The adsorption of Cu2+ on kaolinite was studied at different ionic strengths following various treatments of the mineral surface in order to evaluate the conditions influencing adsorption. The data indicate a strong preference of the Na+ exchange form of kaolinite for Cu2+ but a weak affinity of the natural kaolinite for Cu2+. Protons are generated by Cu2+ adsorption, a result of the exchange of surface protons, and possibly the enhancement of Cu2+ hydrolysis at the kaolinite surfaces. The exchange of Na+ by Cu2+ on the kaolinite is not described by the mass-action equation, but can be interpreted in terms of permanent charge sites on the surfaces when the additional factors of Na+-H3O+ exchange and blockage of sites by Al ions are considered.

Dehydroxylated sericites were stirred in the various salt solutions, or washed several times with various salt solutions using a centrifuge. By these treatments a seriate of the 2M type was easily transformed into an interstratified mineral of the rectorite type when a sericite was treated with sodium salts, and random mixed-layer mineral was formed from 1M sericite. The formation of a rectorite-type mixed-layer mineral from 2M sericite can be explained by the (OH) bond direction after the extraction of the potassium ions.

The exchange of various alkylammonium cations from aqueous solution by sodium laponite has been studied. The affinity of the clay for these organic cations was linearly related to the molecular weight, molecular size or chain length of the alkylammonium ions. The affinity for the clay increases regularly with increasing chain length of the primary amines. A comparison of primary, secondary, and tertiary amines, containing the same alkylgroups shows that the affinity increases in the order R1NH3+ < R2NH2+ < R3NH+. These affinity sequences were attributed to important van der Waals contributions and changes in ion hydration states. The thermodynamic excess function, ΔGmE, was calculated and indicated that with respect to the pure homoionic forms the heterogeneous Na+-alkylammonium surface phases were more stable than they would be if the mixing were ideal.

Kaolinite is synthesized in approximately the same time in three temperature ranges: (1) from 200–250° to 350–400° (hydrothermal processes); (2) from 120 to 175° (semihydrothermal ones); (3) at ordinary temperature. It is thus evident that the rate process cannot be explained by the Arrhenius equation only, but is explained well by considering that kaolinite formation obeys the laws of crystal growth. It occurs only in slightly supersaturated solutions in which the nucleation process is possible and in which a slow and regular rate of growth has been insured. Concentrations calculated from the thermodynamical equilibria correspond to those of the experimental conditions for the low temperature processes. For the higher temperature ones, a similar relationship is delineated, at least as far as the thermodynamical treatment can be carried out.

Smectite (from South Dakota, Wyoming, and Mississippi) and Vermiculite (Transvaal) were treated with solutions of Al(OH)B(3-B)+, with B varying from 0 to 2.5. The average basicity (OH/Al = B) of the Al adsorbed differed very much from the basicity of the Al added. The average basicity of the Al adsorbed by smectite was always above the average basicity of the Al added. In contrast to smectite, Vermiculite adsorbed smaller hydroxy-Al complexes. One reason for the different selective behavior was the difference in expansion between smectite (about 18 Å) and vermiculite (about 14 Å). Because of the adsorption of the relatively more basic OH-Al by smectite, smectite adsorbed considerably more Al than vermiculite. The total amount of aluminum in the interlayer generally could not be calculated by the difference between Al added and that remaining in solution after the reaction because of possible protonation of the clay mineral and adsorption of structural Al and other cations, which is more pronounced for vermiculite. The results in the present study demonstrated that neither the quantitative nor the qualitative composition of an Al(OH)B-treated exchanger can be deduced from B of the Al salts added. These points are frequently overlooked when cation exchangers are pretreated with Al of variable basicity and are used for further investigations, such as studies of CEC, surface area, interlayer spacing, anion reactions, the formation of gibbsite, etc. Before these kinds of investigations are conducted employing the pretreated OH-Al-exchangers, their composition should be known precisely.

A stable porous system consisting of montmorillonite cross-linked by Al-hydroxide oligomers was synthesized by reacting at room temperature an aqueous solution of such oligomers with a unit-layer dispersion of montmorillonite. The resulting cross-linked montmorillonite (Al-CLM) is a nonswelling material, showing basal spacings of 14.4 to 18.8 Å after air drying and between 14.2 to 18.0 Å after treatment at 110°C. The basal spacing is found to depend on the age and OH/Al ratio of the Al-hydroxide solution, as well as on the relative amounts of the two reactants. A specific surface area of 160 m2/g and a diffraction pattern with a dominant basal spacing of 17.5 Å is obtained by using Al-hydroxide with OH/Al = 1.85, aged for at least 5 days, and by applying an Al/montmorillonite ratio greater than 1.5 in the cross-linking process. The basal spacing of Al-CLM remains essentially unchanged after heating at 220°C, while the specific surface area is not affected by heat treatment up to 480°C.

