Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T14:37:55.824Z Has data issue: false hasContentIssue false
  • English
  • Français

Coprecipitated 3D nanostructured graphene oxide–Mn3O4 hybrid as anode of lithium-ion batteries

Published online by Cambridge University Press:  28 January 2015

Yongjie Wang
Yongjie Wang*
Affiliation:
Composite Materials and Engineering, Harbin Institute of Technology, Harbin 150001, China
*
a)Address all correspondence to this author. e-mail: yongjie.wang2014@gmail.com
Get access

Abstract

A three-dimensional nanostructured graphene oxide–Mn3O4 hybrid was synthesized by a coprecipitation method and used as an anode material of lithium ion batteries, which reached an initial specific capacity of 1400 mA h/g. This method was developed to simplify the process of fabricating uniform composite nanomaterials for abundant applications. In this work, Mn3O4 particles were coordinately distributed on the surface of reduced graphene oxide nanosheets to avoid detrimental stacking of graphene layers by forming 3D nanostructures, as characterized by a scanning electron microscope. As demonstrated by the in situ observation of a scanning probe microscope, severe pulverization of Mn3O4 particles during charge/discharge processing was significantly abstained when graphene layers constrained swelling and shrinkage. The as-prepared graphene–Mn3O4 nanomaterials exhibited a large specific capacity of 949 mA h/g, high-rechargeable efficiency of ∼98%, and exceptional cyclic stability. After 100 constant-current charging/discharging cycles at 100 mA/g, the specific capacity remained at 792 mA h/g with a coulombic efficiency of 98.1%. Furthermore, the coprecipitation method proposed in this work provides a strategy to fabricate other nanostructured composites for different kinds of applications.

