Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-14T07:25:25.744Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of twist drill geometry on chip split with selfvibratory drilling head

Published online by Cambridge University Press:  23 April 2012

Olcay Önder ,
Henri Paris  and
Joël Rech
Olcay Önder*
Affiliation:
G-SCOP, 46 Av. Felix Viallet, 38041 Grenoble Cedex 1, France
Henri Paris
Affiliation:
G-SCOP, 46 Av. Felix Viallet, 38041 Grenoble Cedex 1, France
Joël Rech
Affiliation:
LTDS, 58 Av. Jean Parot, 42000 St Étienne, France
*
a Corresponding author: olcayonder@gmail.com
Get access

Abstract

In industrial area, drilling is one of the most commonly used machining operations. Today, conventional drilling methods have found their limits in deep hole drilling. To be able to push these limits, we have developed a new technology: vibratory drilling. The aim of this study is to determine the influence of the twist drill geometry on performance of the self vibratory drilling head. For that reason, it is necessary to identify the geometrical properties which have the strongest influence on axial vibrations of twist drill and on chip fragmentation. Moreover, we have also validated the experimental results by a simulator which can predict the behaviour of the self vibratory drilling head by taking into account geometrical defects of the tool.

Keywords

Drillingdrill geometryself-vibratory drillingchatterPerçagegéométrie du foretperçage vibratoire auto-entretenubroutement
Type
Research Article
Information
Mechanics & Industry , Volume 13 , Issue 1 , 2012 , pp. 11 - 16
Copyright
© AFM, EDP Sciences 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

El-Sonbaty, I., Khashaba, U.A., Machaly, T., Factors affecting the machinability of GFR/epoxy composites, Compos. Struct. 63 (2004) 329–338 CrossRefGoogle Scholar
Nalbant, M., Altin, A., Gokkaya, H., The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 super alloys, Materials and Design 28 (2007) 1334–1338 CrossRefGoogle Scholar
Paul, A., Kapoor, S.G., Devor, R., Chisel edge and cutting lip shape optimization for improved twist drill point design, Int. J. Machine Tools & Manuf. 45 (2005) 421–431 CrossRefGoogle Scholar
S.L. Ko, J.E. Chang, Development of drill geometry for burr minimization in drilling, school of mechanical and aerospace engineering, Konkuk University, Saoul Korea
Chen, W., Some experimental investigations in the drilling of carbon fibre-reinforced plastic (CFRP) composite laminates, Int. J. Machine Tools & Manuf. 37 (1997) 1097–1108 CrossRefGoogle Scholar
Hocheng, H., Tasao, C.C., Effects of special drill bits on drilling-induced delamination of composite materials, Int. J. Machine Tools & Manuf. 46 (2006) 1403–1416 CrossRefGoogle Scholar
Abrao, A.M., Campos, J.C., Faria, P.E., Davim, J.P., The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite, Materials and Design 29 (2008) 508–513 CrossRefGoogle Scholar
Velayudham, A., Krishnamurthy, R., Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites, J. Mater. Proc. Technol. 185 (2007) 204–209 CrossRefGoogle Scholar
Tichkiewitch, S., Moraru, G., Brun-Picard, D., Gouskov, A., Self-excited vibration drilling models and experiments, Annals of the CIRP 51 (2002) 311–314 CrossRefGoogle Scholar
Tichkiewitch, S., Paris, H., Peigne, G., Modelling the vibratory drilling process to foresee cutting parameters, Ann. CIRP 54 (2005) 367–370 Google Scholar
N. Guibert, Étude et modélisation des phénomènes de coupe sur les performances du forage vibratoire, Thèse de doctorat, Université Joseph Fourier, Grenoble 1, 2008
Y. Altintas, Manufacturing Automation (Cambridge University Press) 2000
N. Guibert, H. Paris, J. Rech, Influence of the chisel edge geometry on the vibratory drilling behaviour, In High Speed Machining Congress, San Sébastian, 2007
P. Naisson, J. Rech, L. Grenier, H. Paris, Influence du matériau pièce sur le domaine de fonctionnement du perçage vibratoire, 11e Colloque National AIP PRIMECA La Plagne, 22-24, 2009
Walter Machines Helicheck Plus http://www.walter-machines.com/fr/produits/mesure/helicheck-plus.html
Kistler Capteurs Dynanometers http://www.kistler.com/mediaaccess/9367C_000-613e-04.07.pdf
Ö.Olcay, Extension de la technique de perçage vibratoire à des matériaux difficiles à usiner et au domaine du décolletage, Thèse de doctorat, Université Joseph Fourier, Grenoble 1, 2011