Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-11T07:42:13.040Z Has data issue: false hasContentIssue false
  • English
  • Français

MEMS reconfigurable millimeter-wave surface for V-band rectangular-waveguide switch

Published online by Cambridge University Press:  23 April 2013

Zargham Baghchehsaraei ,
Umer Shah ,
Jan Åberg ,
Göran Stemme  and
Joachim Oberhammer
Zargham Baghchehsaraei*
Affiliation:
Micro and Nanosystems, School of Electrical Engineering, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden
Umer Shah
Affiliation:
Micro and Nanosystems, School of Electrical Engineering, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden
Jan Åberg
Affiliation:
MicroComp Nordic, Friparksvägen 3, 146 38 Tullinge, Sweden
Göran Stemme
Affiliation:
Micro and Nanosystems, School of Electrical Engineering, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden
Joachim Oberhammer
Affiliation:
Micro and Nanosystems, School of Electrical Engineering, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden
*
Corresponding author: Z. Baghchehsaraei Email: zargham@kth.se
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents for the first time a novel concept of a microelectromechanical systems (MEMS) waveguide switch based on a reconfigurable surface, whose working principle is to block the wave propagation by short-circuiting the electrical field lines of the TE10 mode of a WR-12 rectangular waveguide. The reconfigurable surface is only 30 µm thick and consists of up to 1260 micromachined cantilevers and 660 contact points in the waveguide cross-section, which are moved simultaneously by integrated MEMS comb-drive actuators. Measurements of fabricated prototypes show that the devices are blocking wave propagation in the OFF-state with over 30 dB isolation for all designs, and allow for transmission of less than 0.65 dB insertion loss for the best design in the ON-state for 60–70 GHz. Furthermore, the paper investigates the integration of such microchips into WR-12 waveguides, which is facilitated by tailor-made waveguide flanges and compliant, conductive-polymer interposer sheets. It is demonstrated by reference measurements where the measured insertion loss of the switches is mainly attributed to the chip-to-waveguide assembly. For the first prototypes of this novel MEMS microwave device concept, the comb-drive actuators did not function properly due to poor fabrication yield. Therefore, for measuring the OFF-state, the devices were fixated mechanically.

