The authors seek to design a lower limb exoskeleton to augment human finned swimming; however, data associated with human finned swimming previously did not exist, particularly data that characterizes the active joint torque requirements for human-scale finned swimming motion and the corresponding thrust generation. Since these data are not directly measurable nor easily computed in human subject experiments, the authors instead employed a human-scale robotic platform to characterize the relationship between joint torque, speed, power, and thrust production during flutter kick swimming, specifically at the hip joints. Among the useful insights from this study: (1) the underwater environment can be accurately modeled as a simple viscous load as seen by the hip joints, where viscous coefficient depends on the type of fin; (2) accordingly, for a given fin, movement at any amplitude and frequency is invariant when motion is normalized by amplitude; velocity and torque by the product of amplitude and frequency; and power and thrust by the square of the product of amplitude and frequency; (3) the power-specific thrust is invariant, regardless of fin type, amplitude of motion, and frequency of motion; and 4) the phasing between right and left legs does not have a significant effect on thrust generation (i.e., kicking in-phase and kicking in opposition behave similarly). The authors hope this data will be useful to other researchers interested in developing lower limb exoskeletons to augment underwater human finned swimming.

Prostate cancer is the second most common malignancy in American men. High-dose-rate brachytherapy is a popular treatment technique in which a large, localized radiation dose is used to kill cancer. Utilization of curvilinear catheter implantation inside the prostate gland to provide access channels to host the radiation source has shown superiority in terms of improved dosimetric constraints compared to straight needles. To this aim, we have introduced an active needle to curve inside the prostate conformal to the patient’s specific anatomical relationship for improved dose distribution to the prostate and reduced toxicity to the organs at risk. This work presents closed-loop control of our tendon-driven active needle in water medium and air using the position feedback of the tip obtained in real time from an ultrasound (US) or an electromagnetic (EM) tracking sensor, respectively. The active needle consists of a compliant flexure section to realize bending in two directions via actuation of two internal tendons. Tracking errors using US and EM trackers are estimated and compared. Results show that the bending angle of the active needle could be controlled using position feedback of the US or the EM tracking system with a bending angle error of less than 1.00 degree when delay is disregarded. It is concluded that the actuation system and controller, presented in this work, are able to realize a desired bending angle at the active needle tip with reasonable accuracy paving the path for tip tracking and manipulation control evaluations in a prostate brachytherapy.

Although several studies have revealed that fractional order controllers usually outperform conventional integer-order control solutions, fractional order controllers are not yet widely applied in industrial applications due to their complex mathematical background. In this paper, further improvements of a simple weighted sum feedback design are introduced that imitates the behavior of a fractional order controller but is free from its various formal restrictions. The proposed control solution has the main characteristics of a fractional order controller, such as finite memory length, excellent transient response with no overshoot and robust behavior, but it is placed into a much simpler mathematical framework. In the current paper, a simple derivative term was incorporated in the design which made the controller’s output more stable by completely eliminating output chattering. The proposed control method was developed for a general second-order system. It was tested in a fixed point iteration-based adaptive control scenario, through simulations using a robotic example and on experimental basis as well, utilizing a simple one-degree-of-freedom electromechanical system. The presented experiments are the first systematic investigations of the fixed point iteration-based adaptive control method.

As a solution to soft material manipulation, dual-arm robots that are capable of multi-point grasping have become the latest trend due to their higher capability and efficiency. To explore further development in soft material manipulation and go beyond the hardware limit of dual arms, in this paper the robot platform “Quad-SCARA” that consists of four Selective Compliance Assembly Robot Arm (SCARA) is developed and introduced. With the base of hardware platform, a novel collision avoidance system designed for the motion planning of Quad-SCARA in multi-point grasping state is proposed. This system is inspired by the idea of “Buffered Voronoi Cell (BVC),” an algorithm originally proposed for multi-agent collision avoidance. After appropriate adaptation and new proposition in implementation of BVC, the experiments of folding and spreading a handkerchief are performed, and the results in simulation and robot experiments are presented and discussed for the validation and evaluation of entire system.

To support and facilitate the rehabilitation of patients with physical limitations and aid the therapist, several robotic structures are being studied. Among the structures, the cable-driven robots stand out. The cable-driven robots are structures actuated by cables and have the advantages of being flexible and reconfigurable for each patient. The objective of this paper is to develop a theoretical model for knee flexion/extension force and moment using a cable-driven robot. The proposed model is necessary for elaborating a referential to which diagnosis can be made and the improvement of the patient evaluated. The presented theoretical model was validated through experiments with twelve sedentary and healthy volunteers. The first procedure tested ten subjects in three thigh angles for knee flexion motion; the second procedure tested two subjects in flexion and extension for the same thigh angle. The results show the validity of the model for 88.58% of the tests in an ANOVA analysis with a 99% confidence interval. The similarity of data for different gender, ages, and intrinsic factors was noted, implying that the model is representative and independent of the subject’s individuality. Differences between flexion and extension values were observed, which need to be studied in the future.

