Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-15T02:48:12.614Z Has data issue: false hasContentIssue false
  • English
  • Français

Impedance spectroscopy analysis of zirconia:8 mol% yttria solid electrolytes with graphite pore former

Published online by Cambridge University Press:  31 January 2011

R. Muccillo
R. Muccillo*
Affiliation:
CMDMC—Center of Science and Technology of Materials, Energy and Nuclear Research Institute, S. Paulo, SP 05422-970, Brazil
*
a) Address all correspondence to this author. e-mail: muccillo@usp.br
Get access

Abstract

Porous ZrO2:8 mol% Y2O3 sintered ceramics were prepared by adding graphite powder as pore former before sintering. The thermal elimination of graphite was evaluated by thermogravimetric analysis. Impedance spectroscopy analysis was carried out in the 5 Hz to 13 MHz frequency range in specimens sintered with and without pore former. The deconvolution of the impedance diagrams, [Z″(ω) × Z′(ω)] and [Z″(ω) × log f], and the numerical residuals resulting from the subtraction of normalized impedance spectroscopy diagrams measured in specimens with and without pore formers were evaluated. A comparison of the impedance diagrams of samples sintered with and without pore former shows evidence of a modification of the electrical response caused by pores. The results show the unequivocal ability of the impedance spectroscopy technique to gauge microstructural modification caused by the presence of pores in ionic conducting solids.

Keywords

CeramicElectrical propertiesPorosity
Type
Articles
Information
Journal of Materials Research , Volume 24 , Issue 5 , May 2009 , pp. 1780 - 1784
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Guo, X. and Waser, R.: Electrical properties of the grain boundaries of oxygen ion conductors: Acceptor-doped zirconia and ceria. ?Prog. Mater. Sci. 51, 151 (2006).CrossRefGoogle Scholar
2.Verkerk, M.J., Middelhuis, B.J., and Burggraaf, A.J.: Effect of grain-boundaries on the conductivity of high-purity ZrO2–Y2O3 ceramics. Solid State Ionics 6, 159 (1982).Google Scholar
3.Guo, X.: Physical origin of the intrinsic grain-boundary resistivity of stabilized-zirconia—Role of the space-charge layers. Solid State Ionics 81, 235 (1995).CrossRefGoogle Scholar
4.Guo, X.: Solute segregations at the space-charge layers of stabilized zirconia: An opportunity for ameliorating conductivity. J. Eur. Ceram. Soc. 16, 575 (1996).CrossRefGoogle Scholar
5.Bingham, D., Tasker, P.W., and Cormack, A.N.: Simulated grain-boundary structures and ionic-conductivity in tetragonal zirconia. Philos. Mag. A 60, 1 (1989).Google Scholar
6.Bauerle, J.E.: Study of solid electrolyte polarization by a complex admittance method. J. Phys. Chem. Solids 30, 2657 (1969).Google Scholar
7.Barsoukov, E. and Macdonald, J.R.: Impedance Spectroscopy, Theory, Experiment, and Applications, 2nd ed. (John Wiley & Sons, Hoboken, NJ, 2005).CrossRefGoogle Scholar
8.Kleitz, M., Bernard, H., Fernandez, E., and Schouler, E.: Impedance spectroscopy and electrical resistance measurements on stabilized zirconia, in Advances in Ceramics, Vol. 3, Science and Technology of Zirconia, edited by Heuer, A.H. and Hobbs, L.W. (The American Ceramic Society, Columbus, OH, 1981), p. 310.Google Scholar
9.Fleig, J. and Maier, J.: A finite element study on the grain boundary impedance of different microstructures. J. Electrochem. Soc. 145, 2081 (1998).CrossRefGoogle Scholar
10.Fleig, J. and Maier, J.: Finite-element calculations on the impedance of electroceramics with highly resistive grain boundaries: I, Laterally inhomogeneous grain boundaries. J. Am. Ceram. Soc. 82, 3485 (1999).Google Scholar
11.Fleig, J.: The influence of non-ideal microstructures on the analysis of grain boundary impedances. Solid State Ionics 131, 117 (2000).CrossRefGoogle Scholar
12.Fleig, J.: The grain boundary impedance of random microstructures: Numerical simulations and implications for the analysis of experimental data. Solid State Ionics 150, 181 (2002).CrossRefGoogle Scholar
13.Brug, G.J., Van der Eeden, A.L.G., Sluyters-Rehbach, M., and Sluyters, J.H.: The analysis of electrode impedances complicated by the presence of a constant phase element. J. Electroanal. Chem. 176, 275 (1984).Google Scholar
14.Badwal, S.P.S.: Grain-boundary resistivity in zirconia-based materials: Effect of sintering temperatures and impurities. Solid State Ionics 76, 67 (1995).Google Scholar
15.Rice, R.W.: Porosity of Ceramics (Marcel Dekker, New York, 1998).Google Scholar
16.Rice, R.W.: Ceramic Fabrication Technology (Marcel Dekker, New York, 2003).Google Scholar
17.Woyansky, J.S., Scott, C.E., and Minnear, W.P.: Processing of porous ceramics. Am. Ceram. Soc. Bull. 71, 1674 (1992).Google Scholar
18.Dessemond, L., Muccillo, R., Hénault, M., and Kleitz, M.: Electric conduction-blocking effects of voids and second phases in stabilized zirconia. Appl. Phys. A 57, 57 (1993).Google Scholar
19.Kleitz, M., Pescher, C., and Dessemond, L.: Impedance spectroscopy of microstructure defects and crack characterization, in Science and Technology of Zirconia V, edited by Badwal, S.P.S., Bannister, M.J., and Hannink, R.H.J. (Technomic Publishing, Lancaster, PA, 1993), p. 593.Google Scholar
20.Muccillo, E.N.S. and Kleitz, M.: Impedance spectroscopy of Mg-partially stabilized zirconia and cubic phase decomposition. J. Eur. Ceram. Soc. 16, 453 (1996).Google Scholar
21.Fonseca, F.C. and Muccillo, R.: Impedance spectroscopy analysis of percolation in (yttria-stabilized zirconia)-yttria ceramic composites. Solid State Ionics 166, 157 (2004).Google Scholar
22.Vijayakumar, M. and Bohnke, O.: The current detour effect observed on materials with random microstructure: Experimental evidence from Li3xLa2/3−xTiO3 studied by impedance spectroscopy. J. Eur. Ceram. Soc. 26, 3221 (2006).Google Scholar
23.Kleitz, M. and Kennedy, J.H.: Resolution of multicomponent impedance diagrams, in Fast Ion Transport in Solids, edited by Vashishta, P., Mundy, J.N., and Shenoy, G.K. (Elsevier North Holland, The Netherlands, 1979), p. 185.Google Scholar