Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-26T07:22:55.846Z Has data issue: false hasContentIssue false
  • English
  • Français

A negative permittivity metamaterial composed of planar resonators with randomly detuned resonant frequencies and randomly distributed in space

Published online by Cambridge University Press:  04 July 2018

Jan Machac Open the ORCID record for Jan Machac [Opens in a new window]
Jan Machac*
Affiliation:
Faculty of Electrical Engineering, Czech Technical University in Prague, Technicka 2, 166 27 Prague 6, Czech Republic
*
Author for correspondence: J. Machac, E-mail: machac@fel.cvut.cz
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper investigates metamaterials composed of resonant particles with negative electric polarizability located in a three-dimensional net. The main problem in fabricating these materials is the spread of the resonant frequencies of particular planar resonators. This spread is caused by the tolerances of the fabrication process for planar resonators. The simulation shows that there is a limit to the dispersion of resonant frequencies that allow the metamaterial to behave as a metamaterial with negative effective permittivity. Two metamaterials with a negative real part of the effective permittivity were designed on the basis of simulations. The first metamaterial has a regular periodic structure. The second is a metamaterial in which the resonant particles are randomly distributed both in space and in orientation, and it offers an isotropic response. This metamaterial was fabricated by inserting planar resonators into plastic shells that can be poured into any volume and ensure a random distribution of the resonant particles in space. The results of the simulations have been verified by measurements.

Keywords

Bandgap structuresEM field theoryMeta-materials and photonic
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 10 , Issue 9 , November 2018 , pp. 1028 - 1034
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Zehentner, J and Machac, J (2008) Widening the negative effective parameter frequency band of resonant SNG metamaterials, PIERS 2008, Progress in Electromagnetics Research Symposium, Hangzhou, China, March 2008, pp. 381–386.Google Scholar
2.Machac, J, Rytir, M, Protiva, P and Zehentner, J (2008) A Double H-Shaped Resonator for an Isotropic ENG Metamaterial, 38th European Microwave Conference, Amsterdam, October 2008, pp. 547–550.Google Scholar
3.Machac, J (2017) Amorphous metamaterial with negative permeability. IEEE Antennas and Wireless Propagation Letters 16, 2138–2141.Google Scholar
4.Zedler, M, Caloz, C and Russer, P (2007) A 3-D isotropic left-handed metamaterial based on the Rotated Transmission-Line Matrix (TLM) scheme. IEEE Transactions on Microwave Theory and Techniques 55, 2930–2941.Google Scholar
5.Sato, Y, Ueda, T, Kado, Y and Itoh, T (2011) Design of isotropic 3-D multilayered CRLH metamaterial structures using conductive mesh plates and dielectric resonators, Asia-Pacific Microwave Conference 2011, Melbourne, Australia, December 2011, pp. 526–529.Google Scholar
6.Sanada, A (2008) A 3D isotropic left-handed metamaterial composed of wired metallic spheres, 2008 IEEE MTT-S International Microwave Symposium Digest, Atlanta, GA, USA, June 2008, pp. 339–342.Google Scholar
7.Selvanayagam, M and Eleftheriades, GV (2013) Dual-Polarized volumetric transmission-line metamaterials. IEEE Transactions on Antennas and Propagation 61, 2550–2560.Google Scholar
8.Baena, JD, Jelinek, L and Marques, R (2007) Towards a systematic design of isotropic bulk magnetic metamaterials using the cubic point groups of symmetry. Physical Review B 76, 245115.Google Scholar
9.Tanaka, T and Ishikawa, A (2014) Fabrication of isotropic infrared metamaterials, 8th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics – Metamaterials 2014, Copenhagen, Denmark, August 2014, pp. 418–420.Google Scholar
10.Wheeler, MS, Aitchison, JS, Chen, JIL, Ozin, GA and Mojahedi, M (2009) Infrared magnetic response in a random silicon carbide micropowder. Physical Review B 79, 073103.Google Scholar
11.Tao, H, Padilla, WJ, Zhang;, X and Averitt, RD (2011) Recent progress in electromagnetic metamaterial devices for terahertz applications. IEEE Journal of Selected Topics in Quantum Electronics 17, 92–101.Google Scholar
12.Machac, J, Protiva, P and Zehentner, J (2007) Isotropic epsilon-negative particles, 2007 IEEE MTT-S International Microwave Symposium, Honolulu, Hi., USA, June, TH4D-03, CD ROM.Google Scholar
13.Imhof, PD, Ziolkowski, RW and Mosig, JR (2006) Highly subwavelength unit cells to achieve epsilon negative (ENG) metamaterial properties, 2006 IEEE Antennas and Propagation Society International Symposium, pp. 1927–1930, DOI: 10.1109/APS.2006.1710951.Google Scholar
14.Tretyakov, S (2003) Analytical Modeling in Applied Electromagnetics. Boston, London: Artech House, Inc.Google Scholar
15.Jackson, JD (1998) Classical Electrodynamics, 3rd Edn., John Wiley & Sons, Inc.Google Scholar
16.Jelinek, L and Machac, J (2014) A polarizability measurement for electrically small particles. IEEE Antennas and Wireless Propagation Letters 13, 1051–1053.Google Scholar