Convective heat transfer in a parallel plate microchannel gas flow is investigated analytically and numerically, considering the effects of viscous dissipation, pressure work, shear work, axial conduction and rarefaction. Analysis is performed with constant wall temperature and constant wall heat flux boundary conditions for both gas cooling and heating. The results presented demonstrate the significance of the combined effect of pressure work and viscous dissipation, shear work, rarefaction degree and axial conduction on microchannel convective heat transfer, in both the thermally developing and fully developed flow regions. Viscous dissipation and pressure work in a pressure-driven microchannel gas flow are of comparable magnitudes and may not be neglected from the energy equation. The shear work at the wall, which is effectively the combined effect of viscous dissipation and pressure work, needs to be included in the Nusselt number for better predictions of heat transfer.

In this investigation, we intend to present the influence of the prominent viscous dissipation and Soret effects on mixed convection heat and mass transfer over the vertical frustum of a cone in a nanofluid. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. In addition, the uniform wall nanoparticle condition at the surface is replaced with the zero nanoparticle mass flux condition to execute physically applicable results. The governing equations of a nanofluid flow in the dimensional form are reduced to a system of partial differential equations in the non-dimensional form by using suitable non-similarity variables and then solved by using a recently introduced spectral method named as Bivariate Pseudo-Spectral Local Linearisation Method (BPSLLM). The convergence and error analysis tests are conducted to examine the accuracy of the spectral method. To validate the method, the present numerical results are compared with the existing results in some special cases and the outcomes are observed to be in very good agreement. The effects of Brownian motion, thermophoresis, Eckert number, Soret number, nanoparticle and regular buoyancy parameters on the dimensionless surface drag, heat, nanoparticle mass and regular mass transfer rates over the vertical frustum of a cone are discussed and illustrated graphically.

We consider a mathematical model which describes the quasi-static evolution of a thermo-viscoelastic linear body with taking into account the effects of internal forces which generate a non linear viscous dissipative function. We derive a variational formulation of the system of equilibrium equation and energy equation. An existence result of weak solutions was obtained in an appropriate function space.

Effects of viscous dissipation and radiation on MHD natural convection in oblique porous cavity with constant heat flux is studied numerically in the present article. The right inclined wall is maintained at a constant cold temperature Tc and the left inclined wall has a constant heat flux q with length S, while the remainder of the left wall is adiabatic. The horizontal walls are assumed to be adiabatic. The governing equations are obtained by applying the Darcy model and Boussinesq approximations. COMSOL's finite element method is used to solve the non-dimensional governing equations together with specified boundary conditions. The governing parameters of this study are Rayleigh number (Ra=10,100,200,250,500 and 1000), Hartmann number (0≤ Ha ≤20), inclination angle of the magnetic field (0° ≤ ω ≤ π/2), Radiation (0≤R≤15), the heater flux length (0.1≤H≤1) and inclination angle of the sloping wall (–π/3≤ϕ≤π/3). The results are considered for various values of the governing parameters in terms of streamlines, isotherms and averageNusselt number. It is found that the intensity of the streamlines and the isotherm patterns decrease with an increment in Hartmann number. The overall heat transfer is significantly increased with the increment of the viscous dissipation and the radiation parameters.

This work examines the magnetohydrodynamic (MHD) flow of second grade fluid due to a stretching cylinder with viscous dissipation. Advance heat transfer technique namely the Newtonian heating is employed to explore the characteristics of heat transfer phenomenon in the presence of Joule heating. Mass transfer is discussed with the combination of both homogeneous and heterogeneous reactions. Diffusion coefficients of species A and B are considered of the same size. Heat production due to chemical reaction is assumed negligible. Appropriate transformations are employed to convert the nonlinear partial differential equations to the nonlinear ordinary differential equations. Convergent solutions of momentum, energy and concentration equations are developed. Characteristics of different involved parameters on the velocity and temperature fields are shown graphically. Numerical values of skin friction coefficient and Nusselt number are computed and analyzed. Higher values of homogeneous reaction parameter results in the reduction of concentration profile while opposite behavior is observed for heterogeneous reaction parameter.

