Integrated weed management practices that reduce selection for resistance on herbicides are critical to delay resistance. To quantify the reduction in selection for resistance placed on Palmer amaranth from 2,4-D applied postemergence in cotton, an experiment was conducted three times in Georgia during 2020 and 2021 evaluating the benefits of (i) a cover crop, (ii) preemergence herbicides, and (iii) timeliness of applications. When a timely total-postemergence program of glyphosate + 2,4-D was applied three times over the season in a conventionally tilled system, 281,690 glyphosate-resistant Palmer amaranth plants ha–1 were exposed to 2,4-D. Over 61,500 of these plants were exposed to multiple 2,4-D applications. Altering the production system to conservation tillage, and including a rolled-rye cover crop, reduced the total number of plants exposed to 2,4-D for the season by 72% and the number of plants exposed multiple times by 60%. Even more effective, including a mixture of residual preemergence herbicides reduced the number of plants exposed to 2,4-D at least once over 99.9%, and reduced multiple exposures over 99.3% for the season; this benefit was observed for both conventional and conservation tillage systems. Delaying the initial application of the total-postemergence program did not influence the number of Palmer amaranth plants treated at least once but increased the number of plants treated multiple times by a factor of 3.7 times. As a result of early-season weed competition, cotton height and yield reductions were also associated with both lack of preemergence residuals and delayed postemergence applications. When considering the goal of minimizing the number of Palmer amaranth treated with a postemergence application of 2,4-D in a cotton system, the preemergence was the most effective option followed by (fb) the cover crop fb making timely postemergence applications. However, the most effective approach was to utilize each of these tactics in the same growing season.

Waterhemp is a summer annual, broadleaf weed with high fecundity, short seed longevity in the soil, and wide genetic diversity. Populations have evolved resistance to five herbicide modes of action (Groups 2, 5, 9, 14, and 27), which are present across southern Ontario; this has increased the challenge of controlling this competitive weed species in corn, the most important grain crop produced worldwide and the highest-value agronomic crop in Ontario. Acetochlor is a Group 15 soil-applied residual herbicide that has activity on many grass and broadleaf weeds but has yet to be registered in Canada. The objective of this study was to ascertain whether mixtures of acetochlor with flumetsulam, dicamba, atrazine, isoxaflutole/diflufenican, or mesotrione + atrazine applied preemergence would increase the control of multiple-herbicide-resistant (MHR) waterhemp in corn. Five field trials were conducted between 2022 and 2023. No corn injury was observed. Acetochlor applied alone controlled MHR waterhemp 97% 12 wk after application (WAA). All herbicide mixtures controlled MHR waterhemp similarly at ≥98% 12 WAA; there were no differences among herbicide mixtures. Flumetsulam, dicamba, and atrazine provided lower MHR waterhemp control than all other herbicide treatments and did not reduce density or biomass. Acetochlor reduced waterhemp density 98%, while the acetochlor mixtures reduced density similarly at 99% to 100%. This study concludes that the acetochlor mixtures evaluated provide excellent waterhemp control; however, control was not greater than acetochlor alone. Herbicide mixtures should be used as a best management practice to mitigate the evolution of herbicide resistance.

Herbicides that inhibit protoporphyrinogen oxidase (PPO) are used in more than 40 agronomic and specialty crops across Georgia to manage weeds through residual and postemergence (POST) control. In 2017, a population of Palmer amaranth exhibiting reduced sensitivity to POST applications of PPO-inhibiting herbicides was identified by the University of Georgia. Seed were collected from the site along with a known sensitive population; distance between the samples was 200 m, increasing the likelihood of similar environmental and genetic characteristics. To quantify sensitivity for both preemergence (PRE) and POST uses, 21 greenhouse dose-response assessments were conducted from 2017 to 2022. After conducting initial rate-response studies, 13 doses per herbicide were chosen for the POST experiment; field use rates of fomesafen (420 g ai ha−1), lactofen (219 g ai ha−1), acifluorfen (420 g ai ha−1), and trifludimoxazin (25 g ai ha−1) ranging from 0× to 4× the field use rate for the susceptible population, and 0× to 40× for the suspect population were applied. Herbicide treatments included adjuvants and were applied to plants 8 to 10 cm in height. Relative resistance factors (RRFs) were calculated for control ratings, mortality, and biomass, and ranged from 105 to 318, 36 to 1,477, 215 to 316, and 9 to 49 for fomesafen, lactofen, acifluorfen, and trifludimoxazin, respectively. In the PRE experiment, herbicide applications included five to nine doses of fomesafen (1× = 210 g ai ha−1), flumioxazin (1× = 57 g ai ha−1), oxyfluorfen (1× = 561 g ai ha−1), and trifludimoxazin (1× = 38 g ai ha−1); doses ranged from 0× to 6× for the suspect population and 0× to 2× for the susceptible population. Visual control, mortality, and biomass RRFs ranged from 3 to 5 for fomesafen, 21 to 31 for flumioxazin, 6 to 22 for oxyfluorfen, and 8 to 38 for trifludimoxazin. Results confirm that a Georgia Palmer amaranth population is resistant to PPO-inhibiting herbicides applied both PRE and POST.

