Hostname: page-component-7f64f4797f-7vssv Total loading time: 0 Render date: 2025-11-04T07:48:12.396Z Has data issue: false hasContentIssue false
  • English
  • Français

The peeling of a flexible strip attached by a viscous adhesive

Published online by Cambridge University Press:  28 March 2006

A. D. McEwan  and
G. I. Taylor
A. D. McEwan
Affiliation:
Cavendish Laboratory, Cambridge
G. I. Taylor
Affiliation:
Cavendish Laboratory, Cambridge
Get access Rights & Permissions [Opens in a new window]

Abstract

The peeling of a flexible strip from a rigid surface to which it is attached by a thin layer of adhesive is discussed, treating the adhesive as a Newtonian viscous fluid. This makes it possible to examine the flow and stress distributions ahead of the point where separation occurs. The conditions at this point are taken to be the same as those observed in other cases where a stream of viscous fluid separates into two. In particular, the effect of surface tension at the separating meniscus on the speed of peeling is predicted.

Experiments are described in which a sheet of ‘Melanex’ 4μm thick was laid on a sheet of fluid covering a piece of plate glass. The apparatus was designed to ensure that this was peeled off at a constant angle, and the speed of the separation meniscus, as well as the load on the sheet, was measured. The experimental results are analysed in the light of the theory and shown to be consistent with it.

An interesting feature is the prediction that at low peeling speeds there is a great reduction in the thickness of the adhesive layer immediately ahead of the line of separation. Although the initial thickness of the layer dictates the scale of the shape adopted by the strip ahead of this line, it exerts no effect upon the relation between the external variables.

It is noted that, when the adhesive layer remains intact ahead of separation, the physical appearance of commercially available tapes in slow peeling can resemble that of simple viscous adhesives.

Information

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 26 , Issue 1 , September 1966 , pp. 1 - 15
Copyright
© 1966 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Bickermann, J. J. 1957 J. Appl. Phys. 28, 148.
Bretherton, F. P. 1961 J. Fluid Mech. 10, 16.
Busse, W. F., Lambert, J. M. & Verdery, R. B. 1946 J. Appl. Phys. 17, 37.
Chang, F. S. C. 1960 Trans. Soc. Rheol. 4, 7.
Cox, B. G. 1962 J. Fluid Mech. 14, 8.
Fairbrother, F. & Stubbs, A. E. 1935 H. Chem. Soc. 1, 52.
Fordham, S. 1948 Proc. Roy. Soc., A 194, 1.
Kaelble, D. H. 1960 Trans. Soc. Rheol. 4, 4.
Pearson, J. R. A. 1960 J. Fluid Mech. 7, 48.
Pitts, E. & Greiller, J. 1961 J. Fluid Mech. 11, 3.
Saffman, P. G. & Taylor, G. I. 1958 Proc. Roy. Soc., A 245, 312.
Taylor, G. I. 1961 J. Fluid Mech. 10, 16.
Taylor, G. I. 1963 J. Fluid Mech. 16, 59.