This paper presents a pattern diversity UWB antenna for Wireless Body Area Network (WBAN) communications. Pattern diversity antenna comprises two antenna elements with directional and omnidirectional patterns suitable for off-body and on-body communications respectively. Several broad-banding techniques such as Co-Planar waveguide, parasitic patches, and cavity resonant techniques are incorporated in microstrip antenna to achieve an ultra-wideband of 7.5 GHz (3.1 to 10.6 GHz) with a directional pattern. Monopole radiator topology is utilized to achieve a UWB frequency range of 2.6–10.6 GHz with an omnidirectional pattern. Pattern diversity is achieved using an orthogonal arrangement of the antenna elements in a compact size of 40 mm × 34 mm, maintaining the isolation >20 dB between the antennas. Gain varies from 2.2 to 4.6 dBi and 2.5 to 7.5 dBi for omnidirectional and directional antenna respectively. The simulated radiation efficiency for the directional antenna and the omnidirectional antenna are 74–86% and 52–66.5% respectively. The proposed design provides a good diversity performance in the entire UWB bandwidth with ECC<0.1 and a diversity gain of approximately 10 dB. SAR impact evaluated under various conditions is found to be <1.6 W/Kg for 1 gram of tissue.

Fifth-generation technology is not fully deployed in the world wireless communication till date. Millimeter-wave (mm-wave) band needs to be used due to plenty of available bandwidth and for achieving the goals of 5G such as greater data rate, ultra-high-speed video broadcasting, low latency services, and many more. Wideband antenna is required for 5G applications to access the high speed, low latency Internet services, and ultra-high-definition video streaming. Various bandwidth enhancement techniques have been reported by the researchers for microstrip antennas operating at microwave bands. High link losses, small wavelength, limited coverage, and environmental losses are the major challenges of mm-wave band. To mitigate these issues and satisfy 5G standard, an antenna with wide bandwidth, high gain, narrow steerable beam, high isolation, low side lobe levels, and multiband characteristics is required. Modifications in conventional antenna design techniques are required to achieve broader bandwidth along with stable radiation characteristics, improved gain, and low side lobe levels at mm-wave frequencies. This paper presents the survey of various bandwidth enhancement techniques which has been used in the 5G antennas designed by researchers. Reviews of some wideband 5G antennas with their performance comparisons are also discussed.

The radiation characteristics of the microstrip antenna (MSA) on the frequency selective surface (FSS) based absorbing layer is presented in this paper. It is observed that an absorbing layer placed between the MSA configuration and the ground plane helps in controlling the radiation characteristics of the antenna. It not only reduces the back lobe but also reduces the beamwidth and gain of the antenna simultaneously. This is because the absorbing layer absorbs some amount of power radiated by the antenna in both forward and backward directions. The proposed design is simulated using Ansys HFSS electromagnetic simulation software and the results are validated by comparing it with the results obtained from the equivalent circuit approach as well as experimental results. The effect of absorber on radiation characteristics of the radiator demonstrates its potential use in suppressing the radiation from the printed circuit board traces.

In this paper, a high gain wideband circularly polarized (CP) microstrip antenna is presented for broadband operation. The proposed structure comprised of a partially grounded printed monopole antenna loaded with a split ring resonator and a metallic reflector. By using the metallic reflector surface underneath the patch radiator results in the reflected waves in the same phase with main lobe radiation, thereby improving the gain and it also acts like a secondary radiator to generate wideband CP behavior in the proposed design. A gain enhancement of 4.3 dBi is achieved in the operating frequency band as compared with the design without a metallic reflector. The maximum gain achieved in the presented method is 8.6 dBic over the entire operating range. The proposed design shows a wideband behavior ranging from 4.30 to 9.10 GHz with the 10-dB impedance bandwidth of 71.64%. In addition, the proposed design yielded a broadside right hand CP radiation with a 3-dB axial ratio bandwidth of 33.88% from 4.98 to 7.01 GHz. The proposed antenna is fabricated and experimental results on reflection coefficient, gain, axial ratio, and radiation patterns concede well with simulation results.

