Preservation of stochastic orders through the system signature has captured the attention of researchers in recent years. Signature-based comparisons have been made for the usual stochastic order, hazard rate order, and likelihood ratio orders. However, for the mean residual life (MRL) order, it has recently been proved that the preservation result does not hold true in general, but rather holds for a particular class of distributions. In this paper, we study whether or not a similar preservation result holds for the mean inactivity time (MIT) order. We prove that the MIT order is not preserved from signatures to system lifetimes with independent and identically distributed (i.i.d.) components, but holds for special classes of distributions. The relationship between these classes and the order statistics is also highlighted. Furthermore, the distribution-free comparison of the performance of coherent systems with dependent and identically distributed (d.i.d.) components is studied under the MIT ordering, using diagonal-dependent copulas and distorted distributions.

Developed sequential order statistics (DSOS) are very useful in modeling the lifetimes of systems with dependent components, where the failure of one component affects the performance of remaining surviving components. We study some stochastic comparison results for DSOS in both one-sample and two-sample scenarios. Furthermore, we study various ageing properties of DSOS. We state many useful results for generalized order statistics as well as ordinary order statistics with dependent random variables. At the end, some numerical examples are given to illustrate the proposed results.

In this paper, we establish some stochastic comparison results for largest claim amounts of two sets of independent and also for interdependent portfolios under the setup of the proportional odds model. We also establish stochastic comparison results for aggregate claim amounts of two sets of independent portfolios. Further, stochastic comparisons for largest claim amounts from two sets of independent multiple-outlier claims have also been studied. The results we obtained apply to the whole family of extended distributions, also known as the Marshall–Olkin family of distributions. We have given many numerical examples to illustrate the results obtained.

This paper investigates the ordering properties of largest claim amounts in heterogeneous insurance portfolios in the sense of some transform orders, including the convex transform order and the star order. It is shown that the largest claim amount from a set of independent and heterogeneous exponential claims is more skewed than that from a set of independent and homogeneous exponential claims in the sense of the convex transform order. As a result, a lower bound for the coefficient of variation of the largest claim amount is established without any restrictions on the parameters of the distributions of claim severities. Furthermore, sufficient conditions are presented to compare the skewness of the largest claim amounts from two sets of independent multiple-outlier scaled claims according to the star order. Some comparison results are also developed for the multiple-outlier proportional hazard rates claims. Numerical examples are presented to illustrate these theoretical results.

In this paper we study the allocation problem of relevations in coherent systems. The optimal allocation strategies are obtained by implementing stochastic comparisons of different policies according to the usual stochastic order and the hazard rate order. As special cases of relevations, the load-sharing and minimal repair policies are further investigated. Sufficient (and necessary) conditions are established for various stochastic orderings. Numerical examples are also presented as illustrations.

This paper studies the optimal allocation policy of a coherent system with independent heterogeneous components and dependent subsystems, the systems are assumed to consist of two groups of components whose lifetimes follow proportional hazard (PH) or proportional reversed hazard (PRH) models. We investigate the optimal allocation strategy by finding out the number $k$ of components coming from Group A in the up-series system. First, some sufficient conditions are provided in the sense of the usual stochastic order to compare the lifetimes of two-parallel–series systems with dependent subsystems, and we obtain the hazard rate and reversed hazard rate orders when two subsystems have independent lifetimes. Second, similar results are also obtained for two-series–parallel systems under certain conditions. Finally, we generalize the corresponding results to parallel–series and series–parallel systems with multiple subsystems in the viewpoint of the minimal path and the minimal cut sets, respectively. Some numerical examples are presented to illustrate the theoretical findings.

Copula is one of the widely used techniques to describe the dependency structure between components of a system. Among all existing copulas, the family of Archimedean copulas is the popular one due to its wide range of capturing the dependency structures. In this paper, we consider the systems that are formed by dependent and identically distributed components, where the dependency structures are described by Archimedean copulas. We study some stochastic comparisons results for series, parallel, and general $r$-out-of-$n$ systems. Furthermore, we investigate whether a system of used components performs better than a used system with respect to different stochastic orders. Furthermore, some aging properties of these systems have been studied. Finally, some numerical examples are given to illustrate the proposed results.

This paper investigates the issue of stochastic comparison of multi-active redundancies at the component level versus the system level. Based on the assumption that all components are statistically dependent, in the case of complete matching and nonmatching spares, we present some interesting comparison results in the sense of the hazard rate, reversed hazard rate and likelihood ratio orders, respectively. And we also obtain two comparison results between relative agings of resulting systems at the component level and the system level. Several numerical examples are provided to illustrate the theoretical results.

Most of the real-life populations are heterogeneous and homogeneity is often just a simplifying assumption for the relevant statistical analysis. Mixtures of lifetime distributions that correspond to homogeneous subpopulations were intensively studied in the literature. Various distributional and stochastic properties of finite and continuous mixtures were discussed. In this paper, following recent publications, we develop further a mixture concept in the form of the generalized α-mixtures that include all mixture models that are widely explored in the literature. We study some main stochastic properties of the suggested mixture model, that is, aging and appropriate stochastic comparisons. Some relevant examples and counterexamples are given to illustrate our findings.

This article discusses the stochastic behavior and reliability properties for the inactivity times of failed components in coherent systems under double monitoring. A mixture representation of reliability function is obtained for the inactivity times of failed components, and some stochastic comparison results are also established. Furthermore, some sufficient conditions are developed in terms of the aging properties of the inactivity times of failed components. Finally, some numerical examples are presented to illustrate the theoretical results.

