Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-10T11:02:38.474Z Has data issue: false hasContentIssue false
  • English
  • Français

Critical current density of Ba2Y1Cu3O7−x superconducting filaments produced by various suspension spinning conditions

Published online by Cambridge University Press:  31 January 2011

Tomoko Goto  and
Masahiro Kada
Tomoko Goto
Affiliation:
Department of Materials Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 466 Japan
Masahiro Kada
Affiliation:
Department of Materials Science and Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 466 Japan
Get access

Abstract

The suspension spinning of a Ba2Y1Cu3Ox superconductor under various conditions was studied to prepare a long filament with high Jc. The oxide powder was suspended in a PVA solution containing a dispersant. The viscous suspension was extruded as a filament into a precipitating medium and coiled on a winding drum. The obtained filament was heated to remove volatile components and to generate the layered perovskite phase. The spinning was examined in an aqueous system and a nonaqueous system. The filament with higher Jc was obtained for the nonaqueous solution. The Jc was dependent on the fineness of the starting oxide powder, solvent, precipitating medium, degree of polymerization of PVA, the kind of dispersant used, and the oxide powder contents of the spinning dope, as well as the heating condition. The highest Jc value obtained by resistivity measurement at 77 K and zero field, 680 A/cm2, was attained for the filament spun under optimum spinning conditions. The magnetization curve of the filament showed that the material was a type II superconductor. The hysteresis of thin filaments was relatively small compared with that for the thick filaments. The Jc at 79 K, estimated from the magnetization curve, was one order of magnitude higher than the Jc measured by the resistivity method and decreased drastically with increasing field.

Type
Articles
Information
Journal of Materials Research , Volume 3 , Issue 6 , December 1988 , pp. 1292 - 1296
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Bednorz, J. and Muller, A. K., Z. Phys. B 64, 189 (1986).CrossRefGoogle Scholar
2Wu, M. K., Ashburn, J. R., Torng, C. J., Hor, P. H., Meng, R. L., Gao, L., Huang, Z. J., Wang, Y. Q., and Chu, C. W., Phys. Rev. Lett. 58, 908 (1987).CrossRefGoogle Scholar
3Yamada, Y., Fukushima, N., Nakayama, S., Niu, H., Takemura, M., Hayashi, M., Yoshino, H., and Murase, S., Jpn. J. Appl. Phys. 26-3, 1208 (1987).Google Scholar
4Enomoto, Y., Murakami, T., Suzuki, M., and Moriwaki, K., Jpn. J. Appl. Phys. 26-3, L1248 (1987).CrossRefGoogle Scholar
5Goto, T., Horiba, I., Kada, M., and Tsujihara, M., Jpn. J. Appl. Phys. 26-3, 1211 (1987).CrossRefGoogle Scholar
6Goto, T. and Kada, M., Jpn. J. Appl. Phys. 26, L1527 (1987).CrossRefGoogle Scholar
7Goto, T. and Horiba, I., Jpn. J. Appl. Phys. 26, L1970 (1987).CrossRefGoogle Scholar
8Goto, T. and Tsujihara, M., J. Mater. Sci. 7, 283 (1988).Google Scholar
9Goto, T., Horiba, I., Kada, M., and Tsujihara, M., Proceedings of International Conference on High-Tc, Superconductors and Materials and Mechanisms of Superconductivity, Interlaken, 1988, Part 1, p. 800.CrossRefGoogle Scholar
10Goto, T., Jpn. J. Appl. Phys. 27, L680 (1988).CrossRefGoogle Scholar
11Gennes, P. G. de, Physik Kondens. Mater. 3, 79 (1964).Google Scholar
12Maki, K., Physics 1, 21 (1964).CrossRefGoogle Scholar
13lye, Y., Tamegai, T., Takeya, H., and Takei, H., Jpn. J. Appl. Phys. 26, L1057 (1987).Google Scholar
14Bean, C. P., Phys. Lev. Lett. 8, 250 (1962).CrossRefGoogle Scholar
15Kumakura, H., Uehara, M., Yoshida, Y., and Togano, K., Phys. Lett. A 124, 367 (1987).CrossRefGoogle Scholar