Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-20T05:19:01.413Z Has data issue: false hasContentIssue false
  • English
  • Français

An experimental investigation into yaw control at high alpha on a chined forebody using slot blowing

Published online by Cambridge University Press:  04 July 2016

S. P. Williams  and
K. P. Garry
S. P. Williams
Affiliation:
College of Aeronautics Cranfield University , UK
K. P. Garry
Affiliation:
College of Aeronautics Cranfield University , UK
Get access Rights & Permissions [Opens in a new window]

Abstract

Results are presented from low-speed windtunnel tests on an isolated generic chined forebody with pneumatic methods of yaw control at high alpha. Measurements of forces and moments were made on the forebody at angles of attack in the range 0° ≤ ɑ ≤ 60°. Slot blowing through the chine edge at various angles and upper surface tangential blowing have been compared, and optimum configurations have been identified. The effects of forebody cross-sectional shape have also been investigated and have been found to be highly critical in determining blowing effectiveness. Limited flowfield visualisation is also presented in order to gain some understanding of the flow field characteristics.

Type
Research Article
Information
The Aeronautical Journal , Volume 100 , Issue 998 , October 1996 , pp. 355 - 363
Copyright
Copyright © Royal Aeronautical Society 1996 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Herbst, W.B. Future fighter technologies, J Aircr, August 1980, 17, (8), pp 561–566.Google Scholar
2. Herbst, W.B. Dynamics of air combat, J Aircr, July 1983, 20, (7), pp 594–598.Google Scholar
3. Boalbey, R.E., Ely, W.L. and Robinson, B.A. A sensitivity study for pneumatic vortex control on a chined forebody, A1AA Paper 93-0049, January 1994.Google Scholar
4. Malcolm, G.N. Forebody vortex control - a progress review, AIAA Paper 93-3540-CP.Google Scholar
5. Erickson, G.E. and Brandon, J.M. LOW speed experimental study of the vortex flow effects of a fighter forebody having uncon ventional cross-section, AIAA Paper 85-1798.Google Scholar
6. Kegelman, J.T. and Roos, F.W. Influence of forebody cross-section shape on the vortex flowfield structure at high alpha, AIAA Paper 91-3250.Google Scholar
7. Roos, F.W. and Kegelman, J.T. Aerodynamic characteristics of three generic forebodies at high angles of attack, AIAA Paper 91-0275.Google Scholar
8. Ravi, R. and Mason, W.H. Chined shaped forebody effects on directional stability at high alpha, J Aircr, May-June 1994, 31, (3).Google Scholar
9. O'neil, P.J., Nyberg, C., Deturk, R., Seal, D.W. and Grbthlein, C.E. Impact of agility requirements on configuration synthesis, NASA CR-4627, September 1994.Google Scholar
10. Arena, A.S., Nelson, R.C. and Schiff, L.B. Lateral control at high angles of attack using pneumatic blowing through a chined forebody, AIAA 93-3624-CP.Google Scholar
11. Cummings, R.M., Schiff, L.B. and Duino, J.D. Experimental investigation of tangential slot blowing on a generic chined forebody, AIAA Paper 94-3477-CP.Google Scholar
12. Agosta-Greenman, R.M., Gee, K., Cummings, R.M. and Schiff, L.B. Numerical analysis of tangential slot blowing on a generic-chined forebody, AIAA Paper 94-3475.Google Scholar
13. Wurtzler, K.E. Numerical analysis of a chined forebody with asymetric slot blowing, AIAA Paper 94-0171.Google Scholar
14. Agosta-Greenman, R.M., Gee, K., Cummings, R.M. and Schiff, L.B. Numerical analysis of tangential slot blowing on a generic chined forebody, AIAA Paper 94-3475.Google Scholar
15. Cummings, R.M., Schiff, L.B. and Duino, J.D. Experimental investigation of tangential slot blowing on a generic chined forebody, AIAA Paper 94-3477-CP.Google Scholar
16. O'rourke, M. Experimental investigation of slot blowing for yaw control on a generic fighter configuration with a chined forebody, AIAA Paper 95-1798, June 1995.Google Scholar
17. O'rourke, M. and Sedor, J. Forebody-mounted jet nozzles for yaw control on a generic fighter configuration with a chined forebody, AIAA Paper 95-3490, August 1995.Google Scholar
18. Mendenhall, M.R. and Lesieutre, D.J. Prediction of subsonic vortex-shedding from forebodies with Chines, NASA CR-4323, September 1990.Google Scholar
19. Alexander, A.J. Experimental investigation on a cropped delta wing with edge blowing, College of Aeronautics, Cranfield, Report No 162, June 1963.Google Scholar
20. Trebble, W.J.G. Exploratory investigation of the effects of blowing from the leading edge of a delta wing, RAE Technical Report No 66125, April 1966.Google Scholar
21. Williams, S.P. An Experimental Investigation Into Yaw Control At High Alpha On A Generic Chined Forebody Using Slot Blowing, College of Aeronautics, Cranfield, MSc Thesis, September 1995.Google Scholar