Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-28T22:00:53.483Z Has data issue: false hasContentIssue false
  • English
  • Français

Circular flight kite tests: converting to standard results

Published online by Cambridge University Press:  03 February 2016

J. C. Stevenson  and
K. V. Alexander
J. C. Stevenson
Affiliation:
Syft, Christchurch, New Zealand
K. V. Alexander
Affiliation:
University of Canterbury, Christchurch, New Zealand
Get access Rights & Permissions [Opens in a new window]

Abstract

Kite testing by flying in a horizontal circle, was developed in order to address the inevitable accuracy problems inherent in pre-existing kite measurement techniques. However the raw results from this circular flight method are not directly comparable with traditional kite performance measurements. To enable direct comparisons to be made, modifying equations have been developed to convert the raw circular flight results into the traditional measurements of lift to drag ratio, and lift coefficient. This paper derives the modifying equations, and presents experimental results comparing traditional measurements with both the raw and modified circular flight results. The modifying equations are applied to an example set of results to assess the sensitivity of the test environment parameters. It is concluded that for many cases, the discrepancy between the raw circular flight test results and traditional measurement techniques is small enough to ignore. Alternatively, the modifying equations given in the paper may readily be encoded so that traditional results may be quickly obtained from this novel test method.

Type
Research Article
Information
The Aeronautical Journal , Volume 110 , Issue 1111 , September 2006 , pp. 605 - 614
Copyright
Copyright © Royal Aeronautical Society 2006 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Stevenson, J.C., Traction Kite Testing and Aerodynamics, 2003, PhD thesis, University of Canterbury. Google Scholar
2. Stevenson, J.C., Alexander, K.V. and Lynn, P., Kite performance testing by flying in a circle. Aeronaut J, 2005, 109, (1096), pp 269–276.Google Scholar
3. Alexander, K.V. and Stevenson, J., A test rig for kite performance measurement, 2001, Proceedings of Institution of Mech Engineers, 215, Part B, pp 595–598.Google Scholar
4. Geola, J.S., Somu, N., Abedinzadeh, R. and Vijakumar, R., Wind loading effects on a caternary, J Wind Engineering and Industrial Aerodynamics, 1985, 21, pp 235–249.Google Scholar
5. Hoerner, S.F., Fluid Dynamic Drag, 1965, USA.Google Scholar
6. Alexander, K.V. and Stevenson., J.C., Kite Equilibrium and bridle length, Aeronaut J, 2001, 105, (1051), pp 535–541.Google Scholar