Two possible configurations of Al-hydroxide oligomers, homogeneously distributed between parallel montmorillonite unit-layers, were considered in order to account for the basal spacing of 17.5–18.8 Å, viz. (a) stacking of two oligomeric ring units in parallel orientation relative to the clay lamellae and (b) perpendicular orientation of individual oligomeric units.

The reaction of phlogopite with a trimethylsilylating reagent yielded organosilicate compounds which are soluble in various organic solvents. Gas chromatographic analysis of the soluble products indicates that they consist of the trimethylsilylated derivatives of silicic acids which have been formed in the decomposition of phlogopite by hydrochloric acid and that silicic acids formed by the acid attack are monomelic and also oligomeric. The increase of the ratio of GC peak areas of monomer derivative to dimer one with an increase of the reaction time shows that silicic acids in the reaction system tend to depolymerize. The difference between phlogopite and biotite in the ease of trimethylsilylation also is discussed.

Oxidation of acetaldehyde molecules adsorbed on Na- and Mg-Wyoming montmorillonite at room temperature (20-25°C) and in N2 atmosphere has been studied by I.R. spectroscopy, A comparison between clay-acetic acid complex and that prepared from acetaldehyde is given. The influence of the nature of the saturating cation as well as the clay pretreatment on this oxidation process are discussed and reaction pathways are proposed. Acetic acid directly adsorbed on the clay surface is almost removed at 110°C, while that produced from the oxidation of the adsorbed acetaldehyde appears to be strongly held. Within a temperature range 180-230°C, the fixed acetic acid molecules dissociate to acetate form; then occurs an interaction of the acetate and the residual acid with the lattice OH of the clay at 200–300°C. This interaction involves the loss of the structural OH and deposition of carbon on the clay surfaces. The thermal decomposition of the residual complex is almost completed at 500–600°C

From swelling and surface area measurements, it was found that the swelling of a montmorillonite depends linearly on the fraction of its layers that fully expand in water and that this fraction, in turn, depends linearly on the b dimension of the unit cell. Therefore, swelling is a linear function of the b dimension. However, the specific surface area of a montmorillonite is a linear function of its b dimension only if no partially expanded layers exist. It was also found that the distance between fully expanded layers at a given applied pressure is the same for all montmorillonites.

Analytical data from aqueous dissolution studies of minerals, mineral systems, and naturally equilibrated solutions such as surface waters and groundwaters provide the basic ingredients necessary to calculate comparative solubility (or activity) products (CKs) and comparative free energies of formation (CΔGf0) of possible minerals or hypothetical minerals. Using a thermodynamic approach, quasi-thermodynamic values are obtained which can help in understanding the relative stabilities of different but similar materials and changes in reacting systems. Illite equilibrated solutions demonstrated that: 1) there is a 5 kcal spread in comparative free energies of formation of the five illites used, 2) the comparative stabilities remain about the same when highly simplified but similar hypothetical mineral formulas are considered, and 3) some of these illites are probably not the most stable phase in a closed chemical system at standard temperature and pressure.

A “mineral index system” composed of common rock-forming minerals, products of chemical weathering and perhaps hypothetical minerals is proposed, which offers a means of studying naturally equilibrated solutions. Such a system can show changes with respect to CΔGf0 of these minerals at a particular site through time or in relationship to spatial distribution and geologic changes through synchronous sampling at different sites.

Clay minerals were used as indicators for determining the source of sediment in recently dredged harbors along the north shore of Long Island Sound. Amount and characteristics of clay minerals in sediments from the dredged channels were compared to their amount and characteristics in the surrounding soils and in sediments from Long Island Sound. Clay minerals in sediments from the channels were similar in amount and characteristics to clay minerals in sediments from Long Island Sound but differed from those in the surrounding soils in the watershed. Thus, the main source of deposits in the channels is the bottom sediment of Long Island Sound which is transported to the channels by tidal action. These conclusions are supported by recent studies of the bottom currents in the Sound.

Morphological changes occurring in naturally weathered micas in seven residual soils from Ontario were studied. Splitting, exfoliation of the (100) planes, surface coats, filling of spaces with soil material as well as cracking and crumbling of (001) surfaces were the main morphological changes found to be taking place during natural weathering of mica particles. The significance of the observed feature in relation to the general theory of mica weathering is discussed.

Cross-linking of Li-montmorillonite by hydroxy-aluminum oligomers was performed in a specially constructed mixing apparatus. Observations on flocculation and solution composition were carried out during and after the cross-linking reaction; the dry product was studied by scanning electron microscopy.