In this paper, a novel compact dual-band microstrip patch antenna with dual-radiation modes is investigated. The proposed antenna consists of a rectangular ground plane, a U-shaped feed probe, and an H-shaped slot radiating patch. By adjusting the size of these structures, a dual-band antenna can be obtained. In the low-frequency band, the antenna can radiate one radiation beam with high gain. In the high-frequency band, the antenna can achieve monopole-like radiation pattern. Therefore, an antenna prototype is fabricated and measured for validation. Good agreement between the simulated and measured results is observed in this paper. The antenna's operating frequency ranges are 3.6–3.85 GHz in the low-frequency band and 5.1–6.1 GHz in the high-frequency band with the reflection coefficient less than −10 dB. At 3.7 GHz, the antenna radiate one beam with 8.8 dBi realized gain. At 5.5 GHz, it exhibits dual-radiation beams directed to −48 and 48° with 5.6 and 5.5 dBi realized gain in the xoz-plane and −48 and 48° with 2.9 and 3.0 dBi realized gain in the yoz-plane. Therefore, the proposed antenna is a good candidate for wireless communication systems.

A super-wideband microstrip fractal antenna is designed with miniaturized dimensions of 21 mm × 23.5 mm × 1 mm and generation of dual rejection bands for WLAN/WiMAX systems has been achieved. The triangular fractal shape slots are placed inside a circular patch and the antenna is miniaturized by using a repetition frequency resonance technique. The proposed antenna frequency range 2.6–40 GHz operates for VSWR of less than 2. Two band rejections for the frequency ranges 5.1–5.8 GHz and 3.4–3.7 GHz are created by one enhanced slot at the feed line and one split-ring resonator at the back of antenna. HFSS 3D software was used for computer simulation. The proposed antenna is fabricated on the FR4 substrate with 1 mm thickness. The measurement data show good agreement with the simulation results.

This paper proposes a new radar cross section (RCS) reduced microstrip antenna incorporating 475 square slots on the patch. The proposed antenna achieves wideband RCS reduction with radiation performance sustained. The modified and reference antenna are simulated and analyzed in radiating and scattering mode, respectively. Prototypes of two antennas are fabricated and measured. Compared with the reference antenna, the simulated result shows the modified antenna RCS reduced in the frequency range 1.1–2.6 GHz, which contains the in-band and out-of-band frequency band simultaneously. And the maximum RCS reduction is 7.6dB at the frequency of 1.19GHz. Besides, the modified antenna can achieve the antenna RCS reduction in the case of oblique incidence. The prototypes of two antennas are fabricated and measured, and the accuracy of the simulation is proved by the measured result. Due to its advantages of simplicity, wideband RCS reduced, broad-angle RCS reduced, the method in this paper is suitable for wideband antenna RCS reduction in space-limited environment.

In this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

This paper proposes a microstrip antenna with reduced in-band and out-of-band radar cross-section (RCS) by subtracting the area of weak scattered current on the ground plane. Fourteen square slots were subtracted from the ground plane, reducing in-band and out-of-band RCS while maintaining radiation performance. Modified and reference antenna surface current distributions were simulated and analyzed in radiating and scattering modes. Two antenna prototypes were fabricated and measured to verify the simulation. The proposed antenna RCS was reduced compared with the reference antenna in the frequency range 1–4.4 GHz, including in-band and out-of-band frequency bands. Maximum in-band and out-of-band RCS reduction was 16.3 dBsm at the working frequency, and 19.3 dBsm at 3.4 GHz, respectively

In this paper, the design of a new compact uniplanar coplanar waveguide-fed antenna for multiband wireless application is presented and investigated. This antenna has a compact size of 25 × 25 mm2 and consists of a three parallel stub optimized added on rectangular slot to the radiator patch and T-shaped which inverted in the ground plane. The final prototype antenna designing resonantes at frequency bands (2.4–2.9 GHz), (3.7–5.2 GHz), and (5.7–6 GHz) with a return loss less than −10 dB. Details of the antenna configuration, design, simulation, and experimental results are presented, investigated, and discussed. The compactness, simple feeding technique, and conception of the uniplanar design make it easy to be integrated within devices of multiples wireless applications.