Reliability properties associated with the classic models of systems with age replacement have been a usual topic of research. Most previous works have checked the aging properties of the lifetime of the working units using stochastic comparisons among the systems with age replacement at different times. However, from a practical point of view, it would also be interesting to deduce to which aging classes the lifetime of the system belongs, making use of the aging properties of the lifetime of its working units. The first part of this article deals with this problem. Further along, stochastic orderings are established between the systems with replacement at the same time using several stochastic comparisons among the lifetimes of their working units. In addition, the lifetimes of two systems with age replacement are compared as well. This is performed assuming stochastic orderings between the number of replacement until failure, and the lifetimes of their working units conditioned to be less or equal than the replacement time. Similar comparisons are accomplished considering two systems with age replacement where the replacements occur at a random time. Illustrative examples are presented throughout the paper.

The study of the distributions of sums of dependent risks is a key topic in actuarial sciences, risk management, reliability and in many branches of applied and theoretical probability. However, there are few results where the distribution of the sum of dependent random variables is available in a closed form. In this paper, we obtain several analytical expressions for the distribution of the aggregated risks under dependence in terms of copulas. We provide several representations based on the underlying copula and the marginal distribution functions under general hypotheses and in any dimension. Then, we study stochastic comparisons between sums of dependent risks. Finally, we illustrate our theoretical results by studying some specific models obtained from Clayton, Ali-Mikhail-Haq and Farlie-Gumbel-Morgenstern copulas. Extensions to more general copulas are also included. Bounds and the limiting behavior of the hazard rate function for the aggregated distribution of some copulas are studied as well.

The signature representation shows that the reliability of the system is a mixture of the reliability functions of the k-out-of-n systems. The first representation was obtained for systems with independent and identically distributed (IID) components and after it was extended to exchangeable (EXC) components. The purpose of the present paper is to extend it to the class of systems with identically distributed (ID) components which have a diagonal-dependent copula. We prove that this class is much larger than the class with EXC components. This extension is used to compare systems with non-EXC components.

This paper discusses stochastic comparisons for the residual and past lifetimes of coherent systems with dependent and identically distributed (d.i.d.) components under random monitoring in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orders. Some stochastic comparisons results are also established on the residual lifetimes of coherent systems under random observation times when all of the components are alive at that time. Sufficient conditions are established in terms of the aging properties of the components and the distortion functions induced from the system structure and dependence among components lifetimes. Numerical examples are provided to illustrate the theoretical results as well.

Relative ageing describes how one system ages with respect to another. The ageing faster orders are used to compare the relative ageing of two systems. Here, we study ageing faster orders in the hazard and reversed hazard rates. We provide some sufficient conditions for one coherent system to dominate another with respect to ageing faster orders. Further, we investigate whether the active redundancy at the component level is more effective than that at the system level with respect to ageing faster orders, for a coherent system. Furthermore, a used coherent system and a coherent system made out of used components are compared with respect to ageing faster orders.

The relative aging is an important notion which is useful to measure how a system ages relative to another one. Among the existing stochastic orders, there are two important orders describing the relative aging of two systems, namely, aging faster orders in the cumulative hazard and the cumulative reversed hazard rate functions. In this paper, we give some sufficient conditions under which one coherent system ages faster than another one with respect to the aforementioned stochastic orders. Further, we show that the proposed sufficient conditions are satisfied for k-out-of-n systems. Moreover, some numerical examples are given to illustrate the applications of proposed results.

In this paper, we consider exponentiated location-scale model and obtain several ordering results between extreme order statistics in various senses. Under majorization type partial order-based conditions, the comparisons are established according to the usual stochastic order, hazard rate order and reversed hazard rate order. Multiple-outlier models are considered. When the number of components are equal, the results are obtained based on the ageing faster order in terms of the hazard rate and likelihood ratio orders. For unequal number of components, we develop comparisons according to the usual stochastic order, hazard rate order, and likelihood ratio order. Numerical examples are considered to illustrate the results.

Recently, an alternative measure of uncertainty called extropy is proposed by Lad et al. [12]. The extropy is a dual of entropy which has been considered by researchers. In this article, we introduce an alternative measure of uncertainty of random variable which we call it cumulative residual extropy. This measure is based on the cumulative distribution function F. Some properties of the proposed measure, such as its estimation and applications, are studied. Finally, some numerical examples for illustrating the theory are included.

In the context of insurance, the smallest and largest claim amounts turn out to be crucial to insurance analysis since they provide useful information for determining annual premium. In this paper, we establish sufficient conditions for comparing extreme claim amounts arising from two sets of heterogeneous insurance portfolios according to various stochastic orders. It is firstly shown that the weak supermajorization order between the transformed vectors of occurrence probabilities implies the usual stochastic ordering between the largest claim amounts when the claim severities are weakly stochastic arrangement increasing. Secondly, sufficient conditions are established for the right-spread ordering and the convex transform ordering of the smallest claim amounts arising from heterogeneous dependent insurance portfolios with possibly different number of claims. In the setting of independent multiple-outlier claims, we study the effects of heterogeneity among sample sizes on the stochastic properties of the largest and smallest claim amounts in the sense of the hazard rate ordering and the likelihood ratio ordering. Numerical examples are provided to highlight these theoretical results as well. Not only can our results be applied in the area of actuarial science, but also they can be used in other research fields including reliability engineering and auction theory.

In this paper, we consider optimal components grouping in series–parallel and parallel–series systems composed of k subsystems. All components in each subsystem are drawn from a heterogeneous population consisting of m different subpopulations. Firstly, we show that when one allocation vector is majorized by another one, then the series–parallel (parallel–series) system corresponding to the first (second) vector is more reliable than that of the other. Secondly, we study the impact of changes in the number of subsystems on the system reliability. Finally, we study the influence of the selection probabilities of subpopulations on the system reliability.