Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-25T18:06:23.426Z Has data issue: false hasContentIssue false
  • English
  • Français

Modal analysis of dielectric barrier discharge-based argon cold plasma jet

Published online by Cambridge University Press:  09 October 2020

G. Divya Deepak Open the ORCID record for G. Divya Deepak [Opens in a new window] ,
N. K. Joshi  and
Ram Prakash
G. Divya Deepak*
Affiliation:
Department of Mechanical Engineering, Alliance University, Anekal, Bangalore562106, India
N. K. Joshi
Affiliation:
Department of Nuclear Science and Technology, Mody University of Science and Technology, Lakshmangarh, Rajasthan32311, India
Ram Prakash
Affiliation:
Department of Physics, IIT, Jodhpur, Rajasthan342037, India
*
Author for correspondence: G. Divya Deepak, Department of Mechanical Engineering, Alliance University, Anekal, Bangalore562106, India. E-mail: divyadeepak77@gmail.com
Get access Rights & Permissions [Opens in a new window]

Abstract

In this study, an atmospheric pressure dielectric barrier discharge-based argon plasma jet has been modeled using COMSOL Multiphysics, which is based on the finite element method. The fluid dynamics and plasma modules of COMSOL Multiphysics code have been used for the modeling of the plasma jet. The plasma parameters, such as electron density, electron temperature, and electrical potential, have been examined by varying the electrical parameters, that is, supply voltage and supply frequency for both cases of static and with the flow of argon gas. The argon gas flow rate was fixed at 1 l/min. Ring electrode arrangement is subjected to a range of supply frequencies (10–25 kHz) and supply voltages (3.5–6 kV). The experimental results of the ring electrode configuration have been compared with the simulation analysis results. These results help in establishing an optimized operating range of the dielectric barrier discharge-based cold plasma jet in the glow discharge regime without arcing phenomenon. For the applied voltage and supply frequency parameters examined in this work, the discharge was found to be consistently homogeneous and displayed the characteristics of atmospheric pressure glow discharge.