A compact three-dimensional (3D) circularly polarized (CP) microstrip antenna is presented in this paper. The antenna adopts three low-cost printed circuit boards to form an integrated and closed 3D structure, and the radiation patch and the feed patches are etched on the surface of that. A crossed slot is cut on the radiation patch to miniaturize the antenna, and triangular feed patches are introduced to increase the bandwidths. In addition, because of the utilization of a low-loss series feed line, the antenna has a high efficiency of more than 95%. A prototype of the antenna is measured to validate the method. The dimensions of the antenna is 0.064λ × 0.36λ (λ is the wavelength in free space at 1.2 GHz). The results indicate that the impedance bandwidth for voltage standing wave ratio ≤ 2 reaches 23%, and the bandwidth for axial ratio (AR) ≤ 3 dB reaches 10.1%. In the overlap band, the gains are > 4.5dBic. Additionally, the 3 dB beamwidth is more than 114°, and the beamwidth for AR ≤ 3 dB is more than 131° at 1.2 GHz.

Artificial neural networks (ANNs) have acquired enormous importance in computing of the performance parameters of microstrip antennas due to their generalized and adaptive features. However, recently the concept of support vector machines (SVMs) has become very much popular in performance parameters computation due to several attractive features over ANNs. Specifically, SVMs outreach ANNs noticeably in terms of execution time. Likewise, ANNs are having multiple local minima problem, whereas a global and unique solution is provided by SVMs. In this paper, several performance parameters like: resonant frequency, gain, directivity, and radiation efficiency of slotted microstrip antennas with modified ground plane are computed with the help of SVM formulation. Comparisons of different parameters of simulated and computed values are illustrated. The achieved radiation patterns at particular resonant frequency in different planes are included as well. A prototype of the optimized antenna is also fabricated and characterized. A good agreement is attained among the computed, simulated, and measured results.

In this work, microstrip antenna with W- and V-shaped radiating patches have been proposed. Here square- and circular-shaped modified ground planes have been designed by poly tetra fluoro ethylene (PTFE) substrate with dielectric constant 2.4. Broadband with high gain is obtained by optimum selection of radiating patch with modified ground plane. The ground planes are modified by loading a U-shaped slot. The simulated and measured results are compared. Considering −10 dB impedance bandwidth maximum frequency band of 6.97 GHz (3.04–10.01 GHz) with percentage bandwidth of 106.8% is achieved. The proposed antenna exhibits maximum peak gain of 5.1 dBi. The simulation and measurement have been done by Ansoft designer software and vector network analyzer.

In this paper, a miniaturized coaxial feed curved-slotted microstrip patch antenna over a fractalized uniplanar compact electromagnetic bandgap (F-UC-EBG) ground plane is proposed and investigated. Compact size is achieved by cutting the curved slots along the orthogonal directions of the patch radiator. The curved-slotted microstrip patch antenna is 38.30% miniaturized as compared with the conventional microstrip patch antenna resonating at 2.38 GHz. Furthermore, the ordinary ground plane of the curved slotted patch antenna is replaced by the F-UC-EBG ground plane. Due to the slow wave phenomenon created in the F-UC-EBG structure and the better impedance matching at the lower frequency further miniaturization and improved performance are obtained. The proposed antenna shows 74.76% miniaturization as compared with the conventional microstrip patch antenna resonating at 1.57 GHz and has 2.61% 10-dB fractional bandwidth, 1.49 dB gain, and 81.59% radiation efficiency. The proposed antenna is fabricated on a low-cost FR4 substrate having an overall volume of 0.184λ0 × 0.184λ0 × 0.0236λ0 at 1.57 GHz GPS band. The measured and simulated results are in good agreement and predicting appropriateness of the antenna in portable and handheld communication systems for GPS applications.

Modeling and design of rectangular microstrip patch printed on isotropic or anisotropic substrate are accomplished in this paper. The use of spectral domain method in conjunction with artificial neural networks (ANNs) to compute the resonant characteristics of rectangular microstrip patch printed on isotropic or anisotropic substrates. The moment method implemented in the spectral domain offers good accurateness, but its computational cost is high owing to the evaluation of the slowly decaying integrals and the iterative nature of the solution process. The paper introduces the electromagnetic knowledge combined with ANN in the analysis of rectangular microstrip antenna on uniaxially anisotropic substrate to reduce the complexity of the spectral domain method and to minimize the CPU time necessary to obtain the numerical results. The numerical comparison between neurospectral and conventional moment methods shows significant improvements in time convergence and computational cost. Hence, the use of neurospectral approach presented here as a promising fast technique in the design of microstrip antennas.