The herbicides that inhibit very-long-chain fatty acid (VLCFA) elongases are primarily used for residual weed control in corn, barley, oat, sorghum, soybean, sugarcane, certain vegetable crops, and wheat production fields in the United States. They act primarily by inhibiting shoot development of susceptible species, preventing weed emergence and growth. The objectives of this review were to summarize 1) the chemical family of VLCFA-inhibiting herbicides and their use in the United States, 2) the VLCFA biosynthesis in plants and their site of action, 3) VLCFA-inhibitor resistant weeds and their mechanism of resistance, and 4) the future of VLCFA-inhibiting herbicides. After their reclassification as Group 15 herbicides to include shoot growth-inhibiting herbicides (Group 8), the VLCFA-inhibiting herbicides are currently represented by eight chemical families (benzofurans, thiocarbamates, α-chloroacetamides, α-oxyacetamides, azolyl-carboxamides, isoxazolines, α-thioacetamides, and oxiranes). On average, VLCFA-inhibiting herbicides are applied once a year to both corn and soybean crops in the United States with acetochlor and S-metolachlor being the most used VLCFA-inhibiting herbicides in corn and soybean production, respectively. The site of action of Group 15 herbicides results from inhibition of the VLCFA synthase, which is encoded by several fatty acid elongase (FAE1)-like genes in VLCFA elongase complex in an endoplasmic reticulum. The VLCFA synthase is a condensing enzyme, and relies on a conserved, reactive cysteinyl sulfur in its active site that performs a nucleophilic attack on either the natural substrate (fatty acyl-CoA) or the herbicide. As of August 2023, 13 weed species have been documented to be resistant to VLCFA inhibitors, including 11 monocot weeds and two dicot weeds (Palmer amaranth and waterhemp). The isoxazolines (pyroxasulfone and fenoxasulfone) are the most recently (2014) discovered VLCFA-inhibiting herbicides. Although the intensity of VLCFA-inhibitor-directed discovery efforts has decreased over the past decade, this biochemical pathway remains a viable mechanistic target for the discovery of herbicide premixes and a valuable component of them.

Waterhemp has evolved resistance to seven herbicide modes of action in the United States and to five in Canada, which limits weed control options for producers. The objective of this research was to quantify the level and duration of residual control of multiple herbicide-resistant (MHR) waterhemp with five Group 15 herbicides (acetochlor, dimethenamid-p, flufenacet, pyroxasulfone, and S-metolachlor) applied preemergence in a non-crop area. Four field trials were conducted over a 2-yr period (2021, 2022) in southwestern Ontario, Canada. By 4 wk after application (WAA) 91% of waterhemp had emerged in the nontreated control area. The numerical control of waterhemp with all Group 15 herbicides, with the exception of pyroxasulfone, was greatest at 4 WAA, then control declined. Flufenacet provided the lowest waterhemp control; dimethenamid-p and S-metolachlor provided intermediate control, and acetochlor and pyroxasulfone provided the highest control. Waterhemp control with pyroxasulfone peaked at 6 WAA with 99% and declined to 77% at 12 WAA. Flufenacet (low and high rates) was predicted to reduce waterhemp emergence by 50% for 42 to 44 d after application (DAA). Dimethenamid-p, S-metolachlor, and acetochlor (both formulations and three rates) were predicted to reduce waterhemp emergence by 80% for 36, 43, and 33 to 51 DAA, respectively; in contrast, pyroxasulfone was predicted to reduce waterhemp emergence by 80% for 82 DAA. This study concludes that of the Group 15 herbicides evaluated, flufenacet provides the lowest and shortest residual control of waterhemp, and pyroxasulfone provides the highest and longest residual control of waterhemp.

