Lower limb exoskeletons (LLEs) have demonstrated their potential in delivering quantified repetitive gait training for individuals afflicted with gait impairments. A critical concern in robotic gait training pertains to fostering active patient engagement, and a viable solution entails harnessing the patient’s intrinsic effort to govern the control of LLEs. To address these challenges, this study presents an innovative online gait learning approach with an appropriate control strategy for rehabilitation exoskeletons based on dynamic movement primitives (DMP) and an Assist-As-Needed (AAN) control strategy, denoted as DMP-AAN. Specifically tailored for post-stroke patients, this approach aims to acquire the gait trajectory from the unaffected leg and subsequently generate the reference gait trajectory for the affected leg, leveraging the acquired model and the patient’s personal exertion. Compared to conventional AAN methodologies, the proposed DMP-AAN approach exhibits adaptability to diverse scenarios encompassing varying gait patterns. Experimental validation has been performed using the lower limb rehabilitation exoskeleton HemiGo. The findings highlight the ability to generate suitable control efforts for LLEs with reduced human-robot interactive force, thereby enabling highly patient-controlled gait training sessions to be achieved.

We proposed a compliant leg configuration that enhances the conventional pantograph design with leaf springs. The following facts characterize the proposed configuration: (1) Due to the use of the pantograph structure, the mass is centralized around the hip joint, reducing the lower leg inertia; (2) Leaf springs are chosen as elastic parts to increase energy efficiency and estimate foot-end contact forces. Compared with coil springs, leaf springs require no guide rails to deploy, and their stiffness can be easily adjusted through shape cutting. Analytical models are introduced to analyze the leg’s stiffness and estimate the contact forces only with the deflections of leaf springs. A one-leg robot based on the proposed design is built, and various experiments are conducted. Experiments regarding the stiffness calibration and the contact forces estimation showed an acceptable agreement with the analytical model. Experiments of dropping demonstrate the feasibility of the leg to perform spring-like behaviors. Experiments of periodic hopping demonstrate the feasibility of using spring deflections to detect touch-down events. For energy efficiency, it is also observed that the elastic leg has a 20% increment concerning the jumping height in the flight phase, compared with the one where leaf springs are replaced with rigid materials.

As space missions are needed in the future, the assembly volume of the space truss will become larger and larger, and the advancing path of the on-orbit cellular robot to the mission target will become more and more complicated. If the shortest moving path cannot be found in the truss environment, the climbing time of the robot on the truss will be greatly increased. To improve the speed of the cellular robot moving to the target point on the large space truss, this paper designs a cellular robot structure and configuration suitable for climbing on the truss and uses the improved sparrow algorithm to solve the problem of robot motion path planning. By establishing a mathematical model of the space truss, the improved sparrow algorithm is used to find the shortest path between the starting point and the end point in the truss environment. Finally, the data of this algorithm are compared with the data of other algorithms. The data results show that the improved sparrow algorithm is very effective in solving the optimal path of the space truss. The improved sparrow algorithm keeps the same optimal path compared with the standard sparrow algorithm, and the overall reaction time is increased by 51.60%, and the number of effective iterations is increased by about 13.87%.

Human gait trajectory prediction is a long-standing research topic in human–machine interaction. However, there are two shortcomings in the current gait trajectory prediction technology. The first shortcoming is that the neural network model of gait prediction only predicts dozens of future time frames of gait trajectory. The second shortcoming is that the gait prediction neural network model is uninterpretable. We propose the Interpretable-Concatenation former (IC-former) model, which can predict long-term gait trajectories and explain the prediction results by quantifying the importance of data at different positions in the input sequence. Experiments prove that the IC-former model we proposed not only makes a breakthrough in prediction accuracy but also successfully explains the data basis of the prediction.

An online pattern recognition method of lower limb movements is proposed based on the personalized surface electromyography (sEMG) signals, and the corresponding experimental researches are performed in the rehabilitation training. Further, a wireless wearable acquisition instrument is used. Based on this instrument, a host computer for the personal online recognition and real-time control of rehabilitation training is developed. Three time-domain features and two features in the nonlinear dynamics are selected as the joint set of the characteristic values for the sEMG signals. Then a particle swarm optimization (PSO) algorithm is used to optimize the feature channels, and a k-nearest neighbor (KNN) algorithm and the extreme learning machine (ELM) algorithm are combined to classify and recognize individual sample data. Based on the multi-pose lower limb rehabilitation robot, the real-time motion recognition and the corresponding rehabilitation training are carried out by using the online personalized classifier. The experimental results of eight subjects indicate that it takes only 6 min to build an online personalized classifier for the four types of the lower limb movements. The recognition between switches of different rehabilitation training movements is timely and accurate, with an average recognition accuracy of more than 95%. These results demonstrate that this system has a strong practicability.

