Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-27T08:12:24.505Z Has data issue: false hasContentIssue false
  • English
  • Français

Wideband transformer-coupled E-band power amplifier in 90 nm CMOS

Published online by Cambridge University Press:  21 December 2012

Igor Gertman  and
Eran Socher
Igor Gertman
Affiliation:
School of Electrical Engineering, University of Tel-Aviv, Tel Aviv 69978, Israel
Eran Socher*
Affiliation:
School of Electrical Engineering, University of Tel-Aviv, Tel Aviv 69978, Israel
*
Corresponding author: Dr. E. Socher Email: socher@eng.tau.ac.il
Get access Rights & Permissions [Opens in a new window]

Abstract

In this work, the design of the wideband millimeter-wave power amplifier for multiband communication is presented. In order to achieve compact, simple and robust design, a differential cascade transformer-coupled topology is used. The amplifier is implemented in 90 nm low-leakage CMOS technology and achieves 3 dB bandwidth of 8 GHz (from 60 to 68 GHz) and a peak gain of 18 dB. The PO1dB is better than 5 dBm from 58 to 80 GHz, and peak output power is 11.9 dBm with 1 dB flatness from 62 to 77 GHz. The chip consumes an area of 0.25 mm2 including bond pads and DC current of 125 mA from a 2.2 V supply.

Keywords

CMOSPower amplifierE-bandV-bandTransformer couplingCascadeDifferential
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 5 , Special Issue 1: Special Issue on the German RoCC Project , February 2013 , pp. 71 - 75
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1]RF and A/MS Technologies for Wireless Technologies, ITRS Roadmap., available at: http://www.itrs.net/.Google Scholar
[2]Jiashu, C.; Niknejad, A.M.: A compact 1 V 18.6 dBm 60 GHz power amplifier in 65 nm CMOS, in IEEE Int. Solid-State Circuits Conf. Digest of Technical Papers, San Francisco, USA, 2011.Google Scholar
[3]Kurita, N.; Kondoh, H.: 60 GHz and 80 GHz wide band power amplifier MMICs in 90 nm CMOS technology, in IEEE Radio Frequency Integrated Circuits Symp., Boston, USA, 2009.Google Scholar
[4]Suzuki, T.; Kawano, Y.; Sato, M.; Hirose, T.; Joshin, K.: 60 and 77 GHz Power Amplifiers in Standard 90 nm CMOS, in IEEE Int. Solid-State Circuits Conf. Digest of Technical Papers, San Francisco, USA, 2008.Google Scholar
[5]Chan, W.L.; Long, J.R.; Spirito, M.; Pekarik, J.J.: A 60 GHz-band 1 V 11.5 dBm power amplifier with 11% PAE in 65 nm CMOS, in IEEE Int. Solid-State Circuits Conf. Digest of Technical Papers, San Francisco, USA, 2009.Google Scholar
[6]Asadi, S.; Yagoub, M.C.E.: Design of an E-band high power amplifier for wireless high data rate communications, in Canadian Conf. Electrical and Computer Engineering, Newfoundland, Canada, 2009.Google Scholar
[7]Dickson, T.O. et al. : The invariance of characteristic current densities in Nanoscale MOSFETs and its impact on algorithmic design methodologies and design porting of Si(Ge) (Bi)CMOS high-speed building blocks. IEEE J. Solid-State Circuits, 41 (2006) 1830–1845.CrossRefGoogle Scholar
[8]Doan, C.H.; Emami, S.; Niknejad, A.M.; Brodersen, R.W.: Millimeter-wave CMOS design. IEEE J. Solid-State Circuits, 40 (2005) 144–155.Google Scholar
[9]Niknejad, A.M.: Electromagnetics for High-speed Analog and Digital Communication Circuits, Cambridge University Press, Cambridge, 2007.Google Scholar