Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-27T12:20:56.407Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental verification of super-compact ultra-wideband (UWB) polarization and incident angle-independent metamaterial absorber

Published online by Cambridge University Press:  15 September 2020

Manpreet Kaur  and
Hari Shankar Singh Open the ORCID record for Hari Shankar Singh [Opens in a new window]
Manpreet Kaur
Affiliation:
Department of Electronics and Communication Engineering, Thapar Institute of Engineering and Technology, Patiala147 004, Punjab, India
Hari Shankar Singh*
Affiliation:
Department of Electronics and Communication Engineering, Thapar Institute of Engineering and Technology, Patiala147 004, Punjab, India
*
Author for correspondence: Hari Shankar Singh, E-mail: harishankar1990@gmail.com
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper, a super-compact ultra-wideband (UWB) metamaterial absorber (MMA) is presented. The absorber design consists of an inverted L-shaped structure and a diagonal rectangular-shaped structure. The capacitive coupling between these two structures not only provides UWB nature but also provides a super-compact absorber design. The dimension of the unit cell arrangement is 5 × 5 mm2 and printed on a low-cost FR-4 substrate of thickness 1.54 mm (0.061λlowest). The design absorber provides more than 97% absorptivity from 12 to 21 GHz for normal incidence electromagnetic (EM) wave. However, the proposed MMA has a full width at half maximum absorption bandwidth of 11.71 GHz from 10.34 to 22.05 GHz. Moreover, the surface current distributions have been analyzed to understand the absorption mechanism of the MMA. The stability of the proposed design is validated with different incident angles (for TE and TM modes) and different polarization angles. Finally, the absorber design is fabricated and verified experimentally. Furthermore, the UWB frequency range, high absorption, ease in design and fabrication, and cost-effective make it suitable for different quality applications in stealth technology, thermal imaging, radar detection, antenna systems, and other EM devices.

