assess the performance of the proposed strategy in a variety of dynamic situations. The controller has been validated on a real-life robot by using a shrinking horizon control policy for iterative optimisation.

This study is concerned with the tracking control problem for nonlinear uncertain robotic systems in the presence of unknown actuator nonlinearities. A novel adaptive sliding controller is designed based on a robust disturbance observer without any prior knowledge of actuator nonlinearities and system dynamics. The proposed control strategy can guarantee that the tracking error eventually converges to an arbitrarily small neighborhood of zero. Simulation results are included to demonstrate the effectiveness and superiority of the proposed strategy.

As an important index to quantitatively measure the motion performance of a manipulator, motion reliability is affected by many factors, such as joint clearance. The present research utilized a UR10 manipulator as the research object. A factor mapping model for influencing the motion reliability was established. The link flexibility factor, joint flexibility factor, joint clearance factor, and Denavit–Hartenberg (DH) parameters were comprehensively considered in this model. The coupling relationship among the various factors was concisely expressed. Subsequently, the nonlinear response surface method was used to calculate the reliability and sensitivity of the manipulator, which provided an applicable reference for its trajectory planning and motion control. In addition, a data-driven fault diagnosis method based on the kernel principal component analysis (KPCA) was used to verify the motion accuracy and sensitivity of the manipulator, and joint rotation failure was considered as an example to verify the accuracy of the KPCA method. This study on the motion reliability of the manipulator is of great significance for the current motion performance, adjusting the control strategy and optimizing the completion effect of the motion task of a manipulator.

Human gait data can be collected using inertial measurement units (IMUs). An IMU is an electronic device that uses an accelerometer and gyroscope to capture three-axial linear acceleration and three-axial angular velocity. The data so collected are time series in nature. The major challenge associated with these data is the segmentation of signal samples into stride-specific information, that is, individual gait cycles. One empirical approach for stride segmentation is based on timestamps. However, timestamping is a manual technique, and it requires a timing device and a fixed laboratory set-up which usually restricts its applicability outside of the laboratory. In this study, we have proposed an automatic technique for stride segmentation of accelerometry data for three different walking activities. The autocorrelation function (ACF) is utilized for the identification of stride boundaries. Identification and extraction of stride-specific data are done by devising a concept of tuning parameter ( $t_{p}$ ) which is based on minimum standard deviation ( $\sigma$ ). Rigorous experimentation is done on human activities and postural transition and Osaka University – Institute of Scientific and Industrial Research gait inertial sensor datasets. Obtained mean stride duration for level walking, walking upstairs, and walking downstairs is 1.1, 1.19, and 1.02 s with 95% confidence interval [1.08, 1.12], [1.15, 1.22], and [0.97, 1.07], respectively, which is on par with standard findings reported in the literature. Limitations of accelerometry and ACF are also discussed. stride segmentation; human activity recognition; accelerometry; gait parameter estimation; gait cycle; inertial measurement unit; autocorrelation function; wearable sensors; IoT; edge computing; tinyML.

In study this paper, a geometric formulation is proposed to describe the workspace of parallel manipulators by using a recursive approach as an extension of volume generation for solids of revolution. In this approach, the workspace volume and boundary for each limb of the parallel manipulator is obtained with an algebraic formulation derived from the kinematic chain of the limb and the motion constraints on its joints. Then, the overall workspace of the mechanism can be determined as the intersection of the limb workspaces. The workspace of different kinematic chains is discussed and classified according to its external shape. An algebraic formulation for the inclusion of obstacles in the computation is also proposed. Both analytical models and numerical simulations are reported with their advantages and limitations. An example on a 3-SPR parallel mechanism illustrates the feasibility of the formulation and its efficiency.

