In this paper, a compact unidirectional antenna consisting of a planar electric dipole and a shortened connecting element is introduced. This antenna is excited by a Γ-shaped feeding line. A wide impedance bandwidth in the frequency range of 1.3–3.3 GHz is observed in the output performance. Sufficient main lobe and low level back lobe have been introduced as other characteristics of the structure, based on radiation patterns. The antenna design process is evaluated step-by-step and using parametric study based on the antenna geometry. One of the main features of the desired antenna is the realization of circular polarization in a high percentage of the operational bandwidth 1.5–3.3 GHz. The radiation patterns of the orthogonal planes E-field and H-field along with the left-handed and right-handed circular polarization patterns for the desired antenna have been extracted and analyzed. A three-dimensional structure in the form of stacked stepped disks (SSD) is introduced to increase overall performance of antenna. There is an acceptable similarity between the E-field and H-field page patterns, which shows the accuracy of the design process. On the other hand, for studying the circular polarization, left-handed and right-handed patterns based on the main beam direction and orthogonal polarization level have acceptable performance. The maximum overall gain of the antenna in the designed frequency band is near to 13 dB.

A novel shape penta-band microstrip patch antenna is presented in this paper. The proposed antenna shows five operating frequencies and can be used for various wireless applications, i.e. 2.58 GHz for non-direct line of sight, wireless Internet service providers, and compatible with Navini Networks; 3.17 and 3.42 GHz for WiMAX; 4 GHz for C-band application such as weather radar systems; and 5.3 GHz for higher WLAN. Very small frequency ratios of the values 1.2286, 1.078, 1.169, and 1.325 are achieved between two consecutive resonant frequencies. Antenna design techniques for achieving five bands are presented and discussed step by step. The analysis is done by Ansoft HFSS v.15, and results are verified with experimental results of fabricated prototypes.

Here we demonstrate wireless energy transfer that exploits the conductivity and permittivity of soil to create a potential gradient on the surface around an earthed electrode, distributing electrical energy over the area. This generated surface potential can be amplified using a special standing-wave receiver for harnessing the distributed energy. We have experimentally mapped the surface potential around the electrode and plotted the received energy covering an area of 1200 m2. Key operating parameters are determined with a discussion on optimizing the system efficiency. This technique could address the challenge of distributing electrical energy to many low power devices over large outdoor areas without the use of wires.

A SPICE model of an antenna for transmitting is proposed. This model allows for the calculation of the frequency-domain radiation fields for a range of frequencies in which the model is valid, it also allows for the direct calculation of the time-domain (TD) radiation fields for an arbitrary TD excitation signal, the spectrum of which should be within the modeling range. The model is then verified by two examples, both of them demonstrate its validity. This model can be a part of a complete system-level model for electromagnetic compatibility simulation.

The attractive feature of the singularity method for steady Stokes flows is that the hydrodynamic forces acting on the particle can be calculated by the total strength of distributed singularities. For unsteady Stokes flows, however we have to derive hydrodynamic forces acting on a solid body in terms of the strengths of both unsteady Stokeslets as well as unsteady potential dipoles if mass and force sources are both taken into consideration. Since the hydrodynamic force formulation results in a Volterra integral equation of the first kind, and the strengths are numerically approximated by means of the Lubich convolution quadrature method (CQM) in this study. As far as the numerical solutions of time-domain integral formulations of the unsteady Stokes equations are concerned, this paper requires only the Laplace-domain instead of the time- domain fundamental solutions of the governing equations. The stability and accuracy of the proposed method are verified through some well selected numerical examples. In total we include two examples presenting the accuracy of Lubich CQM, and another two examples for calculating general hydrody-namic forces of a sphere in oscillating or non-oscillating unsteady Stokes flows. It is concluded that this study is able to extend the unsteady Stokes flow theory to more general transient motions instead to limit to the oscillating flow assumption.

An alternative approach is based on statistically computed signal analysis technique for the design of antenna array exhibiting lower side lobes in their radiation pattern. New and generalized expressions for the array factor of all physically realizable linear antenna arrays are introduced. An algorithm based on the statistically computed signal analysis is designed. By considering the random elements, distance between the sensors, their mean, variance, average amplitude pattern and correlation of the amplitude between the two angles, some mathematical formulations have been done and shown with the help of MATLAB. Based on these generalized expressions, a new way of synthesizing arrays with reduced side lobes is available. It applies to end fire antenna array, which may have either even or odd numbers of sensors with restricted elements spacing. Final expressions shown are a clear relationship between elements excitation and null location in the radiation patterns.