Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-28T17:08:54.427Z Has data issue: false hasContentIssue false
  • English
  • Français

Deformation and failure of a film/substrate system subjected to spherical indentation: Part I. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system

Published online by Cambridge University Press:  01 March 2006

Souvik Math ,
V. Jayaram  and
S.K. Biswas
Souvik Math
Affiliation:
Department of Mechanical Engineering, Indian Institute of Science, Bangalore–560012, India
V. Jayaram
Affiliation:
Department of Metallurgy, Indian Institute of Science, Bangalore–560012, India
S.K. Biswas*
Affiliation:
Department of Mechanical Engineering, Indian Institute of Science, Bangalore–560012, India
*
a) Address all correspondence to this author. e-mail: skbis@mecheng.iisc.ernet.in
Get access

Abstract

Our concern here is to rationalize experimental observations of failure modes brought about by indentation of hard thin ceramic films deposited on metallic substrates. By undertaking this exercise, we would like to evolve an analytical framework that can be used for designs of coatings. In Part I of the paper we develop an algorithm and test it for a model system. Using this analytical framework we address the issue of failure of columnar TiN films in Part II [J. Mater. Res.21, 783 (2006)] of the paper. In this part, we used a previously derived Hankel transform procedure to derive stress and strain in a birefringent polymer film glued to a strong substrate and subjected to spherical indentation. We measure surface radial strains using strain gauges and bulk film stresses using photo elastic technique (stress freezing). For a boundary condition based on Hertzian traction with no film interface constraint and assuming the substrate constraint to be a function of the imposed strain, the theory describes the stress distributions well. The variation in peak stresses also demonstrates the usefulness of depositing even a soft film to protect an underlying substrate.

Keywords

CoatingElastic propertiesStress/strain relationship
Type
Articles
Information
Journal of Materials Research , Volume 21 , Issue 3 , March 2006 , pp. 774 - 782
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Bhowmick, S., Kale, A.N., Jayaram, V., Biswas, S.K.: Contact damage in TiN coatings on steel. Thin Solid Films 436((2)), 250 (2003).CrossRefGoogle Scholar
2.Lawn, B.R., Deng, Y., Miranda, P., Pajares, A., Chai, H., Kim, D.K.: Overview: Damage in brittle layer structures from concentrated loads. J. Mater. Res. 17((12)), 3019 (2002).CrossRefGoogle Scholar
3.Bhowmick, S., Bhide, R., Hoffmann, M., Jayaram, V., Biswas, S.K. Fracture mode transitions during indentation of columnar TiN coatings on metal. Philos. Mag. (2005, in press).CrossRefGoogle Scholar
4.Harding, J.W., Sneddon, I.N.: The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch. Proc. Cambridge Philos. Soc. 41, 16 (1945).CrossRefGoogle Scholar
5.Sneddon, I.N.: Boussineq’s problem for a rigid cone. Proc. Cambridge Philos. Soc. 44, 492 (1948).CrossRefGoogle Scholar
6.Sneddon, I.N.: The relation between load and penetration in the axi-symmetric Boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47 (1965).CrossRefGoogle Scholar
7.Matthewson, M.J.: Axi-symmetric contact on thin compliant coatings. J. Mech. Phys. Solids 29, 89 (1981).CrossRefGoogle Scholar
8.Conway, H.D., Vogel, S.M., Farnham, K.A., So, S.: Normal and shearing contact stresses in indented strips and slabs. Int. J. Eng. Sci. 4, 343 (1966).CrossRefGoogle Scholar
9.Yang, F.: Thickness effect on the indentation of an elastic layer. Mater. Sci. Eng. A 358((1–2)), 226 (2003).CrossRefGoogle Scholar
10.VanderZwaag, S., Field, J.E.: Thickness effect on the indentation of an elastic layer. Philos. Mag. A 46((1)), 133 (1982).Google Scholar
11.Djabella, H., Arnell, R.D.: Finite element analysis of the contact stresses in an elastic coating on an elastic substrate. Thin Solid Films 213, 205 (1992).CrossRefGoogle Scholar
12.Weppelmann, E., Swain, M.V.: Investigation of the stresses and stress intensity factors responsible for fracture of thin films during ultra-micro indentation tests with spherical indenters. Thin Solid Films 286, 111 (1996).CrossRefGoogle Scholar
13.Schwarzer, N., Djabella, H., Richter, F., Arnell, R.D.: Comparison between analytical and FEM calculations for the contact problem of spherical indenters on layered materials. Thin Solid Films 270, 279 (1995).CrossRefGoogle Scholar
14.Schwarzer, N., Richter, F., Hecht, G.: Comparison between analytical and FEM calculations for the contact problem of spherical indenters on layered materials. Surf Coat. Technol. 114, 292 (1999).CrossRefGoogle Scholar
15.Li, J., Chow, T-W.: Elastic field of a thin-film/substrate system under an axi-symmetric loading. Int. J. Solid Struct. 34, 4463 (1997).CrossRefGoogle Scholar
16.Kuo, C.H., Keer, L.M.: Contact stress analysis of a layered transversely isotropic half-space. J. Tribol.: Trans. ASME 114, 253 (1992).CrossRefGoogle Scholar
17.Wang, W., Ishikawa, H.: A method for linear elasto-static analysis of multi-layered axi-symmetrical bodies using Hankel’s transform. Comp. Mech. 27, 474 (2001).CrossRefGoogle Scholar
18.Stone, D.S.: Elastic rebound between an indenter and a layered specimen: Part I. Model. J. Mater. Res. 13, 3207 (1998).CrossRefGoogle Scholar
19.Lloyd, S.J., Molina-Aldareguia, J.M.: Multilayered materials: A palette for the materials artist. Philos. Trans. R. Soc. London, A 361, 2931 (2003).CrossRefGoogle ScholarPubMed
20.Nordin, M., Larsson, M., Hogmark, S.: Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/NbN, and TiN/TaN coatings on cemented carbide. Surf. Coat. Technol. 106, 234 (1998).CrossRefGoogle Scholar
21.Yashar, P.C., Sproul, W.D.: Nanometer scale multilayered hard coatings. Vacuum 55, 179 (1999).CrossRefGoogle Scholar
22.Maugis, D.: Contact, Adhesion and Rupture of Elastic Solids (Springer-Verlag, Berlin, Germany, 2000), pp. 98–112.CrossRefGoogle Scholar
23.Johnson, K.L.: Contact Mechanics (Cambridge University Press, Cambridge, UK, 1985), p. 139.CrossRefGoogle Scholar
24.Gao, H., Chiu, C.H., Lee, J.: Elastic contact versus indentation modelling of multi-layered materials. Int. J. Solid Struct. 29, 2471 (1992).Google Scholar
25.Loubet, J.L., Georges, J.M., Meille, G. Vickers indentation curves for elasto-plastic materials, in Microindentation Techniques in Materials Science and Engineering, edited by Blau, P. and Lawn, B.R. (ASTM Specical Technical Publication, 1985), pp. 72–89.CrossRefGoogle Scholar
26.Jayachandran, R., Boyce, M.C., Argon, A.S. Mechanics of the indentation test and its use to assess the adhesion of polymeric coatings, in Adhesion Measurement of Films and Coatings, edited by Mittal, K.L.VSP (1995), pp. 189–215.CrossRefGoogle Scholar
27.Epstein, J.S., Lloyd, W.R.: Refined methods in photoelastic stress analysis with application to fracture mechanics. Opt. Lasers Eng. 14, 185 (1991).CrossRefGoogle Scholar