Keywords

RF-MEMS and MOEMSPassive components and circuits
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 5 , Special Issue 3: European Microwave Week 2012 , June 2013 , pp. 341 - 349
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Kich, R.; Ando, M.N.: Compact waveguide “T” switch, U.S. Patent 6 201 906 B1, March 13, 2001.Google Scholar
[2]Henry, R.; Heitzmann, M.; Sillard, G.: PIN diode switch mounted in a ridge waveguide, U.S. Patent 4 660 008, April 21, 1987.Google Scholar
[3]Craven, G.F.: Waveguide switch, U.S. Patent 3 979 703, September 7, 1977.Google Scholar
[4]Rebeiz, G.M.: RF MEMS: Theory, Design, and Technology, John Wiley & Sons Inc., New York, Ny, USA, 2003.Google Scholar
[5]Yao, J.J.: RF MEMS from a device perspective. J. Micromech. Microeng., 10 (2000), R9–R38.CrossRefGoogle Scholar
[6]Lucyszyn, S.: Review of radio frequency microelectromechanical systems technology. IEE Proc., Sci. Meas. Technol., 151 (2004), 93–103.Google Scholar
[7]Rebeiz, G.M.; Muldavin, J.B.: RF MEMS switches and switch circuits. IEEE Microw. Mag., 2 (2001), 59–71.Google Scholar
[8]Brown, E.R.: RF-MEMS switches for reconfigurable integrated circuits. IEEE Trans. Microw. Theory Tech., 46 (1998), 1868–1880.Google Scholar
[9]Oberhammer, J.; Stemme, G.: Active opening force and passive contact force electrostatic switches for soft metal contact materials. Int. J. Microelectromech. Syst., 15 (2006), 1235–1242.Google Scholar
[10]Liu, A.Q.; Tang, M.; Agarwal, A.; Alphones, A.: Low-loss lateral micromachined switches for high frequency applications. J. Micromech. Microeng., 15 (2005), 157–167.Google Scholar
[11]Mahameed, R.; Rebeiz, G.M.: RF MEMS capacitive switches for wide temperature range applications using a standard thin-film process. IEEE Trans. Microw. Theory Tech., 59 (2011), 1746–1752.Google Scholar
[12]Nieminen, H.; Ermolov, V.; Nybergh, K.; Silanto, S.; Ryhänen, T.: Microelectromechanical capacitors for RF applications. J. Micromech. Microeng., 12 (2002), 177–186.Google Scholar
[13]Dec, A.; Suyama, K.: Micromachined electro-mechanically tunable capacitors and their applications to RF IC's. IEEE Trans. Microw. Theory Tech., 46 (1998), 2587–2596.Google Scholar
[14]Borwick, R.L. III.; Stupar, P.A.; DeNatale, J.; Anderson, R.; Tsai, C.; Garrett, K.; Erlandson, R.: A high Q, large tuning range MEMS capacitor for RF filter systems. Sens. Actuators A, Phys., 103 (2003), 33–41.Google Scholar
[15]Lakshminarayanan, B.; Weller, T.M.: Optimization and implementation of impedance-matched true-time-delay phase shifters on quartz substrate. IEEE Trans. Microw. Theory Tech., 55 (2007), 335–342.Google Scholar
[16]Hung, J.-J.; Dussopt, L.; Rebeiz, G.M.: Distributed 2- and 3-bit W-band MEMS phase shifters on glass substrates. IEEE Trans. Microw. Theory Tech., 52 (2004), 600–606.Google Scholar
[17]Somjit, N.; Stemme, G.; Oberhammer, J.: Binary-coded 4.25-bit W-band monocrystalline–silicon MEMS multistage dielectric-block phase shifters. IEEE Trans. Microw. Theory Tech., 57 (2009), 2834–2840.Google Scholar
[18]Jiang, H.; Wang, Y.; Yeh, J.-L.A.; Tien, N.C.: On-chip spiral inductors suspended over deep copper-lined cavities. IEEE Trans. Microw. Theory Tech., 48 (2000), 2415–2423.Google Scholar
[19]Herrick, K.J.; Schwarz, T.A.; Katehi, L.P.B.: Si-micromachined coplanar waveguides for use in high-frequency circuits. IEEE Trans. Microw. Theory Tech., 46 (1998), 762–768.CrossRefGoogle Scholar
[20]Hong-Teuk, K.; Sanghwa, J.; Jae-Hyoung, P.; Chang-Wook, B.; Yong-Kweon, K.; Youngwoo, K.: A new micromachined overlay CPW structure with low attenuation over wide impedance ranges and its application to low-pass filters. IEEE Trans. Microw. Theory Tech., 49 (2001), 1634–1639.Google Scholar
[21]Daneshmand, M.; Mansour, R.R.; Sarkar, N.: RF MEMS waveguide switch. IEEE Trans. Microw. Theory Tech., 12 (2004), 2651–2657.Google Scholar
[22]Legtenberg, R.; Groeneveld, A.W.; Elwenspoek, M.: Comb-drive actuators for large displacements. J. Micromech. Microeng., 6 (1996), 320–329.CrossRefGoogle Scholar
[23]Hou, M.T.-K.; Huang, G.K.-W.; Huang, J.-Y.; Liao, K.-M.; Chen, R.; Yeh, J.-L.A.: Extending displacements of comb drive actuators by adding secondary comb electrodes. J. Micromech. Microeng., 16 (2006), 684–691.Google Scholar
[24]Sterner, M.; Roxhed, N.; Stemme, G.; Oberhammer, j.: Static zero-power-consumption coplanar waveguide embedded DC-to-RF metal-contact MEMS switches in two-port and three-port configuration. IEEE Trans. Electron Devices, 7 (2010), 1659–1669.CrossRefGoogle Scholar