This paper presents the design and simulation of a Parallel Kinematic (PK) testbed for head impacts. The proposed design is presented as a novel head impact testbed using a parallel platform as main motion simulation mechanism. The testbed is used to give a motion to a head mannequin to impact against a steel plate. In addition, the platform in the testbed allows to modify the orientation of the head mannequin model to evaluate different types of impacts. The testbed has been modeled with software MS ADAMS® to evaluate its performance with a dynamic simulation and to characterize the testbed design during top and lateral impact events. Results show that PK testbed gives a significant force and acceleration to the head mannequin at the moment of the impact.

To overcome the physical limitations of mechanical bone cutting in minimally invasive surgery, we are developing a miniature parallel robot that enables positioning of a pulsed laser with an accuracy below 0.25 mm and minimizes the required manipulation space above the target tissue. This paper presents the design, control, device characteristics, functional testing, and performance evaluation of the robot. The performance of the robot was evaluated within the scope of a path-following experiment. The required accuracy for continuous cuts was achieved and reached 0.176 mm on the test bench.

Nonlinear articular geometries of biological joints have contributed to highly agile and adaptable human-body motions. However, human–machine interaction could potentially distort natural human motions if the artificial mechanisms overload the articular surfaces and constrain biological joint kinematics. It is desired to better understand the deformable articular geometries of biological joints in vivo during movements for design and control of wearable robotics. An articular geometry reconstruction method is proposed to measure the effective articular profile with a wearable compliant device and illustrated with its application to knee-joint kinematic analysis. Regarding the joint articulation as boundary constraints for the compliant mechanism, the equivalent articular geometry is constructed from the beam deformations driven by knee motions, where the continuous deformations are estimated with strain data from the embedded sensors. Both simulated analysis and experimental validation are presented to justify the proposed method.

This paper deals with the robust force and position control problems of series elastic actuators (SEAs). It is shown that an SEA’s force control problem can be described by a second-order dynamic model which suffers from only matched disturbances. However, the position control dynamics of an SEA is of fourth order and includes matched and mismatched disturbances. In other words, an SEA’s position control is more complicated than its force control, particularly when disturbances are considered. A novel robust motion controller is proposed for SEAs by using disturbance observer (DOb) and sliding mode control. When the proposed robust motion controller is implemented, an SEA can precisely track desired trajectories and safely contact with an unknown and dynamic environment. The proposed motion controller does not require precise dynamic models of environments and SEAs. Therefore, it can be applied to many different advanced robotic systems such as compliant humanoids, industrial robots and exoskeletons. The validity of the proposed motion controller is experimentally verified.

Using wearable robots is an effective means of rehabilitation for stroke survivors, and effective recognition of human motion intentions is a key premise in controlling wearable robots. In this paper, we propose an inertial measurement unit (IMU)-based gait phase detection system. The system consists of two IMUs that are tied on the thigh and on the shank, respectively, for collecting acceleration and angular velocity. Features were extracted using a sliding window of 150 ms in length, which was then fed into a quadratic discriminant analysis (QDA) classifier for classification. We recruited five stroke survivors to test our system. They walked at their own preferred speed on the level ground. Experimental results show that our proposed system has the ability of recognizing the gait phase of stroke survivors. All recognition accuracy results are above 96.5%, and detections are about 5–15 ms in advance of time. In addition, using only one IMU can also give reliable recognition results. This paper proposes an idea about the further research on human–computer interaction for the control of wearable robots.

For a real-time robotic prosthetic control, gait event detection plays an important role. In this paper, one novel sensor was proposed to realize gait event detection. The sensor includes one strain gauge bridge, which can reflect the entire deformation of carbon-fiber footplate on a robotic prosthesis. Three unilateral transtibial amputees participated in the experiments. Experimental results show that using the proposed sensor method, gait event detection (stance phase and swing phase) accuracy is approximately 100%. Based on the detected gait events, three locomotion modes (sit, stand, and walk) and the corresponding transition modes could be determined. Difference between different gait event detection systems was further conducted.

