Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-28T16:16:54.502Z Has data issue: false hasContentIssue false

Crystallinity of rf-sputtered MoS2 films

Published online by Cambridge University Press:  31 January 2011

Jeffrey R. Lince
Affiliation:
Chemistry and Physics Laboratory, The Aerospace Corporation, El Segundo, California 90245
Paul D. Fleischauer
Affiliation:
Chemistry and Physics Laboratory, The Aerospace Corporation, El Segundo, California 90245
Get access

Abstract

The crystallinity and morphology of thin, radio-frequency (rf) -sputtered MoS2 films deposited on 440C stainless steel substrates at both ambient (∼70°C) and high temperatures (245°C) were studied by scanning electron microscopy (SEM) and by x-ray diffraction (Read thin-film photography and 0−20 scans). Under SEM the films exhibited a “ridgelike” (or platelike) formation region for thicknesses between 0.18 and 1.0 μm MoS2. X-ray diffraction was shown to give more detailed and accurate information than electron defraction, previously used for elucidating the structure of sputtered lubricant films. Read thin-film x-ray diffraction photographs revealed patterns consistent with the presence of polycrystalline films and strong orientation of the MoS2 crystallites. Correlation of those patterns with 0−20 scans of the films indicated that the basal planes of the MoS2 crystallites [i.e., the (001) planes] were perpendicular to the substrate surface plane, and that various edge planes [i.e., the (h k 0) planes] in the individual crystallites were parallel to the surface plane, in agreement with previous observations of thinner films. Sliding wear caused the crystallites to orient with their basal planes parallel to the surface plane. The crystallite lattices in all films in this study were shown to exhibit compressive stress (∼ 3%–5% with respect to natural molybdenite) in the direction perpendicular to the (h k 0) planes, and the worn films were expanded (i.e., exhibited tensile stress) perpendicular to the (001) plane. In addition, the shapes of the x-ray diffraction peaks were strongly influenced by the presence of oxygen impurities and/or sulfur vacancies in the MoS2 lattice, indicating that x-ray diffraction may provide a simple quality-control test for the production of a film with optimum lubricating properties.

Type
Articles
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Mattox, D. M., in Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM special technical publication 640, edited by Mittal, K. L. (ASTM, Baltimore, MD, 1978), p. 54.CrossRefGoogle Scholar
2Nittono, O., Sadamoto, Y., and Gong, S. K., Jpn. J. Appl. Phys. 26, 157 (1987).CrossRefGoogle Scholar
3Spalvins, T., NASA Tech. Note D-7170, 1973.Google Scholar
4Dimigen, H., Hiibsch, H., Willich, P., and Reichelt, K., Thin Solid Films 129, 79 (1985).CrossRefGoogle Scholar
5Ashcroft, N. W. and Mermin, N. D., Solid State Physics (Saunders College, Philadelphia, PA, 1976), Chap. 6; see also M. H. Read and C. Altman, Appl. Phys. Lett. 7, 51 (1965).xsGoogle Scholar
6Fleischauer, P. D., in Proceedings of the International Conference Metallurgical Coatings, San Diego, CA, 23-27 March 1987.Google Scholar
7Fleischauer, P. D. and Bauer, R., ASLE Trans. 30, 160 (1987).CrossRefGoogle Scholar
8Buck, V., Vacuum 36, 89 (1986).CrossRefGoogle Scholar
9Spalvins, T., Thin Solid Films 96, 17 (1982).CrossRefGoogle Scholar
10Joint Committee on Powder Diffraction Standards, Powder Diffraction File, Card No. 6–0097, International Center for Diffraction Data, Swarthmore, PA, 1980.Google Scholar
11Buck, V., Thin Solid Films 139, 157 (1986).CrossRefGoogle Scholar
12Fleischauer, P. D., ASLE Trans. 27, 82 (1984).CrossRefGoogle Scholar
13Jamison, W. E., ASLE Trans. 15, 296 (1972); ASLE Special Publication-14, 1984, pp. 73–87.CrossRefGoogle Scholar
14Fleischauer, P. D. and Bauer, R., ASLE Trans, (to be published).Google Scholar