The language-guided visual robotic grasping task focuses on enabling robots to grasp objects based on human language instructions. However, real-world human-robot collaboration tasks often involve situations with ambiguous language instructions and complex scenarios. These challenges arise in the understanding of linguistic queries, discrimination of key concepts in visual and language information, and generation of executable grasping configurations for the robot’s end-effector. To overcome these challenges, we propose a novel multi-modal transformer-based framework in this study, which assists robots in localizing spatial interactions of objects using text queries and visual sensing. This framework facilitates object grasping in accordance with human instructions. Our developed framework consists of two main components. First, a visual-linguistic transformer encoder is employed to model multi-modal interactions for objects referred to in the text. Second, the framework performs joint spatial localization and grasping. Extensive ablation studies have been conducted on multiple datasets to evaluate the advantages of each component in our model. Additionally, physical experiments have been performed with natural language-driven human-robot interactions on a physical robot to validate the practicality of our approach.

In this study, we present a novel approach to generate limit cycle walking using nonlinear model predictive control (NMPC). Output-zeroing control is now widely used as a control method to limit cycle walking. This control offers strong feedback to the desired trajectory and the generation of energy-efficient and robust limit cycle walking. However, we observed that this method disables the natural dynamics of the robot, leading to problems regarding energy efficiency during walking. This study demonstrates that the energy consumption of walking using the output-zeroing control increases significantly in a disturbed environment. To overcome this limitation, the proposed approach leverages the robot’s dynamics using NMPC to achieve energy-efficient walking even in a disturbed environment. We demonstrate the practicality of the proposed method using two different simulation environments.

Most studies on path planning of robotic arm focus on obstacle avoidance at the end position of robotic arm, while ignoring the obstacle avoidance of robotic arm joint linkage, and the obstacle avoidance method has low flexibility and adaptability. This paper proposes a path obstacle avoidance algorithm for the overall 6-DOF robotic arm that is based on the improved A* algorithm and the artificial potential field method. In the first place, an improved A* algorithm is proposed to address the deficiencies of the conventional A* algorithm, such as a large number of search nodes and low computational efficiency, in robotic arm end path planning. The enhanced A* algorithm proposes a new node search strategy and local path optimization method, which significantly reduces the number of search nodes and enhances search efficiency. To achieve the manipulator joint rod avoiding obstacles, a method of robotic arm posture adjustment based on the artificial potential field method is proposed. The efficiency and environmental adaptability of the robotic arm path planning algorithm proposed in this paper are validated through three types of simulation analysis conducted in different environments. Finally, the AUBO-i10 robotic arm is used to conduct path avoidance tests. Experimental results demonstrate that the proposed method can make the manipulator move smoothly and effectively plan an obstacle-free path, proving the method’s viability.

Although several studies have revealed that fractional order controllers usually outperform conventional integer-order control solutions, fractional order controllers are not yet widely applied in industrial applications due to their complex mathematical background. In this paper, further improvements of a simple weighted sum feedback design are introduced that imitates the behavior of a fractional order controller but is free from its various formal restrictions. The proposed control solution has the main characteristics of a fractional order controller, such as finite memory length, excellent transient response with no overshoot and robust behavior, but it is placed into a much simpler mathematical framework. In the current paper, a simple derivative term was incorporated in the design which made the controller’s output more stable by completely eliminating output chattering. The proposed control method was developed for a general second-order system. It was tested in a fixed point iteration-based adaptive control scenario, through simulations using a robotic example and on experimental basis as well, utilizing a simple one-degree-of-freedom electromechanical system. The presented experiments are the first systematic investigations of the fixed point iteration-based adaptive control method.

Compliant interaction between robots and the environment is crucial for completing contact-rich tasks. However, obtaining and implementing optimal interaction behavior in complex unknown environments remains a challenge. This article develops a hybrid impedance and admittance control (HIAC) scheme for robots subjected to the second-order unknown environment. To obtain the second-order target impedance model that represents the optimal interaction behavior without the accurate environment dynamics and acceleration feedback, an impedance adaptation method with virtual inertia is proposed. Since impedance control and admittance control have complementary structures and result in unsatisfactory performance in a wide range of environmental stiffness due to their fixed causality, a hybrid system framework suitable for the second-order environment is proposed to generate a series of intermediate controllers which interpolate between the responses of impedance and admittance controls by using a switching controller and adjusting its switching duty cycle. In addition, the optimal intermediate controller is selected using a mapping of the optimal duty cycle to provide the optimal implementation performance for the target impedance model. The proposed HIAC scheme can achieve the desired interaction and impedance implementation performance while ensuring system stability. Simulation and experimental studies are performed to verify the effectiveness of our scheme with a 2-DOF manipulator and a 7-DOF Franka EMIKA panda robot, respectively.

