Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-28T00:09:52.393Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural evolution of electrodes in the NCR and CGR cathode-containing commercial lithium-ion batteries cycled between 3.0 and 4.5 V: An operando neutron powder-diffraction study

Published online by Cambridge University Press:  28 October 2014

Wei Kong Pang ,
Moshiul Alam ,
Vanessa K. Peterson  and
Neeraj Sharma Open the ORCID record for Neeraj Sharma [Opens in a new window]
Wei Kong Pang*
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, New South Wales 2232, Australia; and School of Mechanical, Materials, and Mechatronic Engineering, Institute for Superconducting & Electronic Materials, Faculty of Engineering, University of Wollongong, New South Wales 2522, Australia
Moshiul Alam
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, New South Wales 2232, Australia; and School of Chemistry, UNSW Australia, Sydney, New South Wales 2052, Australia
Vanessa K. Peterson*
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, New South Wales 2232, Australia
Neeraj Sharma
Affiliation:
School of Chemistry, UNSW Australia, Sydney, New South Wales 2052, Australia
*
a)Address all correspondence to these authors. e-mail: pwk1980@yahoo.com
b)e-mail: Vanessa.Peterson@ansto.gov.au
Get access

Abstract

The dissimilar lattice-evolution of the isostructural layered Li(Ni,Co,Al)O2 (NCR) and Li(Ni,Co,Mn)O2 (CGR) cathodes in commercial lithium-ion batteries during overcharging/discharging was examined using operando neutron powder-diffraction. The stacking axis (c parameter) of both cathodes expands on initial lithiation and contracts on further lithiation. Although both the initial increase and later decrease are smaller for the CGR cathode, the overall change between battery charged and discharged states of the c parameter is larger for the CGR (1.29%) than for the NCR cathode (0.33%). We find these differences are correlated to the transition metal to oxygen bond (as measured through the oxygen positional-parameter) which is specific to the different cathode chemistries. Finally, we note the formation of and suggest a model for a LiCx intermediate between graphite and LiC12 in the anode of both batteries.

