The mineralized structure of aligned collagen fibrils in a tilapia fish scale was investigated using transmission electron microscopy (TEM) techniques after a thin sample was prepared using aqueous techniques. Electron diffraction and electron energy loss spectroscopy data indicated that a mineralized internal layer consisting of aligned collagen fibrils contains hydroxyapatite crystals. Bright-field imaging, dark-field imaging, and energy-filtered TEM showed that the hydroxyapatite was mainly distributed in the hole zones of the aligned collagen fibrils structure, while needle-like materials composed of calcium compounds including hydroxyapatite existed in the mineralized internal layer. Dark-field imaging and three-dimensional observation using electron tomography revealed that hydroxyapatite and needle-like materials were mainly found in the matrix between the collagen fibrils. It was observed that hydroxyapatite and needle-like materials were preferentially distributed on the surface of the hole zones in the aligned collagen fibrils structure and in the matrix between the collagen fibrils in the mineralized internal layer of the scale.

The degradation of Sydney sandstone used to build the heritage St Mary's Cathedral in Sydney, Australia, has been investigated using environmental scanning electron microscopy combined with energy dispersive X-ray spectroscopy. This technique provided the structural details of the cementing clay and an elemental characterization the sandstone. The observed differences in the elemental composition of the unweathered and weathered sandstones were associated with changes to the clay microstructure upon weathering. The results support the substitution theory that Fe3+ replaces Al3+ in the kaolinite clay component upon weathering. An examination of the impurities present prior to a nonstructural iron removal treatment revealed the presence of minerals that may provide a source of the elements responsible for the substitution process.

Morphology of foliar trichomes was analyzed in Quercus variabilis by electron microscopy and three-dimensional surface profiling. Leaves from suppressed or dominant sprouts of the oak species were collected after a forest fire to unravel the effects of the disturbance factor on sprouting of the oak species. Scanning electron microscopy revealed two types of trichomes depending on the leaf surface. The trichomes on the adaxial surface were branched and constricted, and possessed a single row of thin-walled cells with a collapsed morphology (glandular branched uniseriate trichomes). Meanwhile, the trichomes on the abaxial surface were star-shaped, unfused with each other, and had 6 to 10 rays (nonglandular simple stellate trichomes). An apparent proliferation of trichomes was evident on the adaxial surface of the dominant sprouts. Uniseriate trichomes could be discernable as an elevation from the surface by white light scanning interferometry. By transmission electron microscopy, thin and convoluted cell wall, degenerated cytoplasm, and a single row of cells were characteristic of the trichomes on the adaxial surface. The thick cell walls of the mature trichomes on the abaxial surface represented the nonglandular nature. This is the first report on the morphological and ultrastructural characterization of foliar trichomes of the oak species.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

In recent years, novel ion sources have been designed and developed that have enabled focused ion beam machines to go beyond their use as nano-fabrication tools. Secondary electrons are usually taken to form images, for their yield is high and strongly dependent on the surface characteristics, in terms of chemical composition and topography. In particular, the secondary electron yield varies characteristically with the angle formed by the beam and the direction normal to the sample surface in the point of impact. Knowledge of this dependence, for different ion/atom pairs, is thus the first step toward a complete understanding of the contrast mechanism in scanning ion microscopy. In this article, experimentally obtained ion-induced secondary electron yields as a function of the incidence angle of the beam on flat surfaces of Al and Cr are reported, for usual conditions in Ga+ and He+ microscopes. The curves have been compared with models and simulations, showing a good agreement for most of the angle range; deviations from the expected behavior are addressed and explanations are suggested. It appears that the maximum value of the ion-induced secondary electron yield is very similar in all the studied cases; the yield range, however, is consistently larger for helium than for gallium, which partially explains the enhanced topographical contrast of helium microscopes over the gallium focused ion beams.

The M spectrum of the element uranium was reinvestigated by using both high-resolution wavelength dispersive (WD) spectrometry as well as energy dispersive (ED) spectrometry. Thereby we observed relative intensities that deviate from data in the literature. These discrepancies were not only observed for the weak U M lines but also for major lines. By measuring the Mα,β region of the spectrum with a PET crystal in second-order reflection, a sufficient energy resolution was achieved to separate Mα2 (M5N6) from Mα1 (M5N7). The intensity ratio I(M5N6)/I(M5N7) was determined to be approximately 5%, which is in strong contrast to the data tabulated by White and Johnson [White, E.W. & Johnson, G.G. (1970). X-Ray and Absorption Wavelengths and Two-Theta Tables. ASTM Data Series DS37A, 2nd ed. Philadelphia, PA: American Society for Testing and Materials]. Furthermore M5N7 was clearly observed as the strongest of the M lines that disagrees with data presented by Kleykamp [Kleykamp, H. (1981). Wavelengths of the M X-ray spectra of uranium, neptunium, plutonium, and americium. Z Naturforsch36a, 1388–1390], who reported Mβ (M4N6) as the strongest line. Also, after White and Johnson (1970), the line M2N4 should be more intense than M3O5 by a factor of 5. Both our WD and ED spectra show clearly that M3O5 is stronger than M2N4. Altogether, we observed in our WD spectra 26 M lines. In some cases untypical large differences between the line energies given by Bearden [Bearden, J.A. (1967). X-ray wavelengths. Rev Mod Phys39, 78–124] and measured by us were observed.

