Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T15:14:06.440Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of aerofoil section dynamic stall synthesis methods in rotor design

Published online by Cambridge University Press:  27 January 2016

W. Chan  and
J. Perry
W. Chan*
Affiliation:
Aeroelastic Consultant, Yeovil, UK
J. Perry
Affiliation:
Rotorcraft Consultant, Yeovil, UK
*
wayland.chan@yahoo.co.uk
Get access Rights & Permissions [Opens in a new window]

Abstract

The introduction of the original time delay method of Beddoes, an engineering model for the unsteady response of an aerofoil section including dynamic stall, had a profound effect on the design and development of rotor systems in the UK. Over the years, the model expanded to include more and more features of the unsteady flow, with many contributors. It is now in use throughout the world as part of rotor analysis packages. Nevertheless, it retains its essential simplicity. Work to confirm the ability of the most recent version of the dynamic stall model from the University of Glasgow to replicate the complicated behaviour of an advanced rotor aerofoil section at full scale Reynolds and Mach numbers provides an opportunity to review the use of this new engineering model in the helicopter rotor design environment.

This note discusses the application of dynamic stall synthesis methods to the problem of classifying and comparing aerofoil sections when designing rotors for the retreating blade stall condition that determines the rotor blade area requirement of the helicopter. The development of the dynamic stall models employed in UK rotor designs is reviewed in this paper and their use in the design process explained, with emphasis on the assumptions that overcome the limitations of the models and exploit their simplicity, enabling accurate and conservative rotor designs. The paper shows how the model may be used to structure the analysis of complex sets of dynamic aerofoil data. It illustrates how structured comparison between the model and the data yields a concise appreciation of the behaviour of the aerofoil and an understanding of the physical processes involved. Some previously unappreciated effects are identified and the model is used to transfer experience of the aerofoil section behaviour from the non-rotating wind-tunnel environment to that of the rotor. Finally, the application of the new engineering model developed at Glasgow University in the rotor design process is outlined. Some remarks on the use of engineering models in comparison with CFD models in the design context are included.

Type
Research Article
Information
The Aeronautical Journal , Volume 116 , Issue 1179 , May 2012 , pp. 501 - 520
Copyright
Copyright © Royal Aeronautical Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Beddoes, T.S. A Synthesis of Unsteady Aerodynamic Effects Including Stall Hysteresis European Rotorcraft and Powered Lift Forum Southampton, 1975.Google Scholar
2. Beddoes, T.S. Retreating Blade Stall Flutter ARC 36966, Aerodynamics 1976.Google Scholar
3. Brotherhood, P. and Reilly, M.J. Flight experiments on aerodynamic features affecting helicopter blade design, Vertica, 1978, 2, pp 27–42.Google Scholar
4. Wilby, P.G. The Development of Rotor Aerofoil Testing in the UK – The Creation of a Capability to Exploit a Design Opportunity European Rotorcraft Forum, Brighton, UK, 1996.Google Scholar
5. Liiva, J, Davenport, F.J., Gray, L. and Walton, I.C. Two-dimensional Tests of Airfoils Oscillating Near Stall USAAVLABS TR68-13, 1 and 2, 1968 Google Scholar
6. Beddoes, T.S. Onset of Leading Edge Separation Effects Under Dynamic Conditions and Low Mach Number AHS Annual National Forum, Washington, USA, May 1978.Google Scholar
7. Beddoes, T.S. Representation of aerofoil behaviour, Vertica, 1983, 7, (2), pp 183–187.Google Scholar
8. Abbot, I.H. and von Doenhoff, A.E. Theory of Wing Sections, Dover Publications New York, USA, 1959.Google Scholar
9. Theodorsen, T, General Theory of Aerodynamic Instability and the Mechanism of Flutter NACA Report 496 1935.Google Scholar
10. Evans, W.T. and Mort, K.W. Analysis of computed flow parameters for a set of sudden stalls in low speed two-dimensional flow NASA TND–85, 1959.Google Scholar
11. Wilby, P.G. The calculation of sub-critical pressure distributions on symmetric aerofoils at zero incidence NPL Aero Report 1208, 1967.Google Scholar
12. Sheng, W., Galbraith, R.A.McD, and Coton, F.N. A new stall-onset criterion for low speed dynamic stall, J Solar Engineering, 2006, 128, pp 461–471.Google Scholar
13. Corten, G.P. Inviscid stall model EWEC 2001, Copenhagen, Denmark, PG2.27.Google Scholar
14. Beddoes, T.S. Practical computation of unsteady lift, Vertica, 1984, pp 55–71, 8, (1).Google Scholar
15. Humphreys, C. Results of Oscillatory Pitch, Ramp and Drag Tests on the RAE 9651 Section Aircraft Research Association Ltd Model Test Note M161/2 (No date – Tests January-March 1983).Google Scholar