The critical timing of weed removal (CTWR) is the point in crop development when weed control must be initiated to prevent crop yield loss due to weed competition. A field study was conducted in 2018 and 2020 near Scottsbluff, NE, to determine how the use of preemergence herbicides affects the CTWR in dry bean. The experiment was arranged as a split plot, with herbicide treatment and weed removal timing as main and sub-plot factors, respectively. Herbicide treatments consisted of no-preemergence application, or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai ha–1) applied preemergence. Sub-plot treatments included season-long weed-free, weed removal at: V1, V3, V6, R2, and R5 dry bean growth stages, and a season-long weedy control. A four-parameter logistic model was used to estimate the impact of time of weed removal, for all response variables including dry bean yield, dry bean plants m–1 row, number of pods per plant, number of seeds per pod, and seed weight. The CTWR based on 5% yield reduction was estimated to range from the V1 growth stage [(16 d after emergence (DAE)] to the R1 growth stage (39 DAE) in the no-preemergence herbicide treatment. In the preemergence-applied treatment, the CTWR began at the R2 growth stage (47 DAE). Number of dry bean plants m–1 row was reduced in the no-preemergence treatment when weed removal was delayed beyond the R2 growth stage in the 2020 field season. The use of preemergence herbicides prevented a reduction in the number of pods per plant in 2020, and the number of seeds per pod in 2018 and 2020. In 2018, the number of pods per plant was reduced by 73% when no preemergence herbicide was applied, compared to 26% in the preemergence-applied treatment. The use of preemergence-applied soil-active herbicides in dry bean delayed the CTWR and preserved yield potential.

Late-emerging summer annual weeds are difficult to control in dry bean production fields. Dry bean is a poor competitor with weeds, due to its slow rate of growth and delayed canopy formation. Palmer amaranth is particularly difficult to control due to season-long emergence and resistance to acetolactate synthase (ALS)-inhibiting herbicides. Dry bean growers rely on PPI and preemergence residual herbicides for the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objective of this experiment was to evaluate effect of planting date and herbicide program on late-season weed control in dry bean in western Nebraska. Field experiments were conducted in 2017 and 2018 near Scottsbluff, NE. The experiment was arranged in a split-plot design, with planting date and herbicide program as main-plot and subplot factors, respectively. Delayed planting was represented by a delay of 15 d after standard planting time. The treatments EPTC + ethalfluralin, EPTC + ethalfluralin followed by (fb) imazamox + bentazon, and pendimethalin + dimethenamid-P fb imazamox + bentazon, resulted in the lowest Palmer amaranth density at 3 wk after treatment and the highest dry bean yield. The imazamox + bentazon treatment provided poor Palmer amaranth control and did not consistently result in Palmer amaranth density and biomass reduction compared with the nontreated control. In 2018, the delayed planting treatment had reduced Palmer amaranth biomass with the pendimethalin + dimethenamid-P treatment, as compared with standard planting. Delaying planting did not reduce dry bean yield and had limited benefit in improving weed control in dry bean.

Palmer amaranth is one of the most troublesome weeds of soybean in the United States. To effectively control this weed it is necessary to optimize timing of PRE residual herbicides to mitigate Palmer amaranth emergence. Field studies were conducted in 5 site-years to assess the effect of application timing 12 to 16 d prior to planting (preplant) and at planting (PRE) on soybean injury and longevity of Palmer amaranth control using five residual herbicide treatments. A reduction in longevity of Palmer amaranth control was observed when S-metolachlor + metribuzin and flumioxazin + chlorimuron-ethyl were applied preplant vs. PRE in 2 of the 5 site years. Sulfentrazone, sulfentrazone + cloransulam-methyl, and saflufenacil + dimethenamid-P + pyroxasulfone + metribuzin did not reduce longevity of Palmer amaranth control when applied preplant vs. PRE in all 5 site-years. Visible estimates of soybean injury were lower at 21 d after planting when herbicides were applied 12 to 16 d preplant vs. PRE. These findings suggest that preplant applications can be used to reduce the potential for crop injury and may not result in reduced longevity of control when herbicides with a prolonged residual activity are used. Preplant herbicides increase the likelihood of the residuals being activated prior to subsequent weed emergence as opposed to PRE herbicides applied at soybean planting.