This work deals with the elastostatic identification of industrial manipulators. By reviewing the basics of the physical elastic properties of both links and joints in the framework of the lumped stiffness modeling techniques, the Gramian nature of the stiffness matrices has been found out adequate to do so. Then, a novel optimization method has been developed, which incorporates the Gramian matrix formulation along a non-linear optimization process, acting as an intrinsic constraint for the conservativeness of the elastostatic modeling. Numerical and experimental analyses evince the effectiveness of the proposed method, as the elastostatic models obtained by means of the proposed technique predict more than 93.7% of the compliance deviations of a real industrial robot. The proposed method is simple enough to be jointly applicable to the most recent elastostatic model reduction techniques.

Dynamic path planning is a core research content for intelligent robots. This paper presents a CG-Space-based dynamic path planning and obstacle avoidance algorithm for 10 DOF wheeled mobile robot (Rover) traversing over 3D uneven terrains. CG-Space is the locus of the center of gravity location of Rover while moving on a 3D terrain. A CG-Space-based modified RRT* samples a random space tree structure. Dynamic rewiring this tree can handle the randomly moving obstacles and target in real time. Simulations demonstrate that the Rover can obtain the target location in 3D uneven dynamic environments with fixed and randomly moving obstacles.

This article deals with a human–machine cooperative system for the control of a smart wheelchair for people with motor disabilities. The choice of a traded control mode is first argued. The paper then pursues two objectives. The first is to describe the design of the cooperative system by focusing on the dialogue and the interaction between the pilot and the robot. The second objective is to introduce a new cooperative mode. In this one, three features are proposed: two semi-autonomous features, a wall following and a doorway crossing, during which the user can intervene punctually to rectify a trajectory or a path, and an assisted mode where, conversely, the machine intervenes in a manual control to avoid obstacles. This mode of intervention of an entity, human or machine, supervising a movement controlled by the other is referred as “combined control.” Examples of scenarios exploiting the cooperative capabilities of the system are presented and discussed.

The aim of this work is to design and model a novel modular bionic soft robot for crawling and crossing obstacles. The modular bionic soft robot is composed of several serial driving soft modules, each module is composed of two parallel soft actuators. By analyzing the influence of working pressure and manufacturing size on the stiffness of the modular bionic soft robot, the nonlinear variable stiffness model of the modular bionic soft robot is established. Based on this model, the spatial states and design parameters of the modular bionic soft robot are discussed when the modular bionic soft robot can pass through the obstacle. Experiments show that when the inflation air pressure of the modular bionic soft robot is 70 kPa, its speed can reach 7.89 mm/s and the height of obstacles passed by it can reach 42.8 mm. The feasibility of the proposed modular bionic soft robot and nonlinear variable stiffness model is verified by locomotion experiments.

The trajectory-planning method for a novel 4-degree-of-freedom high-speed parallel robot is studied herein. The robot’s motion mechanism adopts RR(SS)2 as branch chains and has a single moving platform structure. Compared with a double moving platform structure, the proposed parallel robot has better acceleration and deceleration performance since the mass of its moving platform is lighter. An inverse kinematics model of the mechanism is established, and the corresponding relationship between the motion parameters of the end-moving platform and the active arm with three end-motion laws is obtained, followed by the optimization of the motion laws by considering the motion laws’ duration and stability. A Lamé curve is used to transition the right-angled part of the traditional gate trajectory, and the parameters of the Lamé curve are optimized to achieve the shortest movement time and minimum acceleration peak. A method for solving Lamé curve trajectory interpolation points based on deduplication optimization is proposed, and a grasping frequency experiment is conducted on a robot prototype. Results show that the grasping frequency of the optimized Lamé curve prototype can be increased to 147 times/min, and its work efficiency is 54.7% higher than that obtained using the traditional Adept gate-shaped trajectory.

Pneumatic muscle actuator (PMA) similar to biological muscle is a new type of pneumatic actuator. The flexible manipulator based on PMAs was constructed to simulate the actual movement of the human upper arm. Considering the model errors and external disturbances, the fuzzing sliding mode control based on the saturation function was proposed. Compared with other fuzzy control methods, fuzzy control and saturation function are used to adjust the robust terms to improve the tracking accuracy and reduce the high-frequency chattering.