Keywords

Atmospheric pressure plasma jetdielectric barrier dischargesupply frequencysupply voltage
Type
Research Article
Information
Laser and Particle Beams , Volume 38 , Issue 4 , December 2020 , pp. 229 - 238
Check for updates
Copyright
Copyright © The Author(s) 2020. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Becker, KH, Schoenbach, KH and Eden, JG (2006) Microplasmas and applications. Journal of Physics D: Applied Physics 39, R55.10.1088/0022-3727/39/3/R01CrossRefGoogle Scholar
Benhansour, M, Nikravech, M, Morvan, D, Amouroux, J and Chapelle, J (2004) Diagnostic by emission spectroscopy of an argon–hydrogen RF inductive thermal plasma for purification of metallurgical grade silicon. Journal of Physics D: Applied Physics 37, 2966.CrossRefGoogle Scholar
Chirokov, A, Gutsol, A and Fridman, A (2005) Atmospheric pressure plasma of dielectric barrier discharges. Pure and Applied Chemistry 77, 487.10.1351/pac200577020487CrossRefGoogle Scholar
Deng, XT, Shzi, JJ, Shama, and Kong, MG (2005) Effects of microbial loading and sporulation temperature on atmospheric plasma inactivation of Bacillus subtilis spores. Applied Physics Letters 87, 153901.10.1063/1.2103394CrossRefGoogle Scholar
Divya Deepak, G, Joshi, NK, Pal, U and Prakash, R (2016) Electrical characterization of atmospheric pressure dielectric barrier discharge-based cold plasma jet using ring electrode configuration. Laser and Particle Beams 34, 615.10.1017/S0263034616000501CrossRefGoogle Scholar
Divya Deepak, G, Joshi, NK, Kumar Pal, D and Prakash, R (2017) A low power miniaturized dielectric barrier discharge based atmospheric pressure plasma jet. Review of Scientific Instruments 88, 013505.10.1063/1.4974101CrossRefGoogle ScholarPubMed
Divya Deepak, G, Joshi, NK and Prakash, R (2018 a) Model analysis and electrical characterization of atmospheric pressure cold plasma jet in pin electrode configuration. AIP Advances 8, 055321.10.1063/1.5023072CrossRefGoogle Scholar
Divya Deepak, G, Joshi, NK, Prakash, R and Pal, U (2018 b) Electrical characterization of argon and nitrogen based cold plasma jet. The European Physical Journal Applied Physics 83, 20801.CrossRefGoogle Scholar
Duan, Y, Huang, C and Yu, Q (2005) Low-temperature direct current glow discharges at atmospheric pressure. IEEE Transactions on Plasma Science 33, 328.10.1109/TPS.2005.845893CrossRefGoogle Scholar
Eliasson, B and Kogelchatz, U (1991) Modeling and applications of silent discharge plasmas. IEEE Transactions on Plasma Science 19, 309.10.1109/27.106829CrossRefGoogle Scholar
Frame, JW, Wheeler, DJ, Detemple, TA and Eden, JG (1997) Microdischarge devices fabricated in silicon. Applied Physics Letters 71, 1165.10.1063/1.119614CrossRefGoogle Scholar
Gadkari, S, Tu, X and Gu, S (2017) Fluid model for a partially packed dielectric barrier discharge plasma reactor. Physics of Plasmas 24, 093510.10.1063/1.5000523CrossRefGoogle Scholar
Hagelaar, GJM and Pitchford, LC (2005) Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid models. Plasma Sources Science and Technology 14, 722.10.1088/0963-0252/14/4/011CrossRefGoogle Scholar
Honga, YC and Uhm, HS (2006) Microplasma jet at atmospheric pressure. Applied Physics Letters 89, 221504.CrossRefGoogle Scholar
Jeong, JY, Babayan, SE, Tu, VJ, Park, J, Henins, I, Hicks, RF and Selwyn, GS (1998) Etching materials with an atmospheric-pressure plasma jet. Plasma Sources Science and Technology 7, 282.10.1088/0963-0252/7/3/005CrossRefGoogle Scholar
Joh, HM, Kang, H, Chung, TH and Kim, S (2014) Electrical and optical characterization of atmospheric-pressure helium plasma jets generated with a pin electrode: effects of the electrode material, ground ring electrode, and zozzle shape. IEEE Transactions on Plasma Science 42, 3656.CrossRefGoogle Scholar
Kelly, S and Turner, M (2011) Fluid model of the 2D cross section of an AC driven plasma at atmospheric pressure 2011. In Proceeding of 30th International Conference on Phenomenon in Ionized Gases, National Centre for Plasma Science and Technology, Belfast UK, 28 August – 2 September 2011, Topic number B5.Google Scholar
Kim, H, Brockhaus, A and Engemann, J (2009) Atmospheric pressure argon plasma jet using a cylindrical piezoelectric transformer. Applied Physics Letters 95, 211501.CrossRefGoogle Scholar
Kim, K, Kim, G, Hong, YC and Yang, SS (2010) A cold micro plasma jet device suitable for bio-medical applications. Microelectronic Engineering 87, 1177.CrossRefGoogle Scholar