Diversity is key for sustainable weed management and can be achieved via both chemical and nonchemical control tactics. Genetically modified crops with two-way or three-way stacked herbicide-tolerant traits allow use of herbicide mixtures that would otherwise be phytotoxic to the crop. Early weed management (EWM) strategies promote the use of PRE herbicides with residual activity to keep the field free of weeds early in the season for successful crop establishment. To evaluate the respective sustainability and practicality of the two chemical-based management tactics (i.e., stacked traits and EWM), we used a population model of waterhemp, Amaranthus tuberculatus (Moq.) Sauer (syn. rudis), to simulate the evolution of resistance in this key weed species in midwestern U.S. soybean [Glycine max (L.) Merr.] agroecosystems. The model tested scenarios with a varying number of herbicide sites of action (SOAs), application timings (PRE and POST), and preexisting levels of resistance. Results showed that both tactics provided opportunity for controlling resistant A. tuberculatus populations. In general, each pass over the field should include at least two effective herbicide SOAs. Nevertheless, the potential evolution of cross-resistance may void the weed control programs embraced by stacked traits and diverse herbicide SOAs. Economic calculations suggested that the diversified programs could double long-term profitability when compared to the conventional system, because of improved yield and grain quality. Ultimately, the essence of a sustainable herbicide resistance management strategy is to be proactive. Although a herbicide-dominated approach to diversifying weed management has been prevalent, the increasing presence of weed populations with multiple resistance means that finding herbicides to which weed populations are still susceptible is becoming increasingly difficult, and thus the importance of reintroducing cultural and mechanical practices to support herbicides must be recognized.

Cover cropping is limited by seasonal constraints following corn harvest in the Upper Midwest of the United States. Grass, clover, and brassica cover crops can be interseeded in corn; however, this is problematic because cover crops must tolerate herbicide applications to manage weeds. The objective of this research was to determine the tolerance of broadcast interseeded annual ryegrass, oilseed radish, and crimson clover to PRE and POST residual herbicide applications in corn. From 2016 to 2018 field trials were conducted in Michigan to determine the tolerance of annual ryegrass, oilseed radish, and crimson clover to 13 PRE and 14 POST (applied to V2 corn) herbicides. Cover crops were interseeded into corn at the V3 and V6 stages. Greenhouse experiments to evaluate these species were also conducted from 2016 to 2018; PRE and POST herbicides were applied at 1×, 0.5×, and 0.25× (0.25× was PRE only) of field-application rates. Based on these results, annual ryegrass can be interseeded into V3 or V6 corn following a PRE application of atrazine, clopyralid, saflufenacil, bicyclopyrone, isoxaflutole, or mesotrione, or a POST application of atrazine, bromoxynil, or mesotrione. Oilseed radish can be interseeded into V3 or V6 corn following a PRE application of clopyralid, atrazine, S-metolachlor, bicyclopyrone, or isoxaflutole or at V6 following application of acetochlor, dimethenamid-P, or mesotrione. Oilseed radish can also be interseeded following POST application of atrazine (571 g ai ha−1), bromoxynil, fluthiacet, acetochlor, mesotrione, dicamba + diflufenzopyr, or dimethenamid-P + topramezone. In greenhouse trials, crimson clover was tolerant to rimsulfuron, saflufenacil, and pyroxasulfone applied PRE. Annual ryegrass and oilseed radish can be interseeded into corn at the V3 and V6 stages, but special attention must be given to cover crop species selection and herbicide label restrictions when following herbicide applications in corn.

Residual herbicides applied to summer cash crops have the potential to injure subsequent winter annual cover crops, yet little information is available to guide growers’ choices. Field studies were conducted in 2016 and 2017 in Blacksburg and Suffolk, Virginia, to determine carryover of 30 herbicides commonly used in corn, soybean, or cotton on wheat, barley, cereal rye, oats, annual ryegrass, forage radish, Austrian winter pea, crimson clover, hairy vetch, and rapeseed cover crops. Herbicides were applied to bare ground either 14 wk before cover crop planting for a PRE timing or 10 wk for a POST timing. Visible injury was recorded 3 and 6 wk after planting (WAP), and cover crop biomass was collected 6 WAP. There were no differences observed in cover crop biomass among herbicide treatments, despite visible injury that suggested some residual herbicides have the potential to effect cover crop establishment. Visible injury on grass cover crop species did not exceed 20% from any herbicide. Fomesafen resulted in the greatest injury recorded on forage radish, with greater than 50% injury in 1 site-year. Trifloxysulfuron and atrazine resulted in greater than 20% visible injury on forage radish. Trifloxysulfuron resulted in the greatest injury (30%) observed on crimson clover in 1 site-year. Prosulfuron and isoxaflutole significantly injured rapeseed (17% to 21%). Results indicate that commonly used residual herbicides applied in the previous cash crop growing season result in little injury on grass cover crop species, and only a few residual herbicides could potentially affect the establishment of a forage radish, crimson clover, or rapeseed cover crop.