Keywords

coprecipitationmanganese oxidegraphene oxidelithium ion batteries
Type
Articles
Information
Journal of Materials Research , Volume 30 , Issue 4 , 28 February 2015 , pp. 484 - 492
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Chen, W., Zhu, Z., Li, S., Chen, C., and Yan, L.: Efficient preparation of highly hydrogenated graphene and its application as a high-performance anode material for lithium ion batteries. Nanoscale 4, 2124 (2012).CrossRefGoogle ScholarPubMed
Bai, Z., Fan, N., Sun, C., Ju, Z., Guo, C., Yang, J., and Qian, Y.: Facile synthesis of loaf-like ZnMn2O4 nanorods and their excellent performance in Li-ion batteries. Nanoscale 5, 2442 (2013).CrossRefGoogle ScholarPubMed
Verma, P., Maire, P., and Novak, P.: A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries. Electrochim. Acta 55, 6332 (2010).CrossRefGoogle Scholar
Bello, A., Fashedemi, O., Fabiane, M., Lekitima, J., Ozoemena, K., and Manyala, N.: Microwave assisted synthesis of MnO2 on nickel foam-graphene for electrochemical capacitor. Electrochim. Acta 114, 48 (2013).CrossRefGoogle Scholar
Shi, K. and Zhitomirsky, I.: Fabrication of polypyrrole-coated carbon nanotubes using oxidant-surfactant nanocrystals for supercapacitor electrodes with high mass loading and enhanced performance. ACS Appl. Mater. Interfaces 5, 13161 (2013).CrossRefGoogle ScholarPubMed
Bhattacharjya, D., Kim, M., Bae, T., and Yu, J.: High performance supercapacitor prepared from hollow mesoporous carbon capsules with hierarchical nanoarchitecture. J. Power Sources 244, 799 (2013).CrossRefGoogle Scholar
Ghasemi, M., Daud, W., Hassan, S., Oh, S., Ismail, M., Rahimnejad, M., and Jahim, J.: Nano-structured carbon as electrode material in microbial fuel cells: A comprehensive review. J. Alloys Compd. 580, 245 (2013).CrossRefGoogle Scholar
Wang, H., Kakade, B., Tamaki, T., and Yamaguchi, T.: Synthesis of 3D graphite oxide-exfoliated carbon nanotube carbon composite and its application as catalyst support for fuel cells. J. Power Sources 260, 338 (2014).CrossRefGoogle Scholar
Chen, Y., Su, C., Zheng, T., and Shao, Z.: Coke-free direct formic acid solid oxide fuel cells operating at intermediate temperatures. J. Power Sources 220, 147 (2012).CrossRefGoogle Scholar
Yun, U., Lee, J., Lee, S., Lim, T., Park, S., Song, R., and Shin, D.: Fabrication and operation of tubular segmented-in-series (SIS) solid oxide fuel cells (SOFC). Fuel Cells 12, 1099 (2012).CrossRefGoogle Scholar
Safari, M. and Delacourt, C.: Aging of a commercial graphite/LiFePO4 cell. J. Electrochem. Soc. 158, A1123 (2011).CrossRefGoogle Scholar
Banks, C. and Compton, R.: New electrodes for old: From carbon nanotubes to edge plane pyrolytic graphite. Analyst 131, 15 (2006).CrossRefGoogle ScholarPubMed
Mai, Y., Shi, S., Zhang, D., Lum, Y., Gu, C., and Tu, J.: NiO-graphene hybrid as an anode material for lithium ion batteries. J. Power Sources 204, 155 (2012).CrossRefGoogle Scholar
Mai, Y., Zhang, D., Qiao, Y., Gu, C., Wang, X., and Tu, J.: MnO/reduced graphene oxide sheet hybrid as an anode for Li-ion batteries with enhanced lithium storage performance. J. Power Sources 216, 201 (2012).CrossRefGoogle Scholar
Wang, H., Cui, L., Yang, Y., Casalongue, H., Robinson, J., Liang, Y., Cui, Y., and Dai, H.: Mn3O4-graphene hybrid as a high-capacity anode material for lithium ion batteries. J. Am. Chem. Soc. 132, 13978 (2010).CrossRefGoogle ScholarPubMed
Lavoie, N., Malenfant, P., Courtel, F., Abu-Lebdeh, Y., and Davidson, I.: High gravimetric capacity and long cycle life in Mn3O4/graphene platelet/LiCMC composite lithium-ion battery anodes. J. Power Sources 213, 249 (2012).CrossRefGoogle Scholar
Zhang, K., Han, P., Gu, L., Zhang, L., Liu, Z., Kong, Q., Zhang, C., Dong, S., Zhang, Z., Yao, J., Xu, H., Cui, G., and Chen, L.: Synthesis of nitrogen-doped MnO/graphene nanosheets hybrid material for lithium ion batteries. ACS Appl. Mater. Interfaces 4, 658 (2012).CrossRefGoogle ScholarPubMed
Li, B., Cao, H., Shao, J., Li, G., Qu, M., and Yin, G.: Co3O4@graphene composites as anode materials for high-performance lithium ion batteries. Inorg. Chem. 50, 1628 (2011).CrossRefGoogle ScholarPubMed
Kim, G., Nam, I., Kim, N., Park, J., Park, S., and Yi, J.: A synthesis of graphene/Co3O4 thin films for lithium ion battery anodes by coelectrodeposition. Electrochem. Commun. 22, 93 (2012).CrossRefGoogle Scholar
Yu, A., Park, H., Davies, A., Higgins, D., Chen, Z., and Xiao, X.: Free-standing layer-by-layer hybrid thin film of graphene-MnO2 nanotube as anode for lithium ion batteries. J. Phys. Chem. Lett. 2, 1855 (2011).CrossRefGoogle Scholar
Lian, P., Zhu, X., Liang, S., Li, Z., Yang, W., and Wang, H.: Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries. Electrochim. Acta 55, 3909 (2010).CrossRefGoogle Scholar
Huang, X., Zeng, Z., Fan, Z., Liu, J., and Zhang, H.: Graphene-based electrodes. Adv. Mater. 24, 5979 (2012).CrossRefGoogle ScholarPubMed
Chattopadhyay, S., Lipson, A., Karmel, H., Emery, J., Fister, T., Fenter, P., Hersam, M., and Bedzyk, M.: In situ x-ray study of the solid electrolyte interphase (SEI) formation on graphene as a model Li-ion battery anode. Chem. Mater. 24, 3038 (2012).CrossRefGoogle Scholar
Xiang, H., Li, Z., Xie, K., Jiang, J., Chen, J., Lian, P., Wu, J., Yu, Y., and Wang, H.: Graphene sheets as anode materials for Li-ion batteries: Preparation, structure, electrochemical properties, and mechanism for lithium storage. R. Soc. Chem. Adv. 2, 6792 (2012).Google Scholar
Wu, Z., Ren, W., Xu, L., Li, F., and Cheng, H.: Doped graphene sheets as anode materials with superhigh rate and large capacity for lithium ion batteries. ACS Nano 5, 5463 (2011).CrossRefGoogle ScholarPubMed
Zhao, C., Wang, Q., Yang, Y., Zhang, B., and Zhang, X.: Self-assembled manganese oxide structures through direct oxidation. Appl. Surf. Sci. 263, 397 (2012).CrossRefGoogle Scholar
Sun, X., Xu, Y., Ding, P., Chen, G., Zheng, X., Zhang, R., and Li, L.: The composite sphere of manganese oxide and carbon nanotubes as a prospective anode material for lithium-ion batteries. J. Power Sources 255, 163 (2014).CrossRefGoogle Scholar
Lee, R., Lin, Y., Weng, Y., Pan, H., Lee, J., and Wu, N.: Synthesis of high-performance MnOx/carbon composite as lithium-ion battery anode by a facile co-precipitation method: Effects of oxygen stoichiometry and carbon morphology. J. Power Sources 253, 373 (2014).CrossRefGoogle Scholar
Luo, S., Wu, H., Wu, Y., Jiang, K., Wang, J., and Fan, S.: Mn3O4 nanoparticles anchored on continuous carbon nanotube network as superior anodes for lithium ion batteries. J. Power Sources 249, 464 (2014).CrossRefGoogle Scholar
Kang, C., Lahiri, I., Baskaran, R., Kim, W., Sun, Y., and Choi, W.: 3-dimensional carbon nanotube for Li-ion battery anode. J. Power Sources 219, 364 (2012).CrossRefGoogle Scholar
Kaskhedikar, N. and Maier, J.: Lithium storage in carbon nanostructures. Adv. Mater. 21, 2664 (2009).CrossRefGoogle ScholarPubMed
Zhong, K., Xia, X., Zhang, B., Li, H., Wang, Z., and Chen, L.: MnO powder as anode active materials for lithium ion batteries. J. Power Sources 195, 3300 (2010).CrossRefGoogle Scholar
Kawakubo, M., Takeda, Y., Yamamoto, O., and Imanishi, N.: High capacity carbon anode for dry polymer lithium-ion batteries. J. Power Sources 226, 187 (2013).CrossRefGoogle Scholar