Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-27T05:19:22.347Z Has data issue: false hasContentIssue false
  • English
  • Français

The metrological approach: a major key factor for the accreditation and continuous improvementof the wood preservation laboratory of Cirad

Published online by Cambridge University Press:  07 November 2013

L. Martin ,
Ch. Baudassé ,
N. Leménager  and
M.-F. Thévenon
Get access

Abstract

Since 2006, the wood preservation laboratory of Cirad is accredited by COFRAC (French accreditation committee – accreditation No. 1-1686) for tests on the durability of wood and wood-based products and on protective efficacy of wood preservatives and termite control products. The metrological approach adopted by the wood preservation laboratory is a key factor on the continuous improvement of practices. Tests to determine the resistance against wood-destroying biological agents are the most difficult of all wood analysis tests. They are aimed at assessing and quantifying the impact of living organism, such as fungi and termites, on a lignocellulosic material. The extent of variability of this impact, which in turn is linked with the diversity of these organisms and of the material, can be readily determined. The validity and reliability of the findings therefore depend directly on the quality of the metrological process, including the choice of measurement devices, their management and compliance with international standards.

Keywords

Metrologyaccreditationtraceabilityuncertaintybiological tests
Type
Research Article
Information
International Journal of Metrology and Quality Engineering , Volume 4 , Issue 2 , 2013 , pp. 117 - 120
Copyright
© EDP Sciences 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (2005)
NF EN 113, Wood preservatives – Test method for determining the protective effectiveness against wood destroying basidiomycetes – Determination of the toxic values (1996)
XP ENV 12038, Durability of wood and wood-based products – Wood-based panels – Method of test for determining the resistance against wood-destroying basidiomycetes (2003)
NF EN 117, Wood preservatives – Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) (2005)
NF EN 118, Wood preservatives – Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) (2005)
EN 73, Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Evaporative ageing procedure (1988)
EN 84, Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Leaching procedure (1997)
XP X 41-550, Termites – Determination of the effectiveness against termites of products or material used as barrier designed for ground and/od wall (Laboratory method) (2009)
XP X 41-542, Wood preservatives – Anti-termites treatment product for floors, walls, foundations and masonry work – Accelerated ageing test of treated materials prior to biological testing (Percolation test) (1995)
ISO 5725-2, Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (1994)
NF ENV 13005, Guide to the expression of uncertainty in measurement (1999)