With the development of the communication field, more and more communication devices need multiple single-frequency antennas to work simultaneously. However, using multiple single-frequency antennas results in larger sizes. The miniaturized and dual-band communication system has become a new development trend. This paper designs a dual-band filtering patch antenna based on a multimode resonator, which is cascaded. The filter resonator part adopts step impedance resonance for branch shunt design, which can flexibly control the center frequency of two frequency bands. The filtering antenna utilizes a dual-layer substrate structure and achieves an integrated design through coupling probe feeding. This reduces the horizontal dimensions and improves miniaturization. Multiple radiation nulls are introduced outside the two-passband, and roll-off characteristics are evident. In addition, this design realizes high selectivity in the operating band. The antenna has large gains of 1.71 dBi and 6.25 dBi. It has good filtering and radiation characteristics.

A 2 × 2 dual band MIMO flexible antenna with a low profile and CPW feeding is designed for Internet of Things (IoT) domains, operating in 5G (3.3–3.6/4.8–5.0 GHz), WiMAX (5.25–5.85 GHz) and WLAN (5.15–5.35/5.725–5.825 GHz) bands. Two resonant frequencies are generated by L-shaped branches and a rectangular monopole. The mentioned MIMO antenna comprises four elements arranged vertically. With the addition of an orthogonal branch, significant isolation is attained, which exceeds 21 dB in the entire bands. The four-element MIMO antenna is fabricated and experimented to analyze the performance. According to the measurement, the antenna can operate bandwidth covering 3.156–3.84 GHz (19.55%) and 4.638–6.348 GHz (31.13%). Furthermore, the provided four-element MIMO antenna possesses a number of advantageous properties, such as ECC, DG, and TARC, indicating its suitability for 5G/WiMAX/WLAN applications. In accordance with the results of bending measurement and human body influence, it is evident that the presented liquid crystal polymer antenna could be an ideal candidate for integrating into wearable 5G/WiMAX/WLAN devices.

A dual-band dual-linearly polarized waveguide slot array antenna is proposed in this paper. Two orthogonal slots share a short-circuit wall on broad side. The horizontal and vertical slots, which actualize dual-frequency bands and dual-linear polarization, generate vertically polarized electric fields in 9.39–9.78 GHz and horizontally polarized electric fields in 11.62–12.3 GHz, respectively. The equivalent permittivity of the waveguide is changed by two grooves at the bottom of the waveguide, which improves phase velocity. Two grooves can also reduce the distance between the elements while suppressing the side lobes. Compared to filling the medium in the waveguide, two grooves have less losses. Moreover, the antenna is simple with one input port. The array antenna also overcomes the problems of beam scanning compared with the traditional waveguide slot array antenna. A 1 × 8 antenna array is fabricated and measured to verify the design. The horizontal polarization is formed in 9.39–9.78 GHz, the vertical polarization is generated in 11.62–12.3 GHz, and the antenna gain can reach 15 dBi.

Designing miniaturized multiband antennas to cover both the 5G new radio frequencies (FR1 and FR2) simultaneously is a challenge for wireless communication researchers. This paper presents two antenna designs : a dual-band printed antenna of size 18 × 16 × 0.285 mm3 operating at FR1–5.8 GHz and FR2–28 GHz and a triple-band printed antenna with dimensions 30 × 25 × 0.543 mm3 operating at FR1–3.5 GHz and 5.8 GHz (sub-6 GHz microwave frequency bands) and FR2–28 GHz (mm-wave frequency band). The final projected triple-band antenna has a compact size with an impedance bandwidth of 12.71%, 11.32%, and 18.3% at 3.5 GHz, 5.8 GHz, and 28 GHz, respectively with the corresponding gain of 1.86 dB, 2.55 dB, and 4.41 dB. The measured radiation characteristics of the fabricated prototypes show that the proposed designs are suitable for trendy 5G-RFID and mobile Internet of things (IoT) applications.