Keywords

Meta-materialsradar applicationsultra-wideband
Type
Metamaterials and Photonic Bandgap Structures
Information
International Journal of Microwave and Wireless Technologies , Volume 13 , Issue 8 , October 2021 , pp. 789 - 799
Check for updates
Copyright
Copyright © The Author(s), 2020. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Smith, DR, Padilla, WJ and Vier, DC (2000) Composite medium with simultaneously negative permeability and permittivity. Physical Review Letters 84, 4184–4187.CrossRefGoogle ScholarPubMed
Fang, N, Lee, H, Sun, C and Zhang, X (2005) Sub-diffraction-limited optical imaging with a silver superlens. Science (New York, N.Y.) 308, 534–537.CrossRefGoogle ScholarPubMed
Schurig, D, Mock, JJ, Justice, BJ, Cummer, SA, Pendry, JB, Starr, AF and Smith, DR (2006) Metamaterial electromagnetic cloak at microwave frequencies. Science (New York, N.Y.) 314, 977–980.CrossRefGoogle ScholarPubMed
Landy, NI, Sajuyigbe, S and Mock, JJ (2008) Perfect metamaterial absorber. Physical Review Letters 100, 207402, (1–4).CrossRefGoogle ScholarPubMed
Erentok, A and Ziolkowski, RW (2008) Metamaterial-inspired efficient electrically small antennas. IEEE Transactions on Antennas and Propagation 56, 691–707.CrossRefGoogle Scholar
Chaimool, S, Chung, KL and Akkaraekthalin, P (2009) A 2.45-GHz WLAN high-gain antenna using a metamaterial reflecting surface. The International Symposium on Antennas and Propagation (ISAP), October 20–23, Bangkok, Thailand, pp. 325–328.Google Scholar
Chung, KL and Kharkovsky, S (2013) Metasurface-loaded circularly-polarised slot antenna with high front-to-back ratio. Electronics Letters 49, 979–981.CrossRefGoogle Scholar
Jiang, J, Xia, Y and Li, Y (2019) High isolated X-band MIMO array using novel wheel-like metamaterial decoupling structure. ACES Journal 34, 1829–1836.Google Scholar
Bhattacharyya, S, Ghosh, S, Chaurasiya, D and Srivastava, KV (2014) A broadband wide angle metamaterial absorber for defense applications. IEEE International Microwave and RF Conference (IMaRC), 33–36.CrossRefGoogle Scholar
Wang, BY, Liu, SB, Bian, BR, Mao, ZW, Liu, XC, Ma, B and Chen, L (2014) A novel ultrathin and broadband microwave metamaterial absorber. Journal of Applied Physics 116, 094504, (1–7).CrossRefGoogle Scholar
Li, S, Guo, J, Cao, X, Li, W, Zhang, Z and Zhang, D (2014) Wideband, thin, and polarization-insensitive perfect absorber based on the double octagonal rings metamaterials and lumped resistances. Journal of Applied Physics 116, 043710.CrossRefGoogle Scholar
Yuan, W and Cheng, Y (2014) Low-frequency and broadband metamaterial absorber based on lumped elements: design, characterization and experiment. Applied Physics A, Materials Science & Processing 117, 1915–1921.CrossRefGoogle Scholar
Sood, D and Tripathi, CC (2015) A wideband wide-angle ultra-thin metamaterial microwave absorber. Progress in Electromagnetics Research M 44, 39–46.CrossRefGoogle Scholar
Sekar, R and Inabathini, SR (2018) An ultra-thin compact wideband metamaterial absorber. Radio Engineering 27, 364–372.Google Scholar
Barde, C, Choubey, A and Sinha, R (2019) A set square design metamaterial absorber for X-band applications. Journal of Electromagnetic Waves and Applications 34, 1430–1443.CrossRefGoogle Scholar
Ranjan, P, Choubey, A, Mahto, SK, Sinha, R and Barde, C (2019) A novel ultrathin wideband metamaterial absorber for X-band applications. Journal of Electromagnetic Waves and Applications 33, 2341–2353.CrossRefGoogle Scholar
Wang, Q and Cheng, Y (2020) Compact and low-frequency broadband microwave metamaterial absorber based on meander wire structure loaded resistors. International Journal of Electronics and Communications (AEÜ) 120, 153198, (1–8).CrossRefGoogle Scholar
Wu, X, Li, Y and Liu, X (2019) High-order dual-port quasi-absorptive microstrip coupled-line bandpass filters. IEEE Transactions on Microwave Theory and Techniques, 1–14. Doi: 10.1109/TMTT.2019.2955692.Google Scholar
Jeong, SW, Lee, TH and Lee, J (2019) Frequency- and bandwidth-tunable absorptive bandpass filter. IEEE Transactions on Microwave Theory and Techniques 67, 2172–2180.CrossRefGoogle Scholar
CST Microwave Studio available, http://www.cst.com.Google Scholar
Mishra, N, Kumari, K and Chaudhary, RK (2018) An ultra-thin polarization independent quad-band microwave absorber-based on compact metamaterial structures for EMI/EMC applications. International Journal of Microwave and Wireless Technologies 10, 422–429.CrossRefGoogle Scholar
Kruger, F and Scheidl, S (2003) Spin dynamics of stripes. Physical Review B 67, 134512, (1–11).CrossRefGoogle Scholar
Kalraiya, S, Chaudhary, RK, Abdalla, MA and Gangwar, RK (2019) Polarization and incident angle independent metasurface absorber for X-band application. Material Research Express 6, 045802, (1–8).CrossRefGoogle Scholar
Zhao, J and Cheng, Y (2016) A high-efficiency and broadband reflective 90° linear polarization rotator based on anisotropic metamaterial. Applied Physics B: Photophysics and Laser Chemistry 255, 1–7.Google Scholar
Wanghuang, T, Chen, W, Huang, Y and Wen, G (2013) Analysis of metamaterial absorber in normal and oblique incidence by using interference theory. AIP Advances 3, 102118, (1–3).CrossRefGoogle Scholar