In this work we present NEUROExos, a novel generation of upper-limb exoskeletons developed in recent years at The BioRobotics Institute of Scuola Superiore Sant’Anna (Italy). Specifically, we present our attempts to progressively (i) improve the ergonomics and safety (ii) reduce the encumbrance and weight, and (iii) develop more intuitive human–robot cognitive interfaces. Our latest prototype, described here for the first time, extends the field of application to assistance in activities of daily living, thanks to its compact and portable design. The experimental studies carried out on these devices are summarized, and a perspective on future developments is presented.

A generally accepted helicopter model used for control includes the effect of Small Body Forces (SBF) which couple the vehicle's rotational subsystem inputs to its translational dynamics. SBF result from tail rotor thrust and lateral forces due to main rotor flapping. It is well-known that SBF lead to a theoretically challenging stabilization problem for the tracking error dynamics. Hence, much of the existing work has neglected SBF in order to simplify control design. We design a controller that directly compensates the influence of the tail rotor component of the SBF. The design is validated in simulation and flight tests.

A comparison of series, parallel, and dual Passive Assist Devices(PADs) designed using energy minimization based on a known maneuver is presented. Implementation of a PAD can result in an improvement in system performance with respect to efficiency, reliability, and/or utility. We introduce a new initial design using a weighted force displacement curve fit. A robust design approach for a family of maneuvers is developed and presented. Applications to a 3-link manipulator arm show that PADs could reduce energy consumption between 60% and 80%.

This paper treats the systematic injury analysis of lower arm robot–human impacts. For this purpose, a passive mechanical lower arm (PMLA) was developed that mimics the human impact response and is suitable for systematic impact testing and prediction of mild contusions and lacerations. A mathematical model of the passive human lower arm is adopted to the control of the PMLA. Its biofidelity is verified by a number of comparative impact experiments with the PMLA and a human volunteer. The respective dynamic impact responses show very good consistency and support the fact that the developed device may serve as a human substitute in safety analysis for the described conditions. The collision tests were performed with two different robots: the DLR Lightweight Robot III (LWR-III) and the EPSON PS3L industrial robot. The data acquired in the PMLA impact experiments were used to encapsulate the results in a robot independent safety curve, taking into account robot's reflected inertia, velocity and impact geometry. Safety curves define the velocity boundaries on robot motions based on the instantaneous manipulator dynamics and possible human injury due to unforeseen impacts.

In this study, a model for wheeled mobile robots that includes a static friction model in the force balance at the robot's center of mass is presented. Additionally, a least-squares method to linearly combine functions is proposed to estimate the friction coefficients. The experimental and simulation results are discussed to demonstrate the effectiveness of this approach in indoor environments for two floor types.

This paper presents a solution to the problem of generating constrained robust trajectory planning for nonlinear mechatronic systems. By using an indirect variational solution method, the necessary optimality conditions deriving from the Pontryagin's minimum principle are imposed, and lead to a differential Two-Point Boundary Value Problem (TPBVP); numerical solution of the latter is accomplished by means of collocation techniques. The robustness to parametric mismatches is obtained trough the use of sensitivity functions, while a hard constraint on actuator effort is obtained using a smoothing technique. Numerical results shows that the robustness can be greatly improved, and that the inclusion of constraints on actuator effort does not affect it.

Human–robot interaction is an emerging area of research where a robot may need to be working in human-populated environments. Human trajectories are generally not random and can belong to gross patterns. Knowledge about these patterns can be learned through observation. In this paper, we address the problem of a robot's social awareness by learning human motion patterns and integrating them in path planning. The gross motion patterns are learned using a novel Sampled Hidden Markov Model, which allows the integration of partial observations in dynamic model building. This model is used in the modified A* path planning algorithm to achieve socially aware trajectories. Novelty of the proposed method is that it can be used on a mobile robot for simultaneous online learning and path planning. The experiments carried out in an office environment show that the paths can be planned seamlessly, avoiding personal spaces of occupants.

This paper describes the design and experimental validation of an omnidirectional unmanned ground vehicle built for operation on real-world, unstructured terrains. The omnidirectional capabilities of this robot give it advantages over skid-steered or Ackermann-steered vehicles in tight and confined spaces. The robot's conventional wheels allow for operation in natural, outdoor environments as compared to omnidirectional robots that use specialized wheels with small, slender rollers and parts that can easily become obstructed with debris and dirt. Additionally, the robot's active split offset caster design allows the robot to kinematically follow continuous but non-differentiable paths and heading angles regardless of its current kinematic configuration. The active split offset caster design also results in less scrubbing torque and therefore less energy consumption during steering as compared to actively steered caster designs. The focus of this paper is the robot's mechanical design as it relates to kinematic isotropy and experimental validation of the design.