This paper presents a fully integrated three-way Doherty architecture to address the challenges of 5G applications using laterally-diffused metal-oxide semiconductor (LDMOS) technology. By using the so-called CDS cancelation method for the Doherty combiner design, a wideband impedance transformation is achieved, that combined with the three-way Doherty power amplifier (DPA) architecture allows for high efficiency in deep back-off, with a reduced load modulation for high bandwidth. Throughout this paper, the design approach and realization are described, while multiple critical design challenges will be addressed such as low frequency drain resonance optimization, impact of in-package coupling effects, and linearity versus efficiency tradeoff. Two state-of-the-art three-way fully integrated LDMOS DPA monolithic microwave integrated circuit (MMICs) are presented to demonstrate how these measures have been successfully applied to different power amplifier (PA) line-up components for 5G base station systems. First, a 60 W 1.8–2.2 GHz multi-stage device for driver application in true dual-band operation is presented. The circuit design pays special attention to extended PA video bandwidth thanks to integrated passive device. After digital pre-distortion (DPD) in dual-band operation, this highly linear device achieves an outstanding adjacent channel leakage ratio (ACLR) of −56 dBc for a 2cLTE 20 MHz 8 dB peak-to-average ratio signal spaced by 345 MHz, thus 385 MHz instantaneous bandwidth (IBW), with 29% efficiency at 35 dBm, 12 dB output back-off (OBO). Second, the simulation and measurement results of a 55 W 2.6 GHz multi-stage DPA for massive-MIMO final stage application are presented, which yields an excellent linearized efficiency of 49% using a 200 MHz 10cLTE signal with an ACLR lower than −47.5 dBc. For 8cLTE 20 MHz (160 MHz IBW), the device yields 50% efficiency with −50.7 dBc ACLR linearized after DPD. The achieved efficiency is well comparable to published GaN DPAs. These results were achieved by improved simulation techniques to minimize frequency dispersion and thus allow high efficiency operation over wide bandwidth. Both devices show that LDMOS is not only a mature technology which allows those PAs to be reliable and low-cost for mass production in very compact packages, but also provide best-in-class RF performance according to the needs of 5G base station systems.

In this paper, a novel miniaturized and flexible dual band frequency selective surface (FSS) is presented. This FSS provides effective shielding in X-band and Ku- band, with a frequency response of 9.4 and 16.7 GHz, respectively. The proposed FSS provides 924 MHz bandwidth at X-band and 1.34 GHz bandwidth at Ku-band with an insertion loss of 20 dB. Moreover, the proposed design is polarization-independent and it provides stable frequency response at various angles of incidences for both transverse electric and transverse magnetic modes. More significantly, the proposed FSS analyzed the bandstop response of the selective frequency and also is suitable for conformal applications. A prototype of the proposed FSS is fabricated. The measured results and simulated results are good in agreement.

A superstrate loaded cylindrical dielectric resonator antenna is developed and demonstrated for dual-band circular polarization. The proposed antenna employs a microstrip-fed rotated cross-shaped slot coupling technique for exciting the dielectric resonator (DR). The design is developed in a straight forward way. Firstly, the DR is coupled with a conventional plus-shaped slot and operates in linear polarization mode at 7.4 and 11.2 GHz. Secondly, the slot is rotated by 10° to enable out-of-phase excitation and ensure circular polarization at the above-mentioned frequencies. In the third step, a square dielectric superstrate is placed above the DR which creates multiple reflection and enhance the gain up to ~8 dBi in both the frequencies without affecting other performances. The development stages are discussed in detail. The proposed design is demonstrated through prototype fabrication and characterization. This antenna can be used for X-band satellite communications.

This paper reports an integration of dual band microstrip antenna with thin film amorphous silicon solar cell which creates a wearable system to harvest microwave energy. The multiple layers in the encapsulation of the thin film solar cell are used as a substrate for microstrip antenna. The rectifier and matching circuit are designed on cotton jeans material and the whole system is mechanically supported by the foam of 5 mm thick. The performance of the antenna is studied for the mechanical bending condition. The device has maintained good power conversion efficiency. The efficiency of the voltage doubler is tested by varying radio frequency power levels from −30 to10 dBm. The voltage doubler conversion efficiency at 1.85 and 2.45 GHz are 58 and 43%, respectively, for a load of 7.5 kΩ for an input power level of −5 dBm.