A circularly polarized (CP) and high gain Microstrip antenna is designed in this paper using metamaterial concepts. The antenna, built on a metamaterial substrate, showed significant size reduction and less mutual coupling in an array compared with similar arrays on conventional substrates. Demonstrated to have left-handed magnetic characteristics, the methodology uses complementary split-ring resonators (SRRs) placed horizontally between the patch and the ground plane. In order to reduce mutual coupling in the array structure, hexagonal-SRRs are embedded between antenna elements. The procedure is shown to have great impact on the antenna performance specifically its bandwidth which is broadened from 400 MHz to 1.2 GHz for X-band and as well as its efficiency. The structure has also low loss and improved standing wave ratio and less mutual coupling. The results show that a reduction of 26.6 dB in mutual coupling is obtained between elements at the operation frequency of the array. Experimental data show a reasonably good agreement between simulation and measured results.

In this paper, a novel circularly polarized square slot microstrip antenna is proposed for radio frequency identification (RFID) applications. The circular polarization is achieved by incorporating an arc-shaped strip in the square slot antenna. This antenna is fed by deformed bent feeding line to achieve a broad bandwidth (BW). The key parameters of the antenna are used for parametric study to understand the influence on the antenna performance. To validate simulation results of the design, a prototype is fabricated on the commercially available FR4 material. Measured results show a good agreement with the simulated results. It is found that the antenna shows an impedance BW of 170 MHz (844–1014 MHz) and axial-ratio BW of 170 MHz (834–1004 MHz), which shows that the proposed antenna is a good candidate to be used as a RFID antenna.

A single-fed circularly polarized microstrip antenna is proposed where the antenna structure exhibits truncated corners in the radiating square patch. The truncated corners square patch structure is loaded with a circular slot and is resonating at 2.25 GHz with circular polarization. Furthermore, the proposed antenna is stacked using an upper circular patch thus achieving a dual-band circularly polarized pattern. The dual-band antenna resonates at 2.25 GHz in the first band and with impedance bandwidth ranging from 4.4 to 5.5 GHz in the second band. The size of the proposed stacked structure is compact compared with the conventional circularly polarized stacked antenna designs. Proposed structures are fabricated and fed using Subminiature version A (SMA) connector. The measured results are in good agreement with the simulated. The antenna shows stable radiation characteristics for the entire band of operation.

The narrow bandwidth of microstrip antennas is one of the most important features that restrict its wide usage. This paper presents a new coplanar waveguide-fed compact rectangular microstrip antenna with the improvement of the bandwidth using the slot geometry and cutting rectangular periodic edges for the patch radiator. To develop this structure, we have conducted many optimization and investigation using Momentum Software integrated into ADS “Advanced Design System” and comparison of the results with CST Microwave Studio. The comparison between the simulation and measurement results permits to validate the final achieved antenna with an improvement of the bandwidth. This antenna has wide matching input impedance ranging from 1.7 to 3.5 GHz with a return loss less than −10 dB, corresponding to bandwidth 69.7% at 2.6 GHz as a frequency center. The antenna achieved is a low cost, planar, and easy to be fabricated, thus promising for multiple applications in wireless communication systems. Details of the proposed antenna design and both simulated and experimental results are described and discussed.

A high-gain microstrip patch-type WiMAX antenna operating at 3.5 GHz has been designed with a parasitic radiator and a raised ground plane. Antenna design has been carried out through extensive three-dimensional electromagnetic simulations. The patch antenna itself provides a realized gain of about 3.6 dB at 3.5 GHz. When a parasitic radiator is placed on top of the patch antenna, the gain increases from about 3.6 dB to about 7.4 dB. The raised ground plane further enhances the gain by about 1.5 dB. Hence the overall gain improvement is about 5.3 dB without the need of a radio-frequency amplifier.