Keywords

energy storageneutron scatteringcrystallographic structure
Type
Articles
Information
Journal of Materials Research , Volume 30 , Issue 3: Focus Issue: In-situ and Operando Characterization of Materials , 14 February 2015 , pp. 373 - 380
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Tarascon, J.M. and Armand, M.: Issues and challenges facing rechargeable lithium batteries. Nature 414(6861), 359 (2001).Google Scholar
Berthelot, R., Carlier, D., and Delmas, C.: Electrochemical investigation of the P2–NaxCoO2 phase diagram. Nat. Mater. 10(1), 74 (2011).CrossRefGoogle ScholarPubMed
Nishi, Y.: Lithium ion secondary batteries; past 10 years and the future. J. Power Sources 100(1–2), 101 (2001).Google Scholar
Padhi, A.K., Nanjundaswamy, K.S., and Goodenough, J.B.: Phospho olivines as positive electrode materials for rechargeable lithium batteries. J. Electrochem. Soc. 144(4), 1188 (1997).Google Scholar
Thackeray, M.M., de Kock, A., Rossouw, M.H., Liles, D., Bittihn, R., and Hoge, D.: Spinel electrodes from the Li-Mn-O system for rechargeable lithium battery applications. J. Electrochem. Soc. 139, 363 (1992).Google Scholar
Dolotko, O., Senyshyn, A., Mühlbauer, M.J., Nikolowski, K., and Ehrenberg, H.: Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction. J. Power Sources 255(0), 197 (2014).Google Scholar
Yabuuchi, N. and Ohzuku, T.: Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries. J. Power Sources 119–121(0), 171 (2003).Google Scholar
Amatucci, G.G., Tarascon, J.M., and Klein, L.C.: CoO2, the end member of the LixCoO2 solid solution. J. Electrochem. Soc. 143(3), 1114 (1996).Google Scholar
Shi, S.J., Mai, Y.J., Tang, Y.Y., Gu, C.D., Wang, X.L., and Tu, J.P.: Preparation and electrochemical performance of ball-like LiMn0.4Ni0.4Co0.2O2 cathode materials. Electrochim. Acta 77(0), 39 (2012).Google Scholar
Kim, H-S., Kim, K-T., and Periasamy, P.: Synthesis and electrochemical performances of LiNi0.4Mn0.4Co0.2O2 cathode material for lithium rechargeable battery. Electronic Mater. Lett. 2(2), 119 (2006).Google Scholar
Idris, M.S. and West, A.R.: The effect on cathode performance of oxygen non-stoichiometry and interlayer mixing in layered rock salt LiNi0.8Mn0.1Co0.1O2-δ. J. Electrochem. Soc. 159(4), A396 (2012).Google Scholar
Hu, G., Liu, W., Peng, Z., Du, K., and Cao, Y.: Synthesis and electrochemical properties of LiNi0.8Co0.15Al0.05O2 prepared from the precursor Ni0.8Co0.15Al0.05OOH. J. Power Sources 198(0), 258 (2012).Google Scholar
Yin, S.C., Rho, Y.H., Swainson, I., and Nazar, L.F.: X-ray/neutron diffraction and electrochemical studies of lithium De/Re-intercalation in Li1-xCo1/3Ni1/3Mn1/3O2 (x = 0 → 1). Chem. Mater. 18(7), 1901 (2006).Google Scholar
Alam, M., Hanley, T., Pang, W.K., Peterson, V.K., and Sharma, N.: Comparison of the so-called CGR and NCR cathodes in commercial lithium-ion batteries using in situ neutron powder diffraction. Powder Diffr. (2014, in press).Google Scholar
Pang, W.K., Peterson, V.K., Sharma, N., Shiu, J-J., and Wu, S-H.: Lithium migration in Li4Ti5O12 studied using in situ neutron powder diffraction. Chem. Mater. 26(7), 2318 (2014).CrossRefGoogle Scholar
Pang, W.K., Sharma, N., Peterson, V.K., Shiu, J-J., and Wu, S-H.: In situ neutron diffraction study of the simultaneous structural evolution of a LiNi0.5Mn1.5O4 cathode and a Li4Ti5O12 anode in a LiNi0.5Mn1.5O4||Li4Ti5O12 full cell. J. Power Sources 246(0), 464 (2014).Google Scholar
Shu, J.: Study of the interface between Li4Ti5O12 electrodes and standard electrolyte solutions in 0.0-5.0 V. Electrochem. Solid-State Lett. 11(12), A238 (2008).Google Scholar
Palomares, V., Goni, A., Iturrondobeitia, A., Lezama, L., de Meatza, I., Bengoechea, M., and Rojo, T.: Structural, magnetic and electrochemical study of a new active phase obtained by oxidation of a LiFePO4/C composite. J. Mater. Chem. 22(11), 4735 (2012).Google Scholar
Armand, M. and Tarascon, J.M.: Building better batteries. Nature 451, 652 (2008).Google Scholar
Sharma, N. and Peterson, V.K.: Overcharging a lithium-ion battery: Effect on the LixC6 negative electrode determined by in situ neutron diffraction. J. Power Sources 244(0), 695 (2013).Google Scholar
Dolotko, O., Senyshyn, A., Mühlbauer, M.J., Nikolowski, K., Scheiba, F., and Ehrenberg, H.: Fatigue process in Li-ion Cells: An in situ combined neutron diffraction and electrochemical study. J. Electrochem. Soc. 159(12), A2082 (2012).Google Scholar
Billaud, D., Henry, F.X., Lelaurain, M., and Willmann, P.: Revisited structures of dense and dilute stage II lithium-graphite intercalation compounds. J. Phys. Chem. Solids 57(6–8), 775 (1996).Google Scholar
Wang, X-L., An, K., Cai, L., Feng, Z., Nagler, S.E., Daniel, C., Rhodes, K.J., Stoica, A.D., Skorpenske, H.D., Liang, C., Zhang, W., Kim, J., Qi, Y., and Harris, S.J.: Visualizing the chemistry and structure dynamics in lithium-ion batteries by in-situ neutron diffraction. Sci. Rep. 2, 774 (2012).Google Scholar
Dahn, J.R., Fong, R., and Spoon, M.J.: Suppression of staging in lithium-intercalated carbon by disorder in the host. Phys. Rev. B. 42(10), 6424 (1990).Google Scholar
Guerard, D. and Herold, A.: Intercalation of lithium into graphite and other carbons. Carbon 13(4), 337 (1975).Google Scholar
Trucano, P. and Chen, R.: Structure of graphite by neutron diffraction. Nature 258(5531), 136 (1975).Google Scholar
Woo, K.C., Kamitakahara, W.A., DiVincenzo, D.P., Robinson, D.S., Mertwoy, H., Milliken, J.W., and Fischer, J.E.: Effect of in-plane density on the structural and elastic properties of graphite intercalation compounds. Phys. Rev. Lett. 50(3), 182 (1983).Google Scholar
Qi, Y., Guo, H., Hector, L.G., and Timmons, A.: Threefold increase in the Young’s modulus of graphite negative electrode during lithium intercalation. J. Electrochem. Soc. 157(5), A558 (2010).Google Scholar
Harris, S.J., Timmons, A., Baker, D.R., and Monroe, C.: Direct in situ measurements of Li transport in Li-ion battery negative electrodes. Chem. Phys. Lett. 485(4–6), 265 (2010).Google Scholar
Same, A., Battaglia, V., Tang, H-Y., and Park, J.W.: In situ neutron radiography analysis of graphite/NCA lithium-ion battery during overcharge. J. Appl. Electrochem. 42, 1 (2012).Google Scholar
Studer, A.J., Hagen, M.E., and Noakes, T.J.: Wombat: The high-intensity powder diffractometer at the OPAL reactor. Physica B 385–386, Part 2, 1013 (2006).Google Scholar
Richard, D., Ferrand, M., and Kearley, G.J.: Large array manipulation program. J. Neutron Res. 4, 33 (1996).Google Scholar
Van der Ven, A., Aydinol, M.K., Ceder, G., Kresse, G., and Hafner, J.: First-principles investigation of phase stability in LixCoO2. Phys. Rev. B 58(6), 2975 (1998).Google Scholar
Laubach, S., Laubach, S., Schmidt, P.C., Ensling, D., Schmid, S., Jaegermann, W., Thißen, A., Nikolowski, K., and Ehrenberg, H.: Changes in the crystal and electronic structure of LiCoO2 and LiNiO2 upon Li intercalation and de-intercalation. Phys. Chem. Chem. Phys. 11(17), 3278 (2009).Google Scholar
Sharma, N., Peterson, V.K., Elcombe, M.M., Avdeev, M., Studer, A.J., Blagojevic, N., Yusoff, R., and Kamarulzaman, N.: Structural changes in a commercial lithium-ion battery during electrochemical cycling: An in situ neutron diffraction study. J. Power Sources 195(24), 8258 (2010).Google Scholar
Supplementary material: File

Pang supplementary material

Supplementary tables and figures

Download Pang supplementary material(File)
File 1.6 MB