Using X-ray microscopy and spectromicroscopy, vascular smooth muscle cells (VSMCs) were imaged, prepared without using additional embedding material or staining, but by applying simple, noncryo fixation techniques. The cells were imaged with a compact source transmission X-ray microscope and a scanning transmission X-ray microscope (STXM). With the STXM, spectromicroscopy was performed at the C K-edge and the Ca LIII,II-edges. VSMCs were chosen because of their high amount of actin stress fibers, so that the actin cytoskeleton should be visible. Other parts of the cell, such as the nucleus and organelles, were also identified from the micrographs. Both in the spectra and the images, the effects of the different preparation procedures were observable. Furthermore, Ca hotspots were detected and their density is determined.

The determination of cell volumes and biomass offers a means of comparing the standing stocks of auto- and heterotrophic microbes of vastly different sizes for applications including the assessment of the flux of organic carbon within aquatic ecosystems. Conclusions about the importance of particular genotypes within microbial communities (e.g., of filamentous bacteria) may strongly depend on whether their contribution to total abundance or to biomass is regarded. Fluorescence microscopy and image analysis are suitable tools for determining bacterial biomass that moreover hold the potential to replace labor-intensive manual measurements by fully automated approaches. However, the current approaches to calculate bacterial cell volumes from digital images are intrinsically biased by the models that are used to approximate the morphology of the cells. Therefore, we developed a generic contour based algorithm to reconstruct the volumes of prokaryotic cells from two-dimensional representations (i.e., microscopic images) irrespective of their shape. Geometric models of commonly encountered bacterial morphotypes were used to verify the algorithm and to compare its performance with previously described approaches. The algorithm is embedded in a freely available computer program that is able to process both raw (8-bit grayscale) and thresholded (binary) images in a fully automated manner.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

In this article, a new scanning electron microscopy (SEM) image composition technique is described, which can significantly reduce drift related image corruptions. Drift distortion commonly causes blur and distortions in the SEM images. Such corruption ordinarily appears when conventional image-acquisition methods, i.e., “slow scan” and “fast scan,” are applied. The damage is often very significant; it may render images unusable for metrology applications, especially where subnanometer accuracy is required. The described correction technique works with a large number of quickly taken frames, which are properly aligned and then composed into a single image. Such image contains much less noise than the individual frames, while the blur and deformation is minimized. This technique also provides useful information about changes of the sample position in time, which may be applied to investigate the drift properties of the instrument without a need of additional equipment.

Transplantation of spermatogonial stem cells (SSCs), the male germline stem cells, in experimental animal models has been successfully used to study mechanisms involved in SSC self-renewal and to restore fertility. However, there are still many challenges associated with understanding the recipient immune response for SSCs use in clinical therapies. Here, we have undertaken a detailed structural study of macrophages elicited by SSCs transplantation in mice using both high-resolution light microscopy (HRLM) and transmission electron microscopy (TEM). We demonstrate that SSCs transplantation elicits a rapid and potent recruitment of macrophages into the seminiferous epithelium (SE). Infiltrating macrophages were derived from differentiation of peritubular monocyte-like cells into typical activated macrophages, which actively migrate through the SE, accumulate in the tubule lumen, and direct phagocytosis of differentiating germ cells and spermatozoa. Quantitative TEM analyses revealed increased formation of lipid bodies (LBs), organelles recognized as intracellular platforms for synthesis of inflammatory mediators and key markers of macrophage activation, within both infiltrating macrophages and Sertoli cells. LBs significantly increased in number and size in parallel to the augmented macrophage migration during different times post-transplantation. Our findings suggest that LBs may be involved with immunomodulatory mechanisms regulating the seminiferous tubule niche after SSC transplantation.

As the miniaturization of semiconductor devices continues, characterization of dopant distribution within the structures becomes increasingly challenging. One potential solution is the use of the secondary electron signal produced in scanning electron (SEMs) or helium ion microscopes (HeIMs) to image the changes in electrical potential caused by the dopant atoms. In this article, the contrast mechanisms and resolution limits of secondary electron dopant contrast are explored. It is shown that the resolution of the technique is dependent on the extent of electrical potential present at a junction and that the resolution of dopant contrast can be improved in the HeIM after an in-situ plasma cleaning routine, which causes an oxide to form on the surface altering the contrast mechanism from electrical potential to material contrast.

The application of palladium nanoparticles as electron-dense markers for labeling in both transmission and scanning electron microscopy requires their conjugation to a specific protein. The conjugation protocol described here includes the dihydrolipoic acid (DHLA) capping of Pd nanoparticles (8 nm equivalent diameter) and their subsequent covalent attachment to functional protein molecules such as streptavidin, protein A, or avidin. The single-step reaction was mediated using the cross-linking agent ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC). The final Pd conjugates were fully functional, as demonstrated by labeling of ultrathin resin sections of either bovine serum albumin or secretory granules of the salivary gland isolated from the partially fed female Ixodes ricinus tick. The results of bovine serum labeling were quantified, statistically evaluated, and compared with results obtained using commercially available gold particle conjugates (10 nm diameter). The highest values of labeling density were achieved using both streptavidin-Pd (106 ± 7 particles/μm2) and protein A-Au conjugates (130 ± 18 particles/μm2) compared to a commercial streptavidin-Au (66 ± 16 particles/μm2) and protein A-Pd conjugates (70 ± 11 particles/μm2). The concentrations of both DHLA and EDC, pH during conjugation, and finally thorough washing away of unbound proteins crucially influenced conjugation.

Following is a list of microscopy-related meetings and courses. The editors would greatly appreciate input to this list via the electronic submission form found in the MSA World-Wide Web page at www.msa.microscopy.com. We will gladly add hypertext links to the notice on the web and insert a listing of the meeting in the next issue of the Journal. Send comments and questions to Nan Yao, nyao@Princeton.edu.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.