Egyptian broomrape (Phelipanche aegyptiaca Pers.) is a root-parasitic weed that severely damages many crops worldwide, including tomato (Solanum lycopersicum L.). In Israel, the management protocol used for P. aegyptiaca in open-field tomato includes PPI sulfosulfuron at 37.5 g ai ha−1 to the top 10-cm soil layer. The objective of this study was to investigate the co-effect of sulfosulfuron application timing and variable degradation rate in soil on the control efficacy of P. aegyptiaca in tomato. Degradation of sulfosulfuron (80ng g−1 soil) at a temperature of 15C, measured in soil samples from three farms using liquid chromatography–tandem mass spectrometry, followed a first-order kinetics with variable degradation rate constant among sites (0.008 to 0.012 d−1). Incubation at 25 C increased sulfosulfuron degradation rate constant by a factor of 2 to 2.7 in soils from the different sites, with a similar degradation rate order among soils. A higher degradation rate in the soil resulted in a shorter period of residual activity, measured using a sorghum [Sorghum bicolor (L.) Moench.] bioassay. Phelipanche aegyptiaca management in open-field tomatoes was investigated in five independent field experiments. Sulfosulfuron soil concentration throughout the growing season (following preplant incorporation of 37.5 g ha−1) was calculated from laboratory-measured degradation rates, which were corrected to represent the effect of recorded temperatures at each field. At the end of the tomato growing season, control efficacy of P. aegyptiaca varied among experiments (70.4% to 100%) and positively correlated with predicted sulfosulfuron concentration at the critical period for seedling control (R2=0.67). The current study confirms that sulfosulfuron is degraded in soil to nonphytotoxic metabolites and that rapid degradation rates would result in reduced injury to P. aegyptiaca seedling and, consequently, lower control efficacy.

Field experiments were conducted in Louisiana and Mississippi from 2011 through 2013 to evaluate crop injury, weed control, and yield in field corn following pyroxasulfone applied PRE and POST. Pyroxasulfone PRE or POST did not injure corn at any evaluation. Barnyardgrass control was not improved with the addition of any POST treatment to pyroxasulfone alone or atrazine plus pyroxasulfone PRE; however, all POST treatments increased barnyardgrass control to at least 95% at all evaluations following atrazine PRE. All treatments that contained a PRE followed by POST application controlled browntop millet ≥90% at all evaluations. All POST treatments increased ivyleaf morningglory control to ≥92% following atrazine or pyroxasulfone alone PRE. However, control with atrazine plus pyroxasulfone PRE was similar or greater 28 d after POST than all treatments that received a POST application. In the absence of a POST treatment, pyroxasulfone or atrazine plus pyroxasulfone PRE controlled Palmer amaranth 93 to 96% at all evaluations, but atrazine alone PRE provided 84, 82, and 66% control 7, 14, and 28 d after POST, respectively. All programs that contained a PRE followed by POST herbicide treatment controlled Palmer amaranth >90% at all evaluations. Corn yield following all treatments except atrazine alone PRE and the nontreated were similar and ranged from 10990 to 12330 kg ha−1. This research demonstrated that pyroxasulfone can be a valuable tool for weed management in a corn weed management program.