A novel planar dual-band bow-tie slotted patch antenna backed by high-impedance surface (HIS) is designed at 2.5 and 3.5 GHz for wireless application. The antenna employs coplanar waveguide fed patch and bow-tie slot as radiating elements. The bow-tie slot enables dual-band operation for the antenna. The HIS is made asymmetric in design to make it polarization dependent. This polarization-dependent HIS is eventually designed to reflect circularly polarized waves from linearly polarized incident waves.

A high selective dual band and miniaturized electromagnetic band gap (EBG) unit cell is presented in this paper. The analysis and characterization of the new cell are explained. The modified compact EBG unit cell is based on cutting two inverted U-shaped slots inside the typical mushroom-like EBG. The modified EBG has a 70% size reduction. The dual-band functionality of the structure is confirmed by applying it in a dual-notch ultra-wideband antenna (3.1–10.6 GHz), and the notch frequencies are 5.2 and 5.8 GHz. The dual-band functionality has advantages of a highly selective bandpass between them. The antenna can suppress interference frequencies in less than 100 MHz bandwidth without affecting the antenna performance in the whole bandwidth. Presented results are addressed in terms of circuit modeling, 3D full-wave simulations, and measurements.

In this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

A novel low profile dual band patch antenna is presented. It consists of a composite right/left-handed transmission line (CRLH TL) unit cell gap coupled with the radiating edge of a rectangular patch antenna. The dual band behavior is achieved by coupling the zeroth order resonance mode of CRLH TL and TM10 mode of the patch antenna. It is shown that frequency ratio can be changed by varying the gap between the patch and CRLH TL unit cell. The proposed configuration enables frequency reconfigurability by changing the CRLH TL unit cell using a switch. A prototype of the antenna having frequency ratio f2/f1 = 1.08 is designed and fabricated. The proposed antenna shows measured S11 ≤ −10 dB bandwidth of 100 and 50 MHz at resonance frequencies of f1 = 4.84 and f2 = 5.22 GHz, respectively. A 2 × 2 dual band CRLH TL coupled patch array is also presented, showing more than 12.7 dBi gain at both resonance frequencies.

A compact dual-band microstrip bandpass filter (BPF) is presented for application at the frequencies 2.4 and 5.84 GHz. The proposed main resonator consists of two L-shaped resonators. To improve the upper-stopband of the proposed filter, modified U-Shaped resonators are accepted. The operation mechanism of the filter is investigated based on proffered equivalent-circuit model and transformation function. The sketched dual-band BPF attends the insertion loss less than 0.1 and 0.4 dB Also the return loss is 26 and 28 dB at 2.4 and 5.84, respectively. This proffered filter structure is proper for Bluetooth and wireless local area networks and other wireless communication systems. An overall good agreement between measured and simulated results is observed.

This paper presents application of split ring resonators (SRR) in conventional waveguide slot array antenna to achieve performance improvement and multiband characteristics. Three SRRs have been placed on the transverse plane of a conventional slotted waveguide and has been simulated and measured. The measured results show that the antenna has dual band response with respective 10 dB return loss bandwidth 8.23–9.23 GHz (11.45%) and 9.68–11.01 GHz (12.87%). The measured gain and radiation pattern reveal that the proposed antenna has higher gain and front to back radiation ratio as compared with a conventional slotted waveguide antenna. Equivalent circuit of the proposed antenna also has been presented.

