Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-10T13:37:26.677Z Has data issue: false hasContentIssue false
  • English
  • Français

Forced Convection Enhancement Over Heated Blocks by Using Slot-Jet

Published online by Cambridge University Press:  23 September 2019

H. Amirat  and
A. Korichi Open the ORCID record for A. Korichi [Opens in a new window]
H. Amirat
Affiliation:
Laboratory of Mechanics, Physics and Mathematical Modeling (LMP2M) University of Medea Medea, Algeria
A. Korichi*
Affiliation:
Laboratory of Mechanics, Physics and Mathematical Modeling (LMP2M) University of Medea Medea, Algeria
*
*Corresponding author (ab_korichi@yahoo.fr)
Get access

Abstract

Numerical simulations of convective fluid flow and heat transfer in a channel containing heated blocks with slot-jet behind the blocks are performed. The finite volume method with the simple algorithm is adopted and Ansys Fluent © CFD commercial code is used. The effect of slot-jet on flow structure and heat transfer modification is examined. The incidence of influent parameters such as slot-jet position, relative inlet slot-jet velocity and Reynolds number value has been explored. The results show that both the main inlet velocity as well as the relative slot-jet velocity in addition to the slot position modifies the flow field, temperature contours and heat transfer rate.

Keywords

Electronic coolingfinite volume methodheated blocksheat transfer enhancement
Type
Research Article
Information
Journal of Mechanics , Volume 36 , Issue 1 , February 2020 , pp. 119 - 131
Copyright
Copyright © 2019 The Society of Theoretical and Applied Mechanics 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Davalath, J. and Bayazitoglu, Y., “Forced Convection Cooling Across Rectangular Blocks,” Journal of Heat Transfer, 109, pp. 321–328 (1987).CrossRefGoogle Scholar
Incropera, F. P., “Convection Heat Transfer in Electronic Equipment Cooling,” Journal of Heat Transfer, 110, pp. 1097–1111 (1988).CrossRefGoogle Scholar
Yeh, L. T., “Review of Heat Transfer Technologies in Electronic Equipment,” Journal of Electronic Packaging, 117, pp. 333–339 (1995).CrossRefGoogle Scholar
Young, T. J. and Vafai, K., “Convective flow and heat transfer in a channel containing multiple heated obstacles,” International Journal of Heat and Mass Transfer, 41, pp. 3279–3298 (1998a).CrossRefGoogle Scholar
Young, T. J. and Vafai, K., “Experimental and Numerical Investigation of Forced Convective Characteristics of Arrays of Channel Mounted Obstacles,” Journal of Heat Transfer, 121, pp. 34–42 (1999).CrossRefGoogle Scholar
Siddique, M., Khaled, A. R. A., Abdulhafiz, N. I. and Boukhary, A. Y., “Recent Advances in Heat Transfer Enhancements,” International Journal of Chemical Engineering, Article ID 106461, 28 pages (2010). http://dx.doi.org/10.1155/2010/106461CrossRefGoogle Scholar
Herman, C. and Kang, E., “Heat transfer enhancement in a grooved channel with curved vanes,” International Journal of Heat and Mass Transfer, 45, pp. 3741–3757 (2002).CrossRefGoogle Scholar
Lorenzini-Gutierrez, D., Hernandez-Guerrero, A., Luviano-Ortiz, J. L. and Leon-Conejo, J. C., “Numerical and experimental analysis of heat transfer enhancement in a grooved channel with curved flow deflectors,” Applied Thermal Engineering, 75, pp. 800–808 (2015).CrossRefGoogle Scholar
Luviano-Ortiz, L., Hernandez-Guerrero, A., Rubio-Arana, C. and Romero-Mendez, R., “Heat transfer enhancement in a horizontal channel by the addition of curved deflectors,” International Journal of Heat and Mass Transfer, 51, pp. 3972–3984 (2008).CrossRefGoogle Scholar
Herman, C. and Kang, E., “Comparative evaluation of three heat transfer enhancement strategies in a grooved channel,” Heat Mass Transfer, 37, pp. 563–575 (2001a).CrossRefGoogle Scholar
Herman, C. and Kang, E., “Experimental visualization of temperature field and study of heat transfer enhancement in oscillatory flow in a grooved channel,” Heat Mass Transfer, 37, pp. 87–99 (2001b).CrossRefGoogle Scholar
Mebarki, G., Rahal, S. and Hamza, A., “Heat Transfer Enhancement by Flow Control in a Rectangular Horizontal Channel,” International Journal of Materials, Mechanics and Manufacturing, 1, pp. 171–176 (2013).CrossRefGoogle Scholar
Perng, S.-W. and Wu, H.-W., “Numerical investigation of mixed convective heat transfer for unsteady turbulent flow over heated blocks in a horizontal channel,” International Journal of Thermal Sciences, 47, pp. 620–632 (2008).CrossRefGoogle Scholar
Perng, S.-W., Wu, H.-W. and Jue, T.-C., “Numerical investigation of heat transfer enhancement on a porous vortex-generator applied to a block-heated channel,” International Journal of Heat and Mass Transfer, 55, pp. 3121–3137 (2012).CrossRefGoogle Scholar
Wu, H.-W. and Perng, S.-W., “Effect of an oblique plate on the heat transfer enhancement of mixed convection over heated blocks in a horizontal channel,” International Journal of Heat and Mass Transfer, 42, pp. 1217–1235 (1999).CrossRefGoogle Scholar
