Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-28T05:20:11.561Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure evolution and enhanced mechanical properties of hot rolled Mg–3Al–Zn alloy with the addition of Al and Si as a eutectic alloy

Published online by Cambridge University Press:  27 June 2017

Liuwei Zheng ,
Kaibo Nie ,
Huihui Nie ,
Wanggang Zhang ,
Wei Liang  and
Yide Wang
Liuwei Zheng
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; and College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Kaibo Nie
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; and College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Huihui Nie
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China; and Shanxi Institute of Energy, Taiyuan 030600, China
Wanggang Zhang
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; and College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Wei Liang*
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; and College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Yide Wang
Affiliation:
Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan 030024, China; and Taiyuan Iron and Steel (Group) Co., LTD, Taiyuan 030003, China
*
a) Address all correspondence to this author. e-mail: liangwei@tyut.edu.cn
Get access

Abstract

Mg–3Al–Zn alloy with the addition of Al and Si as a eutectic alloy was subjected to conventional hot rolling. The corresponding mechanical properties, microstructure evolution, and dynamic recrystallization mechanism were investigated by optical microscope, scanning electron microscope, electron backscattered diffraction (EBSD), and tensile tests. The experimental results indicated that the Mg–3(Al–Si)–Zn alloy had a microstructure refinement, thus rendering an enhanced mechanical properties in comparison with the Mg–3Al–Zn alloy. The refined Mg2Si particles could act as potential nucleation sites for recrystallization in as-rolled Mg–3(Al–Si)–Zn alloy sheets, which resulted in more completely recrystallized regions through particle stimulated nucleation and a weakened basal texture compared to Mg–3Al–Zn alloy. The improvement in the tensile strength of the as-rolled Mg–3(Al–Si)–Zn alloy can be attributed to grain refinement and second phase strengthening caused by the refined Mg2Si particles.

Keywords

mechanical propertiesmicrostructureAl–Si eutectic alloyrecrystallizationtexture
Type
Articles
Information
Journal of Materials Research , Volume 32 , Issue 18 , 28 September 2017 , pp. 3564 - 3573
Check for updates
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Contributing Editor: Jürgen Eckert

