Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-27T07:23:23.788Z Has data issue: false hasContentIssue false
  • English
  • Français

Modélisation de l'hétérogénéité dans les alliages à mémoirede forme

Published online by Cambridge University Press:  03 February 2006

Abdel Ilah Alhamany ,
Ouadi Mohammed Bensalah  and
Omar Fassi Fehri
Abdel Ilah Alhamany
Affiliation:
Université Hassan 1er, Faculté Sciences Technique Settat Département de physique, BP 577, Maroc
Ouadi Mohammed Bensalah
Affiliation:
Université Mohamed V, Faculté des Sciences, Rabat, Maroc
Omar Fassi Fehri
Affiliation:
Université Mohamed V, Faculté des Sciences, Rabat, Maroc
Get access

Abstract

Le modèle proposé s'inscrit dans le cadre d'une étude sur le comportement micromécanique métallurgique d'un alliage à mémoire de forme (AMF) Cu-Zn-Al durant la transformation martensitique et l'évolution microstructurale.Le modèle montre que la localisation de la déformation plastique après des sollicitations cycliques entraîne des modifications dans les propriétés mécaniques et thermiques. L'originalité du modèle permet de coupler entre les deux transformations de structures en montrant les mécanismes de déformation nécessaires lors des transformations.

Keywords

Martensitic transformationvariantplasticity dislocationsinternal stressescouplagemetallurgical thermomechanical potentialTransformation martensitiquevarianteplasticitédislocationscontraintes internescouplagepotentiel thermodynamique métallurgique
Type
Research Article
Information
Mechanics & Industry , Volume 6 , Issue 6: Special Issue , November 2005 , pp. 575 - 583
Copyright
© AFM, EDP Sciences, 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ortin, J., Planes, A., Thermodynamics of thermoelastic martensitic transformations, Acta Mettal. 37 (1989) 1433–1441 CrossRef
Ghazali, A., Bensalah, M.O., Agouram, S., Comportement thermomécanique des AMF mono et polycristallin en transformation martensitique, Int. J. thermal Sci. 10 (1999) 38
S. Leclercq, C. Lexellent, A general macroscopic description of the thermomechanical behavior of SMAs, J. Mech Solids A, 17 (1998) 185–205
Sun, Q.P., Hwang, K.C., Micromechanics modeling for the constitutive behavior of polycristalline SMAs-II study of the individual phenomena, J. Mech. Phys. Solids 41 (1993) 1–17 CrossRef
F. Auricchio, L. Faravelli, SMAs models and applications, CIMNE Barcelona (2001)
Patoor, E., Barbe, P., Eberhardt, A., Berveiller, M., Thermomechanical behavior of SMAs, Arch Mech. 40 (1988) 775–794
Thumann, M., Hrborgen, E., Thermal and Mechanical fatigue in SMAs, Z. Mettal kde 79 (1988) 119–126
Bo. Zhonghe, C. Dimitris, Lagoudas, Thermomechanical modeling of polycristalline SMAs under cyclic loading, Part III: evolution of plastic strains and two way shape memory effect, Int. J. Engineering Sci. 37 (1999) 1178–1203
C. Picornell, M. Sade, E. Cesari, Met. Trans A. 25 A (1994) 687–695
Rio-Jara, D., Guénin, G., On the characterization and origin of the dislocations associated with the two way memory effect in Cu-Zn-Al alloys, Scripta Metall. 35 (1987) 109–126
Pons, J., Lovey, F.C., Cesari, E., Electron-microscopy study of dislocation associated with thermal cycling in a CuZnAl shape memory alloys, Acta Metal Mater 38-12 (1990) 2733–2740 CrossRef
M. Benchiheub, S. Belkahla, G. Guénin, Étude de la stabilisation sous contrainte d'un alliage ternaire à mémoire de forme type Cu-Zn-Al, Revue de Métallurgie CIT/ Science et Génie des Matériaux (2000) 1471–1479
Tobushi, H., Okumara, K., Endo, M., Tanaka, K., Deformation behavior of TiNi SMA under or stress contolled conditions, Arch Mech. 54 (2002) 75–91
Agouram, S., Bensalah, M.O., Ghazali, A., Micomechanical modelling of the hysteresis behaviour in the thermally induced martensitic phase transitions, Acta Metall. Mater 1 47 (1999) 13–21 CrossRef
J.D. Eschelby, Proc. Roy. Soc. London A 241 (1957)
J.M.C. Li, Electron microscopy and Strength of Crystals., G. Thomas, Washbum (ed.), J. Intersciences. Pub. New York, 1963, pp. 713–776
R. Fletcher, 1969, Optimisation, Académie Press Inc., London
Sehitoglu, H., Anderssen, R., Karaman, I., Gall, K., Cyclic deformation behavior of single crystal NiTi, Materials Sciences and Engineering A 314 (2001) 67–74 CrossRef
C. Bouvet, de l'uniaxial au multiaxial: comportement pseudoélastique des AMF, Thèse de doctorat, Université de Franche-Comté, 2001
M.O. Bensalah, Thèse du 3e cycle, Metz, 1986
J. Muller, H. Xu, On the pseudo-elastic hysteresis, Acta Metall. Mat. 39(3) (1991) 263–271
J. Ortin, F. Preisach, modeling of hysteresis for a pseudo-elastic CuZnAl single crystal, J. Applied Physics 71(3) (1992) 1454–1461
Sato, Y., Tanaka, K., Estimation of energy dissipation in alloys due to stress induced martensitic transformation, Res. Mechanica 23 (1988) 381
Siredey, N., Eberhardt, A., Fatigue behaviour of CuAlBe Shape memory single crystals, Materials Sciences and Engineering A 290 (2000) 171–179 CrossRef
Dimitris, C., Lagoudas, Bo. Zhonghe, Thermomechanical modeling of polycristalline SMAs under cyclic loading, Part II material characterization and experimental results for a stable transformation cycle, Int. J. Engineering Sciences 37 (1999) 1141–1173