Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-28T05:18:09.014Z Has data issue: false hasContentIssue false

Progress in aerodynamic and aeroacoustic integration of CROR propulsion systems

Published online by Cambridge University Press:  27 January 2016

J. Yin
Affiliation:
DLR Institute of Aerodynamics and Flow Technology, Lilienthalplatz, Braunschweig, Germany
R. Akkermans
Affiliation:
DLR Institute of Aerodynamics and Flow Technology, Lilienthalplatz, Braunschweig, Germany

Abstract

Contra-Rotating Open Rotor (CROR) propulsion systems have seen renewed interest as an economic and environmentally friendly powerplant for future transport aircraft. Installation effects, i.e. the mutual interactions between airframe components and the rotors, have a pronounced impact on the aerodynamic and aeroacoustic performance for this type of engine. In the past five years, DLR’s Institute of Aerodynamics and Flow Technology has performed a number of numerical studies investigating important aspects relating to engine-airframe integration of CROR engines. In this article an overview of coupled aerodynamic and aeroacoustic simulations investigating representative pusher-configuration CROR engines will be given, focusing on the impact on aerodynamic performance and aeroacoustics caused by the presence of a pylon, the potential for noise reduction by employing trailing-edge blowing at the pylon trailing edge as well as the performance and noise variations caused by different senses of rotation of the rotors. It is shown that the interaction with the pylon strongly impacts blade performance and front rotor noise emissions but that the use of active flow control in the form of pylon trailing-edge blowing can alleviate these adverse installation effects to a notable extent.

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hager, R.D. and Vrabel, D. Advanced Turboprop Project, Technical Report NASA SP-495, NASA, 1988.Google Scholar
2. Gerhold, T. Overview of the Hybrid Rans Code TAU, Notes on Numerical Fluid Mechanics and Multidisciplinary Design (NNFM), 89, Springer Verlag, 2005, pp 8192.Google Scholar
3. Yin, J. and Delfs, J. Improvement of DLR Rotor Aeroacoustic Code (APSIM) and its Validation with Analytic Solution, 29th European Rotorcraft Forum, Friedrichshafen, Germany, 2003.Google Scholar
4. Stuermer, A. Unsteady CFD Simulations of Contra – Rotating Propeller Propulsion Systems, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA 2008-5218, Hartford, CT, USA, 2008.Google Scholar
5. Stuermer, A. and Yin, J. Low - Speed Aerodynamics and Aeroacoustics of CROR Propulsion Systems, 15th AIAA/CEAS Aeroacoustics Conference, AIAA 2009-3134, Miami, FL, USA, 2009.Google Scholar
6. Block, P.J.W. and Gentry, G.L. Directivity and Trends of Noise Generated by a Propeller in a Wake, Technical Report NASA TP-2609, NASA Langley Research Center, 1986.Google Scholar
7. Page, M.A,, Ivey, D.M. and Welge, R. Ultra High Bypass Engine Applications to Commercial and Military Aircraft, SAE Paper No. 861720, 1986.Google Scholar
8. Fite, E., Woodward, R. and Podboy, G. Effect of Trailing Edge Flow Injection on Fan Noise and Aerodynamic Performance; AIAA-2006-2844, 3rd AIAA Flow Control Conference; San Francisco, CA, USA, 2006.Google Scholar
9. Ricouard, J., Julliard, E., Omais, M., Regnier, V., Parry, A.B. and Baralon, S. Installation Effects on Contra-Rotating Open Rotor Noise, AIAA-2010-3795, 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, 2010.Google Scholar
10. Seitz, A., Kruse, M., Wunderlich, T., Bold, J. and Heinrich, L. The DLR Project LamAiR: Design of a NLF Forward Swept Wing for Short and Medium Range Transport Application, 29th AIAA Applied Aerodynamics Conference, AIAA 2011-3526, Hawaii, USA, 2011.Google Scholar
11. Stuermer, A., Arne, and Yin, J. Jianping: The Case for Counter-Rotation of Installed Contra-Rotating Open Rotor Propulsion Systems, AIAA2012-2785, 30th AIAA Applied Aerodynamics Conference, 25-28 June 2012, New Orleans, LA, USA.Google Scholar
12. Spalart, P. and Allmaras, S. A One-Equation Turbulence Model for Aerodynamic Flows, AIAA1992-0439, 1992.Google Scholar
13. Jameson, A. Time Dependent Calculations Using Multigrid, with Applications to Unsteady Flows Past Airfoils and Wings; 10th AIAA Computational Fluid Dynamics Conference; Honolulu, HI, USA, 1991.Google Scholar
14. Madrane, A., Raichle, A. and Stuermer, A: Parallel Implementation of a Dynamic Unstructured Chimera Method in the DLR Finite Volume TAU-Code; 12th Annual Conference of the CFD Society of Canada; Ottawa, Ontario, Canada; 524534; 2004.Google Scholar
15. Yin, J. and Ahmed, S. Prediction and its Validation of the Acoustics of Multiblade Rotors in Forward Flight Utilizing Pressure Data from a 3D FreeWake Unsteady Panel Method, 20th European Rotorcraft Forum, Amsterdam, The Netherlands, 1994.Google Scholar
16. Kuntz, M., Heinrich, R., Pahlke, K. and Raddatz, J. Unsteady Rotor Aerodynamics and Acoustics, 23rd European Rotorcraft Forum, 16-18.9.1997, Dresden, Germany, 1997.Google Scholar
17. Ffowcs WilliAms, J. and Hawkings, D. Sound generation by turbulence and surfaces in arbitrary motion, A264, 1969, pp 321342.Google Scholar
18. Brentner, K. and Farassat, F. An analytical comparison of the acoustic analogy and kirchhoff formulation for moving surfaces, AIAA J, 36, (8), 1998, pp 13791386.Google Scholar
19. Stuermer, A. and Yin, J. Installation impact on pusher CROR engine low speed performance and noise emission characteristics, Int J Engineering Systems Modeling and Simulation, 2012, 4, (1-2), pp 5968.Google Scholar
20. Brandvik, C.A., Hall, A.B. and Parry, A.B. Angle-of-Attack Effects on Counter-Rotating Propellers at Take-Off, GT2012-69901, ASME Turbo Expo 2012, Copenhagen, Denmark, June 2012.Google Scholar
21. Yin, J. and Buchholz, H. Toward noise abatement fight procedure design: DLR rotorcraft noise ground footprints model, J American Helicopter Society, 2007, 52, pp 9098.Google Scholar