Kruger, CH, Owano, TG and Laux, CO (1997) Experimental investigation of atmospheric pressure nonequilibrium plasma chemistry. IEEE Transactions on Plasma Science 25, 1042.CrossRefGoogle Scholar
Lu, XP and Laroussi, M (2006) Dynamics of an atmospheric pressure plasma plume generated by submicrosecond voltage pulses. Journal of Applied Physics 100, 063302.10.1063/1.2349475CrossRefGoogle Scholar
Lu, XP, Jiang, ZH, Xiong, Q, Tang, ZY, Hu, XW and Pan, Y (2008) An 11 cm long atmospheric pressure cold plasma plume for applications of plasma medicine. Applied Physics Letters 92, 081502.10.1063/1.2883945CrossRefGoogle Scholar
Naidis, GV (2012) Modeling of helium plasma jets emerged into ambient air: influence of applied voltage, jet radius, and helium flow velocity on plasma jet characteristics. Journal of Applied Physics 112, 103304.CrossRefGoogle Scholar
Nie, QY, Ren, CS, Wang, DZ and Zhang, JL (2008) A simple cold Ar plasma jet generated with a floating electrode at atmospheric pressure. Applied Physics Letters 93, 011503.10.1063/1.2956411CrossRefGoogle Scholar
Pal, UN, Gulati, P, Kumar, N, Prakash, R and Srivastava, V (2012) Multiswitch equivalent electrical model to characterize coaxial DBD tube. IEEE Transactions on Plasma Science 40, 1356.10.1109/TPS.2012.2188308CrossRefGoogle Scholar
Radu, I, Bartnikas, R, Czeremuszkin, G and Wertheimer, MR (2003) Diagnostics of dielectric barrier discharges in noble gases: atmospheric pressure glow and pseudoglow discharges and spatio-temporal patterns. IEEE Transactions on Plasma Science 31, 411.10.1109/TPS.2003.811647CrossRefGoogle Scholar
Raizer, YP (1991) Gas Discharge Physics. Berlin, Germany: Springer-Verlag, p. 172.10.1007/978-3-642-61247-3CrossRefGoogle Scholar
Roth, JR, Nourgostar, S and Bonds, T (2007) The one atmosphere uniform glow discharge plasma (OAUGDP)—a platform technology for the 21st century. IEEE Transactions on Plasma Science 35, 233.CrossRefGoogle Scholar
Sakiyama, Y and Graves, DB (2006) Corona-glow transition in the atmospheric pressure RF-excited plasma needle. Journal of Physics D: Applied Physics 39, 3644.10.1088/0022-3727/39/16/018CrossRefGoogle Scholar
Schutze, , Jeong, JY, Babayan, SE, Park, JY, Selwyn, GS and Hicks, RF (1998) The atmospheric-pressure plasma jet: a review and comparison to other plasma sources. IEEE Transactions on Plasma Science 26, 1685.CrossRefGoogle Scholar
Selwyn, GS, Herrmann, HW, Park, J and Henins, I (2001) Materials processing using an atmospheric pressure, RF-generated plasma source. Contributions to Plasma Physics 41, 610.3.0.CO;2-L>CrossRefGoogle Scholar
Shashurin, A and Keidar, M (2015) Experimental approaches for studying non-equilibrium atmospheric plasma jets. Physics of Plasmas 22, 122002.10.1063/1.4933365CrossRefGoogle Scholar
Sladek, REJ, Stoffels, E, Walraven, R, Tielbeek, PEA and Koolhoven, RA (2004) Plasma treatment of dental cavities: a feasibility study. IEEE Transactions on Plasma Science 32, 1540.CrossRefGoogle Scholar
Stoffels, E, Flikweert, AJ, Stoffels, WW and Kroesen, GMW (2002) Plasma needle: a non-destructive atmospheric plasma source for fine surface treatment of (bio) materials. Plasma Sources Science and Technology 11, 383.10.1088/0963-0252/11/4/304CrossRefGoogle Scholar
Stoffels, E, Kieft, IE and Sladek, REJ (2003) Superficial treatment of mammalian cells using plasma needle. Journal of Physics D 37, 2966.Google Scholar
Tendero, C, Tixier, C, Tristant, P, Desmaison, J and Leprince, P (2006) Atmospheric pressure plasmas: a review. Spectraclinica Acta Part B: Atomic Spectroscopy 61, 2.CrossRefGoogle Scholar
Teschke, M, Kedzierski, J, Finantu-Dinu, E, Korzec, D and Engemann, J (2005) High-speed photographs of a dielectric barrier atmospheric pressure plasma jet. IEEE Transactions on Plasma Science 33, 310.CrossRefGoogle Scholar
Walsh, JL, Shi, JJ and Kong, MG (2006) Contrasting characteristics of pulsed and sinusoidal cold atmospheric plasma jets. Applied Physics Letters 88, 171501.CrossRefGoogle Scholar
Xu, X (2001) Dielectric barrier discharge — properties and applications. Thin Solid Films 390, 237.CrossRefGoogle Scholar
Xu, GM, Ma, Y and Zhang, GJ (2008) DBD plasma jet in atmospheric pressure argon. IEEE Transactions on Plasma Science 36, 1352.Google Scholar
Yi, H, Lu, NA, Jing, P, Jie, L and Yan, W (2013) Discharge characteristics of an atmospheric pressure argon plasma jet generated with screw ring-ring electrodes in surface dielectric barrier discharge. Plasma Science and Technology 15, 780.Google Scholar