With the popularization of electric vehicles, early built parking lots cannot solve the charging problem of a large number of electric vehicles. Mobile charging robots have autonomous navigation and complete charging functions, which make up for this deficiency. However, there are static obstacles in the parking lot that are random and constantly changing their position, which requires a stable and fast iterative path planning method. The gray wolf optimization (GWO) algorithm is one of the optimization algorithms, which has the advantages of fast iteration speed and stability, but it has the drawback of easily falling into local optimization problems. This article first addresses this issue by improving the fitness function and position update of the GWO algorithm and then optimizing the convergence factor. Subsequently, the fitness function of the improved gray wolf optimization (IGWO) algorithm was further improved based on the minimum cost equation of the A* algorithm. The key coefficients AC1 and AC2 of two different fitness functions, Fitness1 and Fitness2, were discussed. The improved gray wolf optimization algorithm integrating A* algorithm (A*-IGWO) has improved the number of iterations and path length compared to the GWO algorithm in parking lots path planning problems.

Challenges/shortages of existing research: Both a topology graph TG and a contracted graph CG are the important tool for the type synthesis of mechanisms and have been studied. Let (b, t, q, p, h) be (binary, ternary, quaternary, pentagonal, hexagonal) link, respectively. Existing TG may include (b, t, q, p, h, …), and existing CG may include (t, q, p, h, …) and exclude b. Therefore, their derivation and isomorphism identification are quite complicated.

The significance of this research: A novel high-contracted topology graph Gj/i including n (q, p, h, …) is proposed in this paper. Since Gj/i excludes (b, t), Gj/i must be more simple than complex TG and CG, and the derivation and isomorphism identification of various Gj/i must be more easily than that of the complex TG and CG.

This paper focuses on the derivation and isomorphism identification of various Gj/i for deriving TG and type synthesis of the complex closed robotic mechanisms with more mechanical advantages and useful functions. First, the conceptions for deriving Gj/i and the relations between Gj/i and the basic links are explained, the relative rules are determined for representing Gj/i and reducing isomorphism of Gj/i using the character strings and the digit groups, and many different Gj/i are represented based on determined rules. Second, many different Gj/i (j = 0, …, 17) are constructed using a circle, several composite curves, and vertex points on the circle based on the character strings and the digit groups. Third, a condition for identifying isomorphism Gj/i is discovered and proved using the composite curves and their connections in Gj/i. Some isomorphism Gj/i are identified from constructed different Gj/i. Finally, different Gj/i (G7/7, G11/11) are illustrated to derive TGs, several complex closed robotic mechanisms are synthesized using derived TGs for creating robotic gripper, a long-stroke robotic pumping unit, and a tunnel robotic excavator.

This paper proposes a new type of hybrid manipulator that can be of extensive use in industries where translational motion is required while maintaining an arbitrary end-effector orientation. It consists of two serially connected parallel mechanisms, each having three degrees of freedom, of which the upper platform performs a pure translational motion with respect to the mid-platform. Closed-form forward and inverse kinematic analysis of the proposed manipulator has been carried out. It is followed by the determination of all of its singular configurations. The theoretical results have been verified numerically, and the 3D modeling and simulation of the manipulator have also been performed. A simple optimal design is presented based on optimizing the kinematic manipulability, which further demonstrates the potential of the proposed hybrid manipulator.

Over decades of robotics research, cooperative object transportation has been studied as a meaningful model problem for robotic networks because it possesses a variety of crucial challenges. Although these challenges are demanding, the cooperation of multiple robots has the potential to solve automation problems that are beyond the scope of an individual robot. So far, the model problem has mostly been addressed by explicitly controlling the robots’ positions. However, the position-based approach suffers from some intrinsic detriments, for example, the lack of explicit feedback between robots and object. Moreover, it remains an open question how many robots shall be employed to ensure a successful transportation. This paper’s purpose is to overcome these challenges using a novel force-based approach taking into account the robots’ actual manipulation capabilities, that is, the exerted forces. Using cost-efficient hardware, the interaction forces are measured and, what is more, explicitly controlled by a highly responsive onboard controller. Employing a tailored software architecture, the novel force-based scheme, useful for robotic manipulation beyond the benchmark problem, is probably the most flexible of its kind regarding the number of robots and the object’s shape. The controller’s functionality and performance as well as the scheme’s versatility are demonstrated by several hardware experiments.