The Determination of Vibration Modes

Extract

At some stage in the design of every aeroplane it is necessary to estimate or to measure the resonance modes of vibration. This has not always been the case, but the problems of flutter, control reversal and dynamic loads have increased in importance as speeds have risen. Nowadays, it is an airworthiness requirement that these effects be considered and the aircraft made safe for all conditions of flight. A knowledge of the normal modes of vibration is essential for all accurate estimates of these aeroelastic effects.

Taking flutter as an example, the technique of flutter investigations consists of first determining which combinations of the various possible degrees of freedom are liable to excite dangerous oscillations. Typical degrees of freedom for a wing are bending and twist in each normal mode, aileron deflection and tab deflection; for a tailplane and elevator we might consider tailplane bending or twist, elevator deflection, tab deflection, fuselage bending and twist, and pitching of the whole aeroplane.