A behavioral-based strategy for cooperative hunting using drones is proposed in this paper. In this decentralized scheme, each drone acts as an individual agent computing its guidance strategy toward the target based on the relative position of its neighbors without the use of direct communication. The algorithm is based on the deviated pure pursuit methodology, and the emerged behavior mimics a natural hunting formation. Simulations and real-time experiments with varying conditions were carried out to validate the effectiveness of the proposed hunting scheme. Videos of the system in action can be seen on: https://youtu.be/g2dODbd6ZLA.

Efficient and high-precision identification of dynamic parameters is the basis of model-based robot control. Firstly, this paper designed the structure and control system of the developed lower extremity exoskeleton robot. The dynamics modeling of the exoskeleton robot is performed. The minimum parameter set of the identified parameters is determined. The dynamic model is linearized based on the parallel axis theory. Based on the beetle antennae search algorithm (BAS) and particle swarm optimization (PSO), the beetle swarm optimization algorithm (BSO) was designed and applied to the identification of dynamic parameters. The update rule of each particle originates from BAS, and there is an individual’s judgment on the environment space in each iteration. This method does not rely on the historical best solution in the PSO and the current global optimal solution of the individual particle, thereby reducing the number of iterations and improving the search speed and accuracy. Four groups of test functions with different characteristics were used to verify the performance of the proposed algorithm. Experimental results show that the BSO algorithm has a good balance between exploration and exploitation capabilities to promote the beetle to move to the global optimum. Besides, the test was carried out on the exoskeleton dynamics model. This method can obtain independent dynamic parameters and achieve ideal identification accuracy. The prediction result of torque based on the identification method is in good agreement with the ideal torque of the robot control.

In order to assist patients with lower limb disabilities in normal walking, a new trajectory learning scheme of limb exoskeleton robot based on dynamic movement primitives (DMP) combined with reinforcement learning (RL) was proposed. The developed exoskeleton robot has six degrees of freedom (DOFs). The hip and knee of each artificial leg can provide two electric-powered DOFs for flexion/extension. And two passive-installed DOFs of the ankle were used to achieve the motion of inversion/eversion and plantarflexion/dorsiflexion. The five-point segmented gait planning strategy is proposed to generate gait trajectories. The gait Zero Moment Point stability margin is used as a parameter to construct a stability criteria to ensure the stability of human-exoskeleton system. Based on the segmented gait trajectory planning formation strategy, the multiple-DMP sequences were proposed to model the generation trajectories. Meanwhile, in order to eliminate the effect of uncertainties in joint space, the RL was adopted to learn the trajectories. The experiment demonstrated that the proposed scheme can effectively remove interferences and uncertainties.

At present, the frontier-based exploration has been one of the mainstream methods in autonomous robot exploration. Among the frontier-based algorithms, the method of searching frontiers based on rapidly exploring random trees consumes less computing resources with higher efficiency and performs well in full-perceptual scenarios. However, in the partially perceptual cases, namely when the environmental structure is beyond the perception range of robot sensors, the robot often lingers in a restricted area, and the exploration efficiency is reduced. In this article, we propose a decision-making method for robot exploration by integrating the estimated path information gain and the frontier information. The proposed method includes the topological structure information of the environment on the path to the candidate frontier in the frontier selection process, guiding the robot to select a frontier with rich environmental information to reduce perceptual uncertainty. Experiments are carried out in different environments with the state-of-the-art RRT-exploration method as a reference. Experimental results show that with the proposed strategy, the efficiency of robot exploration has been improved obviously.

