Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Lee, Sea-Hoon
Rixecker, Georg
Aldinger, Fritz
Choi, Sung-Churl
and
Auh, Keun-Ho
2003.
Effect of spray coated SiO2 layers on the low temperature oxidation of Si3N4.
Journal of the European Ceramic Society,
Vol. 23,
Issue. 8,
p.
1199.
Ade, M
and
Haußelt, J
2003.
Electroconductive ceramic composites with low-to-zero shrinkage during sintering.
Journal of the European Ceramic Society,
Vol. 23,
Issue. 11,
p.
1979.
Lee, S.-H.
Rixecker, G.
Aldinger, F.
Choi, S.-C.
and
Auh, K.-H.
2004.
Microstructure and oxidation behaviour of silicate coating on Si3N4: comparison with native oxide layers.
British Ceramic Transactions,
Vol. 103,
Issue. 3,
p.
110.
ZHU, Xinwen
SAKKA, Yoshio
ZHOU, You
and
HIRAO, Kiyoshi
2006.
The Effect of Embedding Conditions on the Thermal Conductivity of .BETA.-Si3N4.
Journal of the Ceramic Society of Japan,
Vol. 114,
Issue. 1335,
p.
1093.
JUNG, H. J.
AHN, K. Y.
CHOI, S. C.
LEE, S. H.
and
ALDINGER, F.
2008.
Low pressure sintering of sialon using different sintering additives.
Journal of the Ceramic Society of Japan,
Vol. 116,
Issue. 1349,
p.
130.
Lee, Sea-Hoon
Weinmann, Markus
Gerstel, Peter
Rixecker, Georg
Choi, Sung-Churl
and
Aldinger, Fritz
2008.
Novel precursor-derived Al–C–N–(O)-based ceramic additive for the low-temperature pressureless sintering of silicon nitride.
Journal of Materials Research,
Vol. 23,
Issue. 6,
p.
1713.
Lee, Sea‐Hoon
Kaiser, Gerhard
Rixecker, Georg
Aldinger, Fritz
Park, Jae‐Young
Auh, Keun‐Ho
and
Choi, Sung‐Churl
2008.
Hydrothermal Treatment of Si3N4 for the Improvement of Oxidation Resistance at 1400°C.
Journal of the American Ceramic Society,
Vol. 91,
Issue. 2,
p.
679.
Lee, Sea‐Hoon
2008.
Pre‐Treatment of Si3N4 Filler Particles for the Improvement of Si3N4filler/Si–C–Nmatrix Particulate‐Reinforced Composites.
Journal of the American Ceramic Society,
Vol. 91,
Issue. 6,
p.
2047.
Lee, Sea-Hoon
2009.
Thermal stability and mechanical properties of SiC particulate-reinforced Si–C–N composites after heating at 2000°C.
Journal of the European Ceramic Society,
Vol. 29,
Issue. 16,
p.
3387.
Müller, Marcus
Rögner, Joachim
Okolo, Brando
Bauer, Werner
and
Knitter, Regina
2010.
Processing of micro-components made of sintered reaction-bonded silicon nitride (SRBSN). Part 2: Sintering behaviour and micro-mechanical properties.
Ceramics International,
Vol. 36,
Issue. 2,
p.
707.
Müller, Marcus
Rögner, Joachim
Bauer, Werner
and
Knitter, Regina
2011.
Influence of the surface constitution on the as-sintered strength of Si3N4 micro specimens.
Materials Science and Engineering: A,
Vol. 528,
Issue. 27,
p.
7895.
Müller, Marcus
Çetinel, Fatih A.
Rögner, Joachim
Bauer, Werner
and
Knitter, Regina
2013.
Surface state defining factors as key to the strength of ceramic micro parts.
Microsystem Technologies,
Vol. 19,
Issue. 4,
p.
555.
Nikonam M., Raheleh
Pugh, Martin D.
and
Drew, Robin A.L.
2019.
Microstructural evolution mechanism of porous reaction bonded silicon nitride ceramics heat-treated in two powder beds.
Ceramics International,
Vol. 45,
Issue. 17,
p.
21986.
Qiu, Bao-Fu
Duan, Xiao-Ming
Zhang, Zhuo
Liao, Xing-Qi
Yang, Zhi-Hua
Cai, De-Long
Jia, De-Chang
and
Zhou, Yu
2020.
Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering.
Rare Metals,
Vol. 39,
Issue. 5,
p.
555.
Ding, Jianyan
Huang, Shuijing
Zheng, Hongling
Huang, Liting
Zeng, Peiru
Ye, Shanshan
Wu, Quansheng
and
Zhou, Jiangcong
2021.
A novel broad-band cyan light-emitting oxynitride based phosphor used for realizing the full-visible-spectrum lighting of WLEDs.
Journal of Luminescence,
Vol. 231,
Issue. ,
p.
117786.