No CrossRef data available.
Reconfigurable diplexer using hybrid couplers and perturbed TE012 cavities
Published online by Cambridge University Press: 19 May 2021
Abstract
A continuously tunable Ku-band waveguide diplexer is proposed in this paper. This diplexer is based on a hybrid coupler topology and is composed of an input filter centered at 11.9 GHz with a 200 MHz bandwidth, a pair of ladder-type hybrid couplers, and a pair of tunable filters. This diplexer can provide two bandpass channels (channels 1 and 2) that can continuously go from a state where the bandwidths of channels 1 and 2 are maximum (up to 140 MHz) and minimum (down to 40 MHz), respectively, to another configuration where the bandwidth of channel 1 is the largest and the bandwidth of channel 2 is the narrowest. We propose a tunable filter based on TE012 mode circular cavities that are perturbed by low-loss dielectric inserts to obtain such performance. The resonant frequency of these cavities can be continuously tuned between 11.8 and 12 GHz due to the linear movement of the dielectric perturber. The design process for these components is presented and a breadboard device has been manufactured and measured to prove the concept. Different measured configurations of the diplexer are demonstrated, showing that the 200 MHz operating bandpass between 11.8 and 12 GHz can be efficiently separated into two tunable channels. The measured bandwidth of channels 1 and 2 in the manufactured diplexer can be tuned from 135 to 40 MHz (and vice versa) while maintaining an average guard band between the channels of approximately 26 ± 7 MHz. The obtained bandwidth tuning ratios are 3.2 for the highest channel and 3.1 for the lowest channel.
- Type
- Research Paper
- Information
- Copyright
- Copyright © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association
References
Ernst, C, Angeletti, P and De Paolis, F (2013) “Needs for bandwidth reconfigurable filter networks for space application”, in 31st AIAA International Communications Satellite Systems Conference, 0 vols, American Institute of Aeronautics and Astronautics.CrossRefGoogle Scholar
Rosenberg, U, Rosowsky, D, Rummer, W and Wolk, D (1988) “Tunable manifold multiplexers - A new possibility for satellite redundancy philosophy”, in 1988 18th European Microwave Conference, pp. 870–875.CrossRefGoogle Scholar
Rosenberg, U, Beyer, R, Krauß, P, Sieverding, T, Papanastasiou, A, Pueyo-Tolosa, M, Martin Iglesias, P and Ernst, C (2016) “Novel remote controlled dual mode filter providing flexible re-allocation of center frequency and bandwidth”, in 2016 IEEE MTT-S International Microwave Symposium (IMS), pp. 1–3.CrossRefGoogle Scholar
Yassini, B, Yu, M, Smith, D and Kellett, S (2009) A Ku -band high-Q tunable filter with stable tuning response. IEEE Transactions on Microwave Theory and Techniques 57, 2948–2957.CrossRefGoogle Scholar
Yassini, B, Yu, M and Keats, B (2012) A Ka-band fully tunable cavity filter. IEEE Transactions on Microwave Theory and Techniques 60, 4002–4012.CrossRefGoogle Scholar
Kunes, MA and Connor, GG (1989) “A digitally controlled tunable high power output filter for space applications”, in 1989 19th European Microwave Conference, pp. 681–686.CrossRefGoogle Scholar
Arnold, C, Parlebas, J and Zwick, T (2014) Reconfigurable waveguide filter with variable bandwidth and center frequency. IEEE Transactions on Microwave Theory and Techniques 62, 1663–1670.CrossRefGoogle Scholar
Arnold, C, Parlebas, J, Meiser, R and Zwick, T (2017) Fully reconfigurable manifold multiplexer. IEEE Transactions on Microwave Theory and Techniques 65, 3885–3891.CrossRefGoogle Scholar
Basavarajappa, G and Mansour, RR (2018) Design methodology of a tunable waveguide filter with a constant absolute bandwidth using a single tuning element. IEEE Transactions on Microwave Theory and Techniques 66, 5632–5639.CrossRefGoogle Scholar
Ossorio, J, Vague, J, Boria, VE and Guglielmi, M (2018) Exploring the tuning range of channel filters for satellite applications using electromagnetic-based computer aided design tools. IEEE Transactions on Microwave Theory and Techniques 66, 717–725.CrossRefGoogle Scholar
Ossorio, J, Boria, VE and Guglielmi, M (2018) “Dielectric tuning screws for microwave filters applications”, 2018 IEEE MTT-S International Microwave Symposium, Philadelphia, PA, pp. 1253–1256, June 2018.Google Scholar
Perigaud, A, Tantot, O, Delhote, N, Verdeyme, S, Bila, S and Baillargeat, D (2018) “Bandpass filter based on skeleton-like monobloc dielectric pucks made by additive manufacturing”, in 2018 48th European Microwave Conference (EuMC), pp. 296–299.CrossRefGoogle Scholar
Nam, S, Lee, B, Kwak, C and Lee, J (2018) A new class of K-band high-Q frequency-tunable circular cavity filter. IEEE Transactions on Microwave Theory and Techniques 66, 1228–1237.CrossRefGoogle Scholar
Lee, B, Nam, S and Lee, J (2019) Bandwidth tuning of resonator filter using reduced number of tunable coupling structures. IEEE Transactions on Microwave Theory and Techniques 67, 1496–1503.CrossRefGoogle Scholar
Rosenberg, U, Beyer, R, Krauß, P, Sieverding, T, Iglesias, PM and Ernst, C (2016) “OMUX approach providing re-configuration of contiguous/non-contiguous channel allocations with variable frequencies and bandwidths”, in 2016 46th European Microwave Conference (EuMC), pp. 536–539.CrossRefGoogle Scholar
Rosenberg, U, Beyer, R, Krauß, P, Sieverding, T, Iglesias, PM and Ernst, C (2016) “Advanced re-configurable DEMUX design providing flexible channel bandwidth re-allocations”, in 2016 46th European Microwave Conference (EuMC), pp. 655–658.CrossRefGoogle Scholar
Cameron, RI and Yu, M (2007) Design of manifold-coupled multiplexers. IEEE Microwave Magazine 8, 46–59.CrossRefGoogle Scholar
Di Marco, D, Drissi, K, Delhote, N, Tantot, O, Geffroy, P-M, Verdeyme, S and Chartier, T (2017) Dielectric properties of alumina doped with TiO2 from 13 to 73 GHz. Journal of the American Ceramic Society 37, 641–646.Google Scholar
Périgaud, A, Tantot, O, Delhote, N, Verdeyme, S, Bila, S, Pacaud, D, Carpentier, L, Puech, J, Lapierre, L and Carayon, G (2017) Continuously tuned Ku-band cavity filter based on dielectric perturbers made by ceramic additive manufacturing for space applications. Proceedings of the IEEE 105, 677–687.CrossRefGoogle Scholar
Cohn, SB and Levy, R (1984) History of microwave passive components with particular attention to directional couplers. IEEE Transactions on Microwave Theory and Techniques 32, 1046–1054.CrossRefGoogle Scholar