References

REFERENCES

Zhang, H., Huang, G., Roven, H.J., Wang, L., and Pan, F.: Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets. Mater. Des. 50, 667 (2013).Google Scholar
Ross, N.G., Barnett, M.R., and Beer, A.G.: Effect of alloying and extrusion temperature on the microstructure and mechanical properties of Mg–Zn and Mg–Zn–RE alloys. Mater. Sci. Eng., A 619, 238 (2014).CrossRefGoogle Scholar
Huang, H., Yuan, G.Y., Chu, Z.H., and Ding, W.J.: Microstructure and mechanical properties of double continuously extruded Mg–Zn–Gd-based magnesium alloys. Mater. Sci. Eng., A 560, 241 (2013).Google Scholar
Chen, W.L., Wang, W.W., Wang, H.X., Ling, Y.M., and Park, S.H.: Improved mechanical properties of ECAPed Mg–15Al alloy through Nd addition. Mater. Sci. Eng., A 633, 63 (2015).Google Scholar
Stanford, N., Marceau, R.K.W., and Barnett, M.R.: The effect of high yttrium solute concentration on the twinning behavior of magnesium alloys. Acta Mater. 82, 447 (2015).CrossRefGoogle Scholar
Ando, D., Koike, J., and Sutou, Y.: The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys. Mater. Sci. Eng., A 600, 145 (2014).Google Scholar
Nie, K.B., Deng, K.K., Wang, X.J., Xu, F.J., Wu, K., and Zheng, M.Y.: Multidirectional forging of AZ91 magnesium alloy and its effects on microstructures and mechanical properties. Mater. Sci. Eng., A 624, 157 (2015).Google Scholar
Yuan, G.Y., Liu, Z.L., Wang, Q.D., and Ding, W.J.: Microstructure refinement of Mg–Al–Zn–Si alloys. Mater. Lett. 56, 53 (2002).Google Scholar
Xue, F., Min, X.G., and Sun, Y.S.: Microstructures and mechanical properties of AZ91 alloy with combined additions of Ca and Si. J. Mater. Sci. 41, 4725 (2006).Google Scholar
Guo, W., Wang, Q.D., Ye, B., and Zhou, H.: Enhanced microstructure homogeneity and mechanical properties of AZ31–Si composite by cyclic closed-die forging. J. Alloys Compd. 552, 409 (2013).Google Scholar
Wang, W.H., Wang, H.X., Liu, Y.M., Nie, H.H., and Chen, W.L.: Effect of SiC nanoparticles addition on the microstructures and mechanical properties of ECAPed Mg9Al–1Si alloy. J. Mater. Res. 32, 615 (2017). doi: 10.1557/jmr.2016.514.Google Scholar
Wang, Z.W., Wang, H.X., Gong, J.L., Li, M., Cheng, W.L., and Liang, W.: Modification and refinement effects of Sb and Sr on Mg17Al12 and Mg2Si phases in Mg–12Al–0.7Si alloy. China Foundry 13, 310 (2016).Google Scholar
Sheng, S.D., Chen, D., and Chen, Z.H.: Effects of Si addition on microstructure and mechanical properties of RS/PM (rapid solidification and powder metallurgy) AZ91 alloy. J. Alloys Compd. 470, L17 (2009).Google Scholar
Lü, Y.Z., Wang, Q.D., Zeng, X.Q., Zhu, Y.P., and Ding, W.J.: Behavior of Mg–6Al–xSi alloys during solution heat treatment at 420 °C. Mater. Sci. Eng., A 301, 255 (2001).Google Scholar
Shi, Q.X., Bian, L.P., Liang, W., Chen, Z.Q., Yang, F.Q., and Wang, Y.D.: Effects of adding Al–Si eutectic alloy and hot rolling on microstructures and mechanical behavior of Mg–8Li alloys. J. Alloys Compd. 631, 129 (2015).Google Scholar
Gong, J.L., Liang, W., Wang, H.X., Zhao, X.G., and Bian, L.P.: Microstructure and mechanical properties of Mg–12Al–0.7Si magnesium alloy processed by equal channel angular pressing. Rare Met. Mater. Eng. 42, 1800 (2013).Google Scholar
Jiang, M.G., Yan, H., and Chen, R.S.: Enhanced mechanical properties due to grain refinement and texture modification in an AZ61 Mg alloy processed by small strain impact forging. Mater. Sci. Eng., A 621, 204 (2015).Google Scholar
Jiang, M.G., Yan, H., and Chen, R.S.: Microstructure, texture and mechanical properties in an as-cast AZ61 Mg alloy during multi-directional impact forging and subsequent heat treatment. Mater. Des. 87, 891 (2015).Google Scholar
Zhu, S.Q., Yan, H.G., Chen, J.H., Wu, Y.Z., Liu, J.Z., and Tian, J.: Effect of twinning and dynamic recrystallization on the high strain rate rolling process. Scr. Mater. 63, 985 (2010).Google Scholar
Wang, Z.W., Wang, H.X., Wang, W.H., Ren, G.X., Nie, K.B., Liu, Y.M., and Liang, W.: The effect of high Al content on the microstructure and mechanical properties of Mg–xAl alloys. Int. J. Mater. Res. 108, 45 (2017).Google Scholar
Perez-Prado, M.T., del Valle, J.A., and Ruano, O.A.: Grain refinement of Mg–Al–Zn alloys via accumulative roll bonding. Scr. Mater. 51, 1093 (2004).Google Scholar
Wu, X.L., Yang, M.X., Yuan, F.P., Wu, G.L., Wei, Y.J., Huang, X.X., and Zhu, Y.T.: Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc. Natl. Acad. Sci. U. S. A. 112, 14501 (2015).Google Scholar
Chen, W.Z., Yu, Y., Wang, X., Wang, E.D., and Liu, Z.Y.: Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis. Mater. Sci. Eng., A 575, 136 (2013).Google Scholar
Yan, H., Rao, Y.S., and He, R.: Morphological evolution of semi-solid Mg2Si/AM60 magnesium matrix composite produced by ultrasonic vibration process. J. Mater. Process. Technol. 214, 612 (2014).CrossRefGoogle Scholar
Fintová, S. and Kunz, L.: Fatigue properties of magnesium alloy AZ91 processed by severe plastic deformation. J. Mech. Behav. Biomed. Mater. 42, 219 (2015).Google Scholar
Guo, Q., Yan, H.G., Chen, Z.H., and Zhang, H.: Grain refinement in as-cast AZ80 Mg alloy under large strain deformation. Mater. Charact. 58, 162 (2007).Google Scholar
Wang, H.X., Zhou, B., Zhao, Y.T., Zhou, K.K., Cheng, W.L., and Liang, W.: Effect of Si addition on the microstructure and mechanical properties of ECAPed Mg–15Al alloy. Mater. Sci. Eng., A 589, 119 (2014).Google Scholar
Al-Samman, T.: Modification of texture and microstructure of magnesium alloy extrusions by particle-stimulated recrystallization. Mater. Sci. Eng., A 560, 561 (2013).Google Scholar
Park, S.H., Kim, S.H., Kim, Y.M., and You, B.S.: Improving mechanical properties of extruded Mg–Al alloy with a bimodal grain structure through alloying addition. J. Alloys Compd. 646, 932 (2015).Google Scholar
Stanford, N. and Barnett, M.R.: The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility. Mater. Sci. Eng., A 496, 399 (2008).Google Scholar
Robson, J.D., Henry, D.T., and Davis, B.: Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation. Acta Mater. 57, 2739 (2009).Google Scholar
Basu, I. and Al-Samman, T.: Twin recrystallization mechanisms in magnesium-rare earth alloys. Acta Mater. 96, 111 (2015).Google Scholar
Huang, X.S., Suzuki, K., and Saito, N.: Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793 K. Scr. Mater. 60, 651 (2009).Google Scholar
Huang, X.S., Suzuki, K., Chino, Y., and Mabuchi, M.: Influence of initial texture on cold deep draw ability of Mg–3Al–1Zn alloy sheets. Mater. Sci. Eng., A 565, 359 (2013).Google Scholar