Florio, L. A. and Harnoy, A., “Combination technique for improving natural convection cooling in electronics,” International Journal of Thermal Sciences, 46, pp. 76–92 (2007).CrossRefGoogle Scholar
Cheng, Y. P., Lee, T. S. and Low, H. T., “Numerical simulation of conjugate heat transfer in electronic cooling and analysis based on field synergy principle,” Applied Thermal Engineering, 28, pp. 1826–1833 (2008).CrossRefGoogle Scholar
Sultan, G. I., “Enhancing forced convection heat transfer from multiple protruding heat sources simulating electronic components in a horizontal channel by passive cooling,” Microelectronics Journal, 31, pp. 773–779 (2000).CrossRefGoogle Scholar
Ali, R. k., “Heat transfer enhancement from protruding heat sources using perforated zone between the heat sources,” Applied Thermal Engineering, 29, pp. 2766–2772 (2009).CrossRefGoogle Scholar
Kim, S. H. and Anand, N. K., “Use of slots to enhance forced convective cooling of between channels with surface-mounted heat sources,” Numerical Heat Transfer, Part A: Applications, 38, pp. 1–21 (2000).Google Scholar
Beig, S. A., Mirzakhalili, E. and Kowsari, F., “Investigation of optimal position of a vortex generator in a blocked channel for heat transfer enhancement of electronic chips,” International Journal of Heat and Mass Transfer, 54, pp. 4317–4324 (2011).CrossRefGoogle Scholar
Öztop, H. F., Varol, Y. and Alnak, D. E., “Control of heat transfer and fluid flow using a triangular bar in heated blocks located in a channel,” International Communications in Heat and Mass Transfer, 36, pp. 878–885 (2009).CrossRefGoogle Scholar
Korichi, A., Oufer, L. and Polidori, G., “Heat transfer enhancement in self-sustained oscillatory flow in a grooved channel with oblique plates,” International Journal of Heat and Mass Transfer, 52, pp. 1138–1148 (2009).CrossRefGoogle Scholar
Fu, W.-S. and Tong, B.-H., “Numerical investigation of heat transfer characteristics of the heated blocks in the channel with a transversely oscillating cylinder,” International Journal of Heat and Mass Transfer, 47, pp. 341–351 (2004).CrossRefGoogle Scholar
Yang, Y.-T. and Chen, C.-H., “Numerical simulation of turbulent fluid flow and heat transfer characteristics of heated blocks in the channel with an oscillating cylinder,” International Journal of Heat and Mass Transfer, 51, pp. 1603–1612 (2008).CrossRefGoogle Scholar
Moon, J. W., Kim, S. Y. and Cho, H. H., “Frequency-dependent heat transfer enhancement from rectangular heated block array in a pulsating channel flow,” International Journal of Heat and Mass Transfer, 48, pp. 4904–4913 (2005).CrossRefGoogle Scholar
Selimefendigil, F. and Öztop, H. F., “Numerical study and identification of cooling of heated blocks in pulsating channel flow with a rotating cylinder,” International Journal of Thermal Sciences, 79, pp. 132–145 (2014).CrossRefGoogle Scholar
Korichi, A. and Oufer, L., “Numerical heat transfer in a rectangular channel with mounted obstacles on upper and lower walls,” International Journal of Thermal Sciences, 44, pp. 644–655 (2005).CrossRefGoogle Scholar
Patankar, S. V., Numerical Heat Transfer and Fluid Flow, 1st Edition, CRC, New York, USA, (1980).Google Scholar
Young, T. J. and Vafai, K., “Convective cooling of a heated obstacle in a channel,” International Journal of Heat and Mass Transfer, 41, pp. 3131–3148 (1998b).CrossRefGoogle Scholar
Chen, X. and Han, P., “A note on the solution of conjugate heat transfer problems using SIMPLE-like algorithms,” International Journal of Heat and Fluid Flow, 21, pp. 463–467 (2000).CrossRefGoogle Scholar
McEntire, A. B. and Webb, B. W., “Local forced convective heat transfer from protruding and flush-mounted two-dimensional discrete heat sources,” International Journal of Heat and Mass Transfer, 33, pp. 1521–1533 (1990).CrossRefGoogle Scholar
Farhanieh, B., Herman, C. and Sunden, B., “Numerical and experimental analysis of laminar fluid flow and forced convection heat transfer in a grooved duct,” International Journal of Heat and Mass Transfer, 36, pp. 1609–1617 (1993).CrossRefGoogle Scholar
Nigen, J. S. and Amon, C. H., “Time-Dependent Conjugate Heat Transfer Characteristics of Self Sustained Oscillatory Flows in a Grooved Channel,” Journal of Fluids Engineering, 116, pp. 499–507 (1994).CrossRefGoogle Scholar
Arquis, E., Rady, M. A. and Nada, S. A., “Numerical investigation and parametric study of cooling an array of multiple protruding heat sources by a laminar slot air jet,” International Journal of Heat and Fluid Flow, 28, app. 787–805 (2007).CrossRefGoogle Scholar
Yang, M.-H., Yeh, R.-H. and Hwang, J.-J., “Forced convective cooling of a fin in a channel,” Energy Conversion and Management, 51, pp. 1277–1286 (2010).CrossRefGoogle Scholar
Imani, G., Maerefat, M. and Hooman, K., “Lattice Boltzmann Simulation of Conjugate Heat Transfer from Multiple Heated Obstacles Mounted in a Walled Parallel Plate Channel,” Numerical Heat Transfer, Part A: Applications, 62, pp. 798–821 (2012).Google Scholar