Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-28T15:31:09.218Z Has data issue: false hasContentIssue false
  • English
  • Français

Polymer-bonded magnets: Part I. Analytic thermogravimetry to determine the effect of surface modification on dispersion of Nd–Fe–B fillers

Published online by Cambridge University Press:  31 January 2011

Jun Xiao  and
Joshua U. Otaigbe
Jun Xiao
Affiliation:
Department of Materials Science and Engineering, Iowa State University of Science and Technology, Ames, IA 50011
Joshua U. Otaigbe*
Affiliation:
Department of Materials Science and Engineering and Department of Chemical Engineering, Iowa State University of Science and Technology, Ames, IA 50011
*
a) Address all correspondence to this author.
Get access

Abstract

The degree of mixing is a critical factor in controlling the magnetic properties and mechanical properties of polymer-bonded magnets. Pretreatment of the NdFeB fillers with a silane coupling agent improved the degree of mixing of the fillers in the polymer matrix. The observed improvement in the degree of mixing of the silanetreated fillers was ascribed to good wetting as evidenced by viscosity reduction of the coupled polymer-bonded magnets. However, traditional materials characterization methods could not be used to quantitatively determine the degree of mixing of the polymer-bonded magnets. This paper describes use of thermogravimetric analysis to quantify the degree of mixing of polymer-bonded magnets. The intensity of segregation of the fillers was calculated from the measured weight change of the magnetic filler in the samples. The results of this work showed that the thermogravimetric analysis method was useful in determining the degree of mixing of NdFeB fillers in polymer-bonded magnets.

Type
Articles
Information
Journal of Materials Research , Volume 14 , Issue 7 , July 1999 , pp. 2893 - 2896
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Ormerod, J. and Constantinides, S., J. Appl. Phys. 81, 4816 (1997).CrossRefGoogle Scholar
2.Dynamag, S.B., Eng. Mater. Design 6, 18 (1998).Google Scholar
3.Furuya, T., J. Electron. Eng. 10, 37 (1993).Google Scholar
4.Rothon, R., Particulate-Filled Polymer Composites (Longman Scientific & Technical, Ames, IA, 1995).Google Scholar
5.Danckwerts, P.V., Appl. Sci. Res. A3, 279 (1952).CrossRefGoogle Scholar
6.Matthews, G., Polymer Mixing Technology (Applied Scientific Publishers, 1982).Google Scholar
7.Otaigbe, J.U., Xiao, J., Kim, H.S., and Constantinides, S., J. Mater. Sci. Lett. 18(4), (1999, in press); U.S. Patent pending (1998).Google Scholar
8.Camp, F.E. and Kim, A.S., J. Appl. Phys. 70(10), 6348 (1991).Google Scholar
9.Kim, A.S., Camp, F.E., and Lizzi, T., J. Appl. Phys. 79, 4840 (1996).Google Scholar
10.Organofunctional Silanes (Union Carbide Chemicals and Plastics, Ames, IA, 1991).Google Scholar
11.Xiao, J., Kim, H., Otaigbe, J.U., and Tacke, T., SPE-ANTEC '99 Technical Papers 55, 1337 (1999).Google Scholar
12.Plueddemann, E.P., Silane Coupling Agents (Plenum Press, 1982).Google Scholar
13.Han, C.D., Multiphase Flow in Polymer Processing (Academic Press, 1981).Google Scholar