To improve mobile robot positioning accuracy in building environments and construct structural three-dimensional (3D) maps, this paper proposes a stereo visual-inertial odometry (VIO) system based on structural lines and points belonging to lines. The 2-degree-of-freedom (DoF) spatial structural lines based on the Manhattan world assumption are used to establish visual measurement constraints. The property of point belonging to a line (PPBL) is used to initialize the structural lines and establish spatial distance-residual constraints between point and line landmarks in the reconstructed 3D map. Compared with the 4-DoF spatial straight line, the 2-DoF structural line reduces the variables to be estimated and introduces the orientation information of scenes to the VIO system. The utilization of PPBL makes the proposed system fully exploit the prior geometric information of environments and then achieves better performance. Tests on public data sets and real-world experiments show that the proposed system can achieve higher positioning accuracy and construct 3D maps that better reflect the structure of scenes than existing VIO approaches.

The recent development of new offshore projects in pre-salt deepwater fields has placed offshore loading operations as the main production outflow alternative, increasing the operational complexity and risks. Numerous dangerous situations are associated with oil offloading, such as the messenger line transfer during the mooring stage. Nowadays, this critical task is realized by launching a thin messenger cable using the pneumatic line throwing apparatus. This is a complex and slow process since the operation usually occurs with the ship opposite to the wind. This work proposes a hybrid flight methodology based on computer vision and sensor fusion techniques for autonomous unmanned aerial vehicles (UAVs). The UAV takes off from an oil rig and precisely reaches a specific point in the shuttle tanker without using expensive positioning devices and augmenting UAV’s orientation (yaw) precision since the compass can suffer from severe interference due to naval metallic structures near the vehicle. The proposed framework was tested in a realistic simulated environment considering several practical operational constraints. The results demonstrated both the robustness and efficiency of the methodology.

Optimal mechanical design, model-based control, and robot dynamic calibration mainly rely on the analytical formulation of robot dynamics. In this paper, the kinematics equations of a general 3-UPU translational parallel manipulator (TPM) are derived, and then, by using the principle of the virtual work theorem, the full implicit dynamic model is derived. Furthermore, by making some modifications, the explicit dynamic formulation of the robot is attained, which is the basis of a wide range of advanced model-based controllers. To validate the proposed formulation, a prototype of the 3-UPU TPM is modeled in MSC-ADAMS® software, and the results of the dynamic formulation are validated using this model. The results show the high accuracy of the proposed dynamic formulation presented in this article.

At present, the study on autonomous unmanned ground vehicle navigation in an unstructured environment is still facing great challenges and is of great significance in scenarios where search and rescue robots, planetary exploration robots, and agricultural robots are needed. In this paper, we proposed an autonomous navigation method for unstructured environments based on terrain constraints. Efficient path search and trajectory optimization on octree map are proposed to generate trajectories, which can effectively avoid various obstacles in off-road environments, such as dynamic obstacles and negative obstacles, to reach the specified destination. We have conducted empirical experiments in both simulated and real environments, and the results show that our approach achieved superior performance in dynamic obstacle avoidance tasks and mapless navigation tasks compared to the traditional 2-dimensional or 2.5-dimensional navigation methods.

Currently, the body balance control algorithm of a quadruped robot executing trot gait motion is more complex and computationally intensive, which is not conducive to improving the real-time control performance of the robot. This paper proposes a six-dimensional spatial mechanics decoupling algorithm to enhance the balance control accuracy during trot gait while optimizing the computational effort. A 6 × 6 matrix is established to describe the relationship between six ground reaction forces of the diagonal supporting leg and six spatial forces and torques controlling robot degrees of freedom, which is optimized to reach the full rank. Decoupling calculation is adopted to obtain required ground reaction forces by matrix inverse operation, and forces are converted to joint motor torques utilizing the Jacobian matrix. The trajectory of the swing leg foot is generated based on cubic interpolation, and the robot motion speed is adjusted by selecting the landing point. This paper also proposes a region intervention control method based on center of mass projection to regulate the moving speed while ensuring the balance of the robot. Finally, the algorithm is verified by simulation using open source software Webots. The results show that when the robot moves at an average speed of 0.5 m/s, the lateral displacement change of the robot is less than 0.009 m, the height change is less than 0.003 m, and the rotating angles around the x, y, and z axes are less than 0.0036 rad, 0.0013 rad, and 0.001 rad, respectively.