Published online by Cambridge University Press: 13 September 2018
The ultra-wideband bandpass-response power divider with high-frequency selectivity is presented in this paper. This power divider consists of an impedance transformer, a filter network, and two isolation resistors. In order to realize the ultra-wideband filtering performance, parallel coupling lines and parallel open-circuit branches are applied to the second impedance converter. A resistor is added to the ends of the coupling lines to achieve good isolation and output return loss. The equivalent-circuit method is employed to analyze the presented power divider. The power divider, working at 3.45–8.29 GHz, is designed and fabricated. Two transmission zeros are generated at 2.8 and 9 GHz, respectively, and the out-of-band suppression is >13 dB. The measured results are in good agreement with the simulation ones.