Flocculation was most pronounced at Al/montmorillonite ratios between 0.98 and 2.45 mM/g; below and above this range, flocculation was much less intensive. These observations can be explained by heterocoagulation and protecting colloid action. A complete neutralization of the montmorillonite charge was estimated at 1.9 mM adsorbed Al per g clay, and in order to account for the electrical charge of the hydroxy-Al, polymers with an average charge of 0.5 per Al atom must be assumed on the montmorillonite surface. Assuming that the hydroxy-aluminum form in the unreacted solution is Al6(OH)3+12, the adsorbed polymer will be Al24(OH)12+60. Alternatively, assuming Al6(OH)3+15 in the unreacted solution, this form will remain unchanged upon adsorption onto the montmorillonite surface.

Differences in the microfabric of dry Al-CLM as a function of Al/montmorillonite ratio can be explained along the lines of the interpretation of the flocculation studies.

A technique suitable for computer application has been developed whereby whole rock major element analyses are corrected for X-ray detectable nonclay minerals and used to set up simultaneous equations which are solved to give clay mineral abundances. A theoretical evaluation of the approach by graphical methods enables the intrinsic errors to be very clearly assessed. Errors are minimized when SiO2, A12O3, and K2O are used as variables but only slightly increased if total Fe2O3 + MgO is substituted for SiO2. Quartz and CO2 content are the only data normally required which cannot be determined by X-ray fluorescence.

Results compare favorably with estimates obtained by XRD and other methods, being more accurate than XRD and equally precise provided the rock does not contain clay minerals other than the kaolin group, the mica group, and chlorite. Errors are large when the clay mineral phases comprise more than 35% chlorite and as yet undetermined when smectite exceeds 10%.

The method is ideally suited to the analysis of large numbers of mudstones of fairly similar mineralogy especially where XRF equipment with direct output to a computer is available.

The recent determination of the three-dimensional crystal structure of a dickite:formamide intercalate allows insight into the clay:organic bonding schemes of amides and other small organic molecule intercalates of the kaolin minerals. It is demonstrated that the observed basal spacings of intercalates with these molecules are consistent with hydrogen bonding schemes in which, if possible, triple hydrogen bonds from the clay hydroxyls to 0=C< are formed. Variations in basal spacing within a series of amides can be explained by considering the maximization of hydrogen bonding while avoiding close van der Waals contacts.

Using a simple ionic model, the energy necessary to expand a layer structure by a certain distance can be calculated. This has been done for a series of 15 structures including hydroxides, 2:1 and 1:1 structures of various types. Plots of energy versus separation distance show three major groups which have common bonding properties. For large separations, the group with the strongest interlayer bonds contains the brittle micas, the hydroxides, and the 1:1 structures. Intermediate bonding structures are the normal micas and the weakest bonds occur in the zero layer charge 2:1 structures. The relative energies needed for a given separation are not constant so that for small separations the zero layer charge structures such as talc and pyrophyllite are more strongly bonded than the normal micas. These groupings correlate very well with the expandability of the structures by water and other substances. It is proposed that this approach to the study of the layer structures will provide a simple theory explaining the expansion properties of layer silicates.

Low albite and maximum microcline were the two feldspars identified in Coal Measures mudrocks. Standard feldspars were then used to spike a mudrock base to construct standard working curves based on X-ray powder diffraction peak areas. Boehmite was added as an internal standard and also to correct for orientation effects. The samples were ignited at 950°C before the addition of the internal standard. This is advantageous for several reasons, but a disadvantage is that albite was found to undergo partial conversion to K-feldspar. The conversion was not total and the original albite content could be determined. This method is an extension of an existing method for quartz and therefore feldspars and quartz can be determined simultaneously.

X-ray superlattice reflections, infrared spectroscopy, and chemical analyses have established that cetylpyridinium bromide (CPB) is highly ordered when adsorbed on vermiculite. The molecules, which stand at about 57° to the silicate surface, form close-packed arrays. Full surface coverage is achieved only for the most highly charged vermiculites. The packing within the arrays accounted for the superlattice observed and each adsorbed molecule had an area of 18.4 Å2 at the surface. The implications of these findings for the CPB method used in soil surface area studies are discussed.

Four sepiolite deposits of different origin, which occur near Las Vegas, Nevada, are compared and described. They include a playa deposit, a valley terrace deposit, and two types of vein deposits. The physical and chemical characteristics of the four materials are described, the engineering and commercial features are considered, and the varied origins of the sepiolite are discussed. X-ray powder diffraction data, infrared spectra, thermal characteristics, and chemical analyses are given for the Two Crows sepiolite. The vein deposit is proposed for use as a clay mineral reference standard because of its purity and availability. The apparent diverse morphology of the sepiolite deposits is shown with its common, lathlike basic structure.

X-ray intensity ratios of Si/Al, Si/Fe, and Al/Fe in micron-sized particles of geochemical standards were found to vary linearly with the composition ratio. The same linear relationship was found for samples of the clay minerals kaolinite and illite.