The recent interest in cover crops as component of Midwest corn and soybean production systems has led to the need for additional research, including the effects of residual corn and soybean herbicide treatments on fall cover crop establishment. Field studies were conducted in 2013, 2014, and 2015 in Columbia, Missouri to investigate the effects of common residual herbicides applied in corn and soybean on establishment of winter wheat, tillage radish, cereal rye, crimson clover, winter oat, Austrian winter pea, Italian ryegrass, and hairy vetch. Cover crops were evaluated for stand and biomass reduction 28 d after emergence (DAE). Rainfall from herbicide application to cover crop seeding date was much greater in 2014 and 2015, which resulted in less carryover in these years compared to 2013. When averaged across all herbicides evaluated in these experiments, the general order of sensitivity of cover crops to herbicide carryover, from greatest to least was Austrian winter pea=crimson clover>oilseed radish>Italian ryegrass>hairy vetch>wheat >winter oat>cereal rye. Cereal rye had the fewest instances of biomass or stand reduction with only four out of the 27 herbicides adversely effecting establishment. Pyroxasulfone consistently reduced Italian ryegrass and winter oat biomass at least 67% in both the corn and soybean experiments. In the soybean experiment, imazethapyr- and fomesafen-containing products resulted in severe stand and biomass reduction in both years while flumetsulam-containing products resulted in the greatest carryover symptoms in the corn experiment. Results from these experiments suggest that several commonly used corn and soybean herbicides have the potential to hinder cover crop establishment, but the severity of damage will depend on weather, cover crop species, and the specific herbicide combination.

Cut-leaved teasel is an invasive weed along highway corridors and is classified noxious in four states, including Missouri. Few herbicides have been examined for cut-leaved teasel control. Herbicides were evaluated for efficacy on established plants and residual activity for suppressing seedling emergence. Various growth regulator herbicides, amino acid inhibitors, and paraquat were applied on established teasel at two locations in central Missouri in fall 2003 and spring 2004, and two additional locations in fall 2004 and spring 2005. At 2 wk after treatment (WAT), paraquat resulted in the highest injury of teasel (85%), but injury declined over time. At 4 WAT, teasel control was most consistent with dicamba + diflufenzopyr applied in spring, ranging from 75 to 94% control. At 8 wk, glyphosate, dicamba + diflufenzopyr, metsulfuron-methyl, imazapyr, and combinations of growth regulator herbicides with 2,4-D were most effective, with teasel control from 86 to 100%. Control with 2,4-D alone was inconsistent; sulfosulfuron, sulfometuron-methyl, and paraquat were ineffective. Residual herbicides did not reduce teasel seedling emergence the following year. A number of herbicides were effective in managing emerged plants but reinfestations of treated sites is likely, even with the residual herbicides used in this research.

Saflufenacil/dimethenamid-P is a relatively new prepackaged herbicide mixture that has the potential to provide enhanced weed control in soybean when tank-mixed with reduced doses of imazethapyr. Six field experiments were conducted over a 3-yr period (2011, 2012, and 2013) near Ridgetown and Exeter, Ontario, Canada, to determine the dose of imazethapyr, applied PRE, that must be added to saflufenacil/dimethenamid-P (245 g ai ha−1) to provide effective weed control in soybean. The predicted dose of imazethapyr PRE for 80% control of common lambsquarters, common ragweed, green foxtail, and velvetleaf 8 wk after soybean emergence (WAE) was 66, 180, 137, and 48 g ai ha−1, respectively. In contrast, when tank-mixed with saflufenacil/dimethenamid-P (245 g ha−1), the dose of imazethapyr PRE needed for 80% control of common lambsquarters, common ragweed, green foxtail, and velvetleaf was reduced to 11, 80, 48, and 18 g ha−1, respectively. The control of common lambsquarters, common ragweed, green foxtail, and velvetleaf was improved by 21, 23, 34, and 27%, respectively when saflufenacil/dimethenamid-P (245 g ha−1) was added to imazethapyr PRE. Imazethapyr at 104 g ha−1 resulted in soybean yield that was 95% of the weed-free control; however, when tank-mixed with saflufenacil/dimethenamid-P (245 g ha−1) only 54 g ha−1 of imazethapyr was required for the same yield level. Based on this study, PRE application of saflufenacil/dimethenamid-P with reduced doses of imazethapyr has the potential to improve soybean yield and provide acceptable weed control (≥ 80%); however, the extent that imazethapyr dose can be reduced is dependent upon weed community composition.