A theoretical study is presented for the problem of orthogonal axisymmetric stagnation flow towards an infinite horizontal plate with a constant velocity in the presence of viscous dissipation and heat generation. The governing equations are reduced to a system of nonlinear ordinary differential equations by means of appropriate transformations for the velocity components and temperature. The similarity equations are solved numerically using the Matlab routine bvp4c. The results are compared with those known from the literature and an excellent agreement is found. The effects of involved parameters on the x-wise velocity component, temperature, skin friction, heat transfer and entropy generation rate are presented in graphical and tabular forms. It was found that the Eckert number Ec, the Prandtl number Pr and the heat generation parameter α play a significant role on the temperature, heat transfer and entropy generation rate.

An investigation is carried out on mixed convection boundary layer flow of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface in which the heat transfer includes the effects of viscous dissipation, elastic deformation, thermal radiation, and non-uniform heat source/sink for two general types of non-isothermal boundary conditions. The governing partial differential equations for the fluid flow and temperature are reduced to a nonlinear system of ordinary differential equations which are solved analytically using the homotopy analysis method (HAM). Graphical and numerical demonstrations of the convergence of the HAM solutions are provided, and the effects of various parameters on the skin friction coefficient and wall heat transfer are tabulated. In addition it is demonstrated that previously reported solutions of the thermal energy equation given in [1] do not converge at the boundary, and therefore, the boundary derivatives reported are not correct.

A numerical study is carried out to study the effects of variable fluid properties on the boundary layer flow and heat transfer of a nanofluid at a flat sheet. The effects of Brownian motion, thermophoresis and viscous dissipation due to frictional heating are also considered. The temperature-dependent variable fluid properties, namely, the fluid viscosity and the thermal conductivity are assumed to vary, respectively, as an inverse function and a linear function of temperature. Using a similarity transformation, the governing non-linear partial differential equations of the model problem are transformed into coupled non-linear ordinary differential equations and these equations are solved numerically by Keller-Box method. Velocity, temperature, and nanoparticles volume fraction profiles are presented and analyzed for several sets of values of the governing parameters; namely, variable fluid viscosity, variable thermal conductivity, Brownaian motion, thermophoresis and plate-velocity parameters with changes in the Prandtl and Schmidt numbers. It is observed that there is an increase in the skin friction in the upstream movement of the plate: But quite the opposite is true in the downstream movement of the plate. Also, the effect of the Schmidt number and the Brownian motion parameter is to reduce the Sherwood number, where as the effect of thermophoresis parameter is to enhance it.

Convective flow and heat transfer in an inclined channel bounded by two rigid plates is studied, where the lower plate is fixed and upper plate is moving with a constant velocity. One of the regions filled with clear viscous fluid and the other region filled with the porous matrix saturated with a viscous fluid different from the fluid in the first region are considered. The coupled nonlinear equations are mainly solved numerically using finite difference method. It is found that the presence of porous matrix in one of the region reduces the velocity and temperature. Both the velocity and temperature profiles enhance as the values of buoyancy parameter GP, height ratio h, Brinkman number Br, density ratio n and thermal expansion ratio b increase but reduce as the values of porous parameter σ, viscosity ratio λand thermal conductivity ratio λT increase. The Nusselt numbers at upper plate diminish as GP, h and Br increase, whereas they increase as σ, λ and λT increase. The lower plate Nusselt numbers are reversely affected by the relevant parameters. The effect of σ and GP on shear stress profiles are drawn and discussed.

An analytical study on entropy generation considering viscous dissipation effect in the circular microchannel is reported. The fluid flow is steady, laminar, hydrodynamically fully developed and thermally developing. In the first law analysis, appropriate dimensionless variables are applied to solve the energy equation in the thermal entrance region of microchannel. Subsequently the obtained temperature field is used to derive an expression for entropy generation rate. The effect of Knudsen number and Brinkman number on the entropy generation rate and Bejan number in different axial location is presented.

Sous compression cyclique, les mousses polymériques montrent une perte progressive de résistance lorsque le nombre de cycles augmente. Le recouvrement de résistance après une période de repos suggère que ce comportement puisse être décrit par un effet de mémoire à long terme. On propose un modèle viscoélastique fondé sur la coexistence d'une énergie élastique non convexe et d'une dissipation de type visqueux. Des essais expérimentaux montrent la bonne correspondance entre le modèle et le comportement observé.