Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-28T12:57:26.030Z Has data issue: false hasContentIssue false

The absolute instability of an inviscid compound jet

Published online by Cambridge University Press:  08 February 2006

ANUJ CHAUHAN
Affiliation:
The Levich Institute and Department of Chemical Engineering, City College of CUNY, New York, NY 10031, USA Present address: Room 237 Chemical Engineering PO Box 116005, University of Florida, Gainesville FL 32611-6005, USA.
CHARLES MALDARELLI
Affiliation:
The Levich Institute and Department of Chemical Engineering, City College of CUNY, New York, NY 10031, USA
DEMETRIOS T. PAPAGEORGIOU
Affiliation:
Department of Mathematics, Center for Applied Mathematics and Statistics, New Jersey Institute of Technology, University Heights, Newark, NJ 07102, USA
DAVID S. RUMSCHITZKI
Affiliation:
The Levich Institute and Department of Chemical Engineering, City College of CUNY, New York, NY 10031, USA

Abstract

This paper examines the emergence of the absolute instability from convectively unstable states of an inviscid compound jet. A compound jet is composed of a cylindrical jet of one fluid surrounded by a concentric annulus of a second, immiscible fluid. For all jet velocities $v$, there are two convectively unstable modes. As in the single-fluid jet, the compound jet becomes absolutely unstable below a critical dimensionless velocity or Weber number $V ({:=}\,\sqrt{v^2\,{\rho_1 R_1}/\sigma_1}$ where $\rho_{1}$, $R_{1}$ and $\sigma _{1}$ are the core density, radius and core–annular interfacial tension), which is a function of the annular/core ratios of densities $\beta$, surface tensions $\gamma$ and radii $a$. At $V\,{=}\,0$, the absolutely unstable modes and growth recover the fastest growing temporal waves. We focus specifically on the effect of $\gamma$ at $a\,{=}\,2$ and $\beta\,{=}\,1$ and find that when the outer tension is significantly less than the inner $(0.1\,{<}\,\gamma\,{<}\,0.3)$, the critical Weber number $V_{\hbox{\scriptsize{\it crit}}}$ decreases with <$\gamma$, whereas for higher ratios $(0.3\,{<}\,\gamma\,{<}\,3)$ it increases. The values (1.2–2.3) of $V_{\hbox{\scriptsize{\it crit}}}$ for the compound jet include the parameter-independent critical value of 1.77 for the single jet. Therefore, increasing the outer tension can access the absolute instability at higher dimensional velocities than for a single jet with the same radius and density as the core and a surface tension equal to the compound jet's liquid–liquid tension. We argue that this potentially facilitates distinguishing experimentally between absolute and convective instabilities because higher velocities and surface tension ratios higher than 1 extend the breakup length of the convective instability. In addition, for $0.3\,{<}\,\gamma\,{<}\,1.16$, the wavelength for the absolute instability is roughly half that of the fastest growing convectively unstable wave. Thus choosing $\gamma$ in this range exaggerates its distinction from the convective instability and further aids the potential observation of absolute instability.

Type
Papers
Copyright
© 2006 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)
Supplementary material: PDF

Chauhan Supplementary material

Appendix.pdf

Download Chauhan Supplementary material(PDF)
PDF 1.7 MB
Supplementary material: PDF

Chauhan Supplementary material

Supplementary Material

Download Chauhan Supplementary material(PDF)
PDF 3 MB