Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-13T02:18:23.993Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of anti-solvent engineering toward high performance perovskite solar cells

Published online by Cambridge University Press:  29 April 2019

Jian Li Open the ORCID record for Jian Li [Opens in a new window] ,
Ruihan Yang ,
Longcheng Que ,
Yafei Wang ,
Feng Wang ,
Jiang Wu  and
Shibin Li
Jian Li
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
Ruihan Yang
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
Longcheng Que*
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
Yafei Wang
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
Feng Wang
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
Jiang Wu
Affiliation:
Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China; and Department of Electronic and Electrical Engineering, University College London, London WC1E7JE, U.K.
Shibin Li
Affiliation:
State Key Laboratory of Electronic Thin Films and Integrated Devices, and School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, Sichuan 610054, China
*
a)Address all correspondence to this author. e-mail: quelongcheng@gmail.com
Get access

Abstract

Anti-solvent treatment assisted crystallization is currently one of the most widely used methods to obtain high-quality perovskite films ascribed to its great operability. However, choosing a proper anti-solvent toward high-quality perovskite film for perovskite solar cells (PSCs) remains elusive. In this study, we qualitatively evaluate the impact of anti-solvent treatment on the grain growth and phase composition of perovskite by X-ray diffraction, scanning electron microscope, Fourier transform infrared spectrometer, and UV-vis absorption measurement, etc. The results demonstrate that the chemical groups in anti-solvents also affect the formation of perovskites, and anti-solvents with a low boiling point and good polarity contribute to the superior efficiency and reproducibility of PSCs. The device prepared using ether as an anti-solvent exhibits the best power conversion efficiency of 18.47%. The results indicate a new path toward selecting an ideal anti-solvent to improve the performance of PSCs.

Keywords

perovskite solar cellsanti-solventgreen solventsmorphology engineering
Type
Article
Information
Journal of Materials Research , Volume 34 , Issue 14 , 28 July 2019 , pp. 2416 - 2424
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

b)

These authors contributed equally to this work.