A survey questionnaire was sent to cotton consultants of Arkansas and Mississippi through direct mail and Louisiana and Tennessee consultants through on-farm visits in fall of 2011. The survey was returned by a total of 22 Arkansas, 17 Louisiana, 10 Mississippi, and 11 Tennessee cotton consultants, representing 26, 53, 13, and 38% of total cotton planted in these states in 2011, respectively. Collectively, the area planted to glyphosate-resistant (Roundup Ready®, RR) cotton was 97%, glyphosate plus glufosinate-resistant (Widestrike® Flex, WRF) cotton was 30%, and glufosinate-resistant (Liberty Link, LL) cotton was 2.6% of the total cotton surveyed in 2011. Seventy percent of area in all states is still under continuous RR/WRF cotton. Average cost of herbicides in RR systems was $114 ha−1 and in LL systems was $137 ha−1. Across the states, cotton planted under no-tillage, conservation tillage, and conventional tillage was 31, 36, and 33%, respectively, of total scouted cotton. Area under conventional tillage increased and conservation tillage decreased in Arkansas compared with a previous survey conducted in 2006. Palmer amaranth, morningglories, and horseweed in the order of listing were the most problematic weeds of cotton across Arkansas, Mississippi, and Tennessee. In Louisiana, however, morningglories were the most problematic weed followed by Palmer amaranth and common waterhemp. Glyphosate-resistant (GR) Palmer amaranth infested only 13% of scouted cotton area in Louisiana compared with 75% in the remaining three states, and consequently, hand-weeding to control GR Palmer amaranth is practiced on only 2.5% of total scouted area of Louisiana and 49% of the scouted area of the remaining three states. Hand-weeding added an additional $12 to 371 ha−1 to weed-management costs. One-half (50%) of the cotton consultants emphasized the need for more research on residual herbicides that can control GR Palmer amaranth effectively.

Field studies were conducted in 2000 and 2001 at Rohwer, AR. Trifloxysulfuron (5.3 and 8 g ai/ha) and pyrithiobac (70 g ai/ha) were applied preemergence (PRE) and postemergence (POST) broadcast at the two- to three-leaf (EP) and three- to four-leaf (MP) cotton growth stages. Both materials were also applied POST in combination with glyphosate at 560 g ae/ha or bromoxynil at 560 g ai/ha at both growth stages. Trifloxysulfuron applied EP or MP at 8 g/ha provided greater control of sicklepod and pitted morningglory 28 d after application (DAA) than trifloxysulfuron at 5.3 g/ha or pyrithiobac at 70 g/ha; however, control of prickly sida was greater with pyrithiobac than with trifloxysulfuron at either rate. Glyphosate alone controlled sicklepod, prickly sida, and pitted morningglory greater than 80%. The addition of trifloxysulfuron at 8 g/ha and pyrithiobac at 70 g/ ha increased control of all species over glyphosate alone 28 DAA. Bromoxynil at 560 g/ha controlled pitted morningglory and hemp sesbania at all application timings; however, sicklepod and Palmer amaranth control was less than 50% with bromoxynil applied alone. When bromoxynil was applied in combination with trifloxysulfuron at either rate, control of sicklepod and Palmer amaranth increased to 80% or greater at all application timings. Trifloxysulfuron has the potential to complement both the glyphosate-resistant and bromoxynil-resistant weed control programs by providing control of less susceptible weeds and by providing residual control to both programs.

Field studies were conducted near Clayton, Lewiston, and Rocky Mount, NC in 2005 to evaluate weed control and cotton response to preemergence treatments of pendimethalin alone or in a tank mixture with fomesafen, postemergence treatments of glufosinate applied alone or in a tank mixture with S-metolachlor, and POST-directed treatments of glufosinate in a tank mixture with flumioxazin or prometryn. Excellent weed control (> 91%) was observed where at least two applications were made in addition to glufosinate early postemergence (EPOST). A reduction in control of common lambsquarters (8%), goosegrass (20%), large crabgrass (18%), Palmer amaranth (13%), and pitted morningglory (9%) was observed when residual herbicides were not included in PRE or mid-POST programs. No differences in weed control or cotton lint yield were observed between POST-directed applications of glufosinate with flumioxazin compared to prometryn. Weed control programs containing three or more herbicide applications resulted in similar cotton lint yields at Clayton and Lewiston, and Rocky Mount showed the greatest variability with up to 590 kg/ha greater lint yield where fomesafen was included PRE compared to pendimethalin applied alone. Similarly, an increase in cotton lint yields of up to 200 kg/ha was observed where S-metolachlor was included mid-POST when compared to glufosinate applied alone, showing the importance of residual herbicides to help maintain optimal yields. Including additional modes of action with residual activity preemergence and postemergence provides a longer period of weed control, which helps maintain cotton lint yields.