A novel dual-band planar antenna with a low profile for mobile communication system is proposed in this paper. The antenna is composed of one shorted patch with two radiating notches for low frequency resonance and one square patch for high frequency resonance. The low profile is achieved via the shorting patch, which introduces the parallel electrical field between the reflector and antenna. A step-impedance microstrip line is used to feed the antenna. The coupling between the square patch and microstrip line cancels out the inductance of shorting probe, which increases the working bandwidth of proposed antenna. A prototype with a low profile of 0.0286λ is fabricated and measured. The antenna achieves dual impedance bandwidths of 1.6% for the low frequency band and 60% for the high frequency band, covering the frequency range 851–865 MHz and 1.97–3.65 GHz, respectively. The measured results show good agreements with the simulated ones.

In this paper, a new asymmetric structure is proposed for the dual-band unequal application, in which both open- and short-ended stubs are applied. Closed-form design equations are obtained for the proposed power divider using the modified even- and odd-mode analysis method. It is observed that the proposed power divider can operate at high frequency ratio from 2.3 to 3.7 and has a wide operating band. Besides, this proposed circuit can offer flexibility in fabrication. For verification, two power dividers operate at 1/2.5 GHz with different values of line impedance are fabricated and tested. There is good agreement between simulation and experimental results, validating the proposed design concepts.

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

This paper proposes the design of tunable dual-band resonators for multi-band multi-standard systems. The main objective is to provide frequency tunability in the second resonance while maintaining the first resonance fixed. To this end, two tunable resonators are proposed: the capacitive-loaded stepped-impedance resonator and the capacitive-loaded hole resonator. The work is divided into two main parts. In the first part, an in-depth analysis of the capacitive-loaded stepped-impedance resonator (SIR) structure is done; it provides analytical closed-form design equations that ease the resonator design in contrast to the several approaches available in the literature to date. The analysis is also particularized to the case of the capacitive-loaded constant-section resonator and extended to the capacitive-loaded hole resonator. In addition, a study of the quality factor in capacitively tuned SIRs is also provided. In the second part, resonators are integrated in three dual-band tunable filters, one based on the capacitive-loaded constant-section resonator, another one on the capacitive-loaded SIR, and finally on the capacitive-loaded hole resonator. Two of these filters demonstrate operation in wireless local-area network frequency bands, with a fixed first band at 2.45 GHz and a second band which can be tuned between 5.75 and 5.25 GHz.

This paper presents a feasibility study for the implementation of a concurrent dual-band power amplifier (PA) design suitable for 1.98 GHz WCDMA and 3.42 GHz WiMAX digital systems. The proposed PA design was compared with a test bed based on a pair of dedicated single-frequency band PAs. The dual-band PA exhibited simultaneous peak output power levels of 24 and 17 dBm in the lower and in the higher bands to maintain ACPR and EVM requirements below 33 dBc and 5%, respectively. The conclusions drawn in the paper justify the design effort of this innovative solution, which is capable of increasing the PAE for concurrent dual-band operation maintaining the performance of more conventional solutions.

This paper presents an investigation of a concurrent low-cost dual-band power amplifier (PA) fabricated in SiGe technology, able to simultaneously operate at two frequencies of 2.45 and 3.5-GHz, including an evaluation of its system level performance potentiality. Taking into account the technology novelty and the lack of device characterization and modeling, a hybrid (MIC) approach has been adopted both for a fast prototyping of the PA and for the evaluation of the device potentiality based on an extensive linear and nonlinear characterization. The comparison of PA performance in single-band or concurrent mode operation will be presented. In particular, the measured PA prototype shows an output power of 17.2 and 17-dBm at a 1-dB compression point, at 2.45 and 3.5-GHz, respectively, for CW single-mode operation, with a power added efficiency around 20%. System-level analysis predicts that, when the PA is operated under the 20-MHz Orthogonal Frequency-Division Multiplexing (OFDM) concurrent signals, the maximum output power levels to maintain the Error Vector Magnitude (EVM) within 5% are 11 and 3.5-dBm at 2.45 and 3.5-GHz, respectively. Moreover, new concepts and possible new system architectures for the development of the next generation of the multi-band transceiver front-end will be provided with an extensive system-level evaluation of the amplifier.