References

Joint Research Centre: Available at: http://eC.europA.eu/jrc/eN. (accessed March 15, 2018).Google Scholar
Kojima, A., Teshima, K., Shirai, Y., and Miyasaka, T.: Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009).CrossRefGoogle ScholarPubMed
Yang, W.S., Park, B.W., Jung, E.H., Jeon, N.J., Kim, Y.C., Lee, D.U., Shin, S.S., Seo, J., Kim, E.K., and Noh, J.H.: Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science 356, 1376–1379 (2017).10.1126/science.aan2301CrossRefGoogle ScholarPubMed
Zhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C.R., Cimaroli, A.J., Guan, L., Ellingson, R.J., Zhu, K., Zhao, X., Xiong, R-G., and Yan, Y.: Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells. Nat. Energy 2, 17018 (2017).CrossRefGoogle Scholar
Bu, T., Wu, L., Liu, X., Yang, X., Zhou, P., Yu, X., Qin, T., Shi, J., Wang, S., and Li, S.: Synergic interface optimization with green solvent engineering in mixed perovskite solar cells. Adv. Energy Mater. 7, 1700576 (2017).CrossRefGoogle Scholar
Li, S., Zhang, P., Wang, Y., Sarvari, H., Liu, D., Wu, J., Yang, Y., and Wang, Z.: Interface engineering of high efficiency perovskite solar cells based on ZnO nanorods using atomic layer deposition. Nano Res. 10, 1092–1103 (2017).CrossRefGoogle Scholar
Zhang, P., Wu, J., Zhang, T., Wang, Y., Liu, D., Chen, H., Ji, L., Liu, C., Ahmad, W., and Chen, Z.D.: Perovskite solar cells with ZnO electron-transporting materials. Adv. Mater. 30, 1703737 (2018).CrossRefGoogle ScholarPubMed
Tavakoli, M.M., Tavakoli, R., Nourbakhsh, Z., Waleed, A., Virk, U.S., and Fan, Z.: High efficiency and stable perovskite solar cell using ZnO/rGO QDs as an electron transfer layer. Adv. Mater. Interfaces 3, 1500790 (2016).CrossRefGoogle Scholar
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., and Nazeeruddin, M.K.: High-performance perovskite solar cells with enhanced environmental stability based on amphiphile-modified CH3NH3PbI3. Adv. Mater. 28, 2910–2915 (2016).CrossRefGoogle Scholar
Zheng, L., Zhang, D., Ma, Y., Lu, Z., Chen, Z., Wang, S., Xiao, L., and Gong, Q.: Morphology control of the perovskite films for efficient solar cells. Dalton Trans. 44, 10582–10593 (2015).CrossRefGoogle ScholarPubMed
Wang, Y., Liu, D., Zhang, P., Zhang, T., Ahmad, W., Ying, X., Wang, F., Li, J., Chen, L., and Wu, J.: Reveal the growth mechanism in perovskite films via weakly coordinating solvent annealing. Sci. China Mater. 61, 1536–1548 (2018).CrossRefGoogle Scholar
Wang, Y., Zhang, T., Zhang, P., Liu, D., Ji, L., Chen, H., Chen, Z.D., Wu, J., and Li, S.: Solution processed PCBM-CH3NH3PbI3 heterojunction photodetectors with enhanced performance and stability. Org. Electron. 57, 263–268 (2018).CrossRefGoogle Scholar
Zhang, T., Wu, J., Zhang, P., Waseem, A., Wang, Y., Mahdi, A., Chen, H., Gao, C., Chen, Z.D., Wu, Z., and Li, S.: High speed and stable solution-processed triple cation perovskite photodetectors. Adv. Opt. Mater. 6, 1701341 (2018).CrossRefGoogle Scholar
Xiao, Z., Kerner, R.A., Zhao, L., Tran, N.L., Lee, K.M., Koh, T.W., Scholes, G.D., and Rand, B.P.: Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites. Nat. Photonics 11, 108 (2017).CrossRefGoogle Scholar
Liu, M., Johnston, M.B., and Snaith, H.J.: Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501, 395 (2013).10.1038/nature12509CrossRefGoogle ScholarPubMed
Wu, Y., Li, F., Han, C., Wang, X., Li, H., Cai, M., Zhou, Z., Noda, T., and Han, L.: Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering. Adv. Mater. 29, 1701073 (2017).CrossRefGoogle ScholarPubMed
Burschka, J., Pellet, N., Moon, S.J., Humphrybaker, R., Gao, P., Nazeeruddin, M.K., and Grätzel, M.: Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316 (2013).10.1038/nature12340CrossRefGoogle ScholarPubMed
Liu, Y., Zhang, Y., Yang, Z., Yang, D., Ren, X., Pang, L., and Liu, S.F.: Thinness-and shape-controlled growth for ultrathin single-crystalline perovskite wafers for mass production of superior photoelectronic devices. Adv. Mater. 28, 9204–9209 (2016).CrossRefGoogle ScholarPubMed
Wang, Y., Li, S., Zhang, P., Liu, D., Gu, X., Sarvari, H., Ye, Z., Wu, J., Wang, Z., and Chen, Z.D.: Solvent annealing of PbI2 for the high-quality crystallization of perovskite films for solar cells with efficiencies exceeding 18%. Nanoscale 8, 19654–19661 (2016).CrossRefGoogle ScholarPubMed
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A.M., and Yao, Y.: Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells. Nanoscale 7, 10595–10599 (2015).CrossRefGoogle ScholarPubMed
Manda, X., Fuzhi, H., Wenchao, H., Yasmina, D., Ye, Z., Joanne, E., Angus, G.W., Udo, B., Yi Bing, C., and Leone, S.: A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. Angew. Chem., Int. Ed. 53, 9898–9903 (2014).Google Scholar
Paek, S., Schouwink, P., Athanasopoulou, E.N., Cho, K.T., Grancini, G., Lee, Y., Zhang, Y., Stellacci, F., Nazeeruddin, M.K., and Gao, P.: From Nano- to micrometer scale: The role of antisolvent treatment on high performance perovskite solar cells. Chem. Mater. 29, 3490–3498 (2017).CrossRefGoogle Scholar
Wang, Y., Wu, J., Zhang, P., Liu, D., Zhang, T., Ji, L., Gu, X., Chen, Z.D., and Li, S.: Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells. Nano Energy 39, 616–625 (2017).CrossRefGoogle Scholar
Pathak, S.K., Sepe, A., Sadhanala, A., Deschler, F., Haghighirad, A., Sakai, N., Goedel, K.C., Stranks, S.D., Noel, N.K., and Price, M.: Atmospheric influence upon crystallization and electronic disorder and its impact on the photo-physical properties of organic–inorganic perovskite solar cells. ACS Nano 9, 2311–2320 (2015).CrossRefGoogle Scholar
Chen, J., Xiong, Y., Rong, Y., Mei, A., Sheng, Y., Jiang, P., Hu, Y., Li, X., and Han, H.: Solvent effect on the hole-conductor-free fully printable perovskite solar cells. Nano Energy 27, 130–137 (2016).CrossRefGoogle Scholar
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S.S., Ma, T., and Hayase, S.: All-solid perovskite solar cells with HOCO–R–NH3+I− anchor-group inserted between porous titania and perovskite. J. Phys. Chem. C 118, 16651–16659 (2014).CrossRefGoogle Scholar
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., and Chen, H.: Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer. J. Am. Chem. Soc. 137, 2674–2679 (2015).CrossRefGoogle ScholarPubMed
Shih, Y.C., Lan, Y.B., Li, C.S., Hsieh, H.C., Wang, L., Wu, C.I., and Lin, K.F.: Amino-acid-induced preferential orientation of perovskite crystals for enhancing interfacial charge transfer and photovoltaic performance. Small 13, 1604305 (2017).CrossRefGoogle ScholarPubMed
Dong, J., Xu, X., Shi, J., Li, D., Luo, Y., Meng, Q., and Chen, Q.: Suppressing charge recombination in ZnO-nanorod-based perovskite solar cells with atomic-layer-deposition TiO2. Chin. Phys. Lett. 32, 078401 (2015).CrossRefGoogle Scholar