Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Feinberg, Adam W.
and
Miller, Jordan S.
2017.
Progress in three-dimensional bioprinting.
MRS Bulletin,
Vol. 42,
Issue. 08,
p.
557.
Grosskopf, Abigail K.
Truby, Ryan L.
Kim, Hyoungsoo
Perazzo, Antonio
Lewis, Jennifer A.
and
Stone, Howard A.
2018.
Viscoplastic Matrix Materials for Embedded 3D Printing.
ACS Applied Materials & Interfaces,
Vol. 10,
Issue. 27,
p.
23353.
Kim, Min‐gu
Kim, Choongsoon
Alrowais, Hommood
and
Brand, Oliver
2018.
Multiscale and Uniform Liquid Metal Thin‐Film Patterning Based on Soft Lithography for 3D Heterogeneous Integrated Soft Microsystems: Additive Stamping and Subtractive Reverse Stamping.
Advanced Materials Technologies,
Vol. 3,
Issue. 7,
Zhang, Zhengyi
Jin, Yifei
Yin, Jun
Xu, Changxue
Xiong, Ruitong
Christensen, Kyle
Ringeisen, Bradley R.
Chrisey, Douglas B.
and
Huang, Yong
2018.
Evaluation of bioink printability for bioprinting applications.
Applied Physics Reviews,
Vol. 5,
Issue. 4,
Kabb, Christopher P.
O’Bryan, Christopher S.
Deng, Christopher C.
Angelini, Thomas E.
and
Sumerlin, Brent S.
2018.
Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing.
ACS Applied Materials & Interfaces,
Vol. 10,
Issue. 19,
p.
16793.
O’Bryan, Christopher S.
Bhattacharjee, Tapomoy
Marshall, Samantha L.
Gregory Sawyer, W.
and
Angelini, Thomas E.
2018.
Commercially available microgels for 3D bioprinting.
Bioprinting,
Vol. 11,
Issue. ,
p.
e00037.
Ionov, Leonid
2018.
4D Biofabrication: Materials, Methods, and Applications.
Advanced Healthcare Materials,
Vol. 7,
Issue. 17,
Moroni, Lorenzo
Boland, Thomas
Burdick, Jason A.
De Maria, Carmelo
Derby, Brian
Forgacs, Gabor
Groll, Jürgen
Li, Qing
Malda, Jos
Mironov, Vladimir A.
Mota, Carlos
Nakamura, Makoto
Shu, Wenmiao
Takeuchi, Shoji
Woodfield, Tim B.F.
Xu, Tao
Yoo, James J.
and
Vozzi, Giovanni
2018.
Biofabrication: A Guide to Technology and Terminology.
Trends in Biotechnology,
Vol. 36,
Issue. 4,
p.
384.
Urueña, Juan Manuel
Hart, Samuel M.
Hood, Derek L.
McGhee, Eric O.
Niemi, Sean R.
Schulze, Kyle D.
Levings, Padraic P.
Sawyer, W. Gregory
and
Pitenis, Angela A.
2018.
Considerations for Biotribometers: Cells, Gels, and Tissues.
Tribology Letters,
Vol. 66,
Issue. 4,
Shapira, Assaf
Noor, Nadav
Asulin, Masha
and
Dvir, Tal
2018.
Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering.
Applied Physics Reviews,
Vol. 5,
Issue. 4,
p.
041112.
Bhattacharjee, Tapomoy
and
Angelini, Thomas E
2019.
3D T cell motility in jammed microgels.
Journal of Physics D: Applied Physics,
Vol. 52,
Issue. 2,
p.
024006.
Herzberger, Jana
Sirrine, Justin M.
Williams, Christopher B.
and
Long, Timothy E.
2019.
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing.
Progress in Polymer Science,
Vol. 97,
Issue. ,
p.
101144.
Antill-O’Brien, Natasha
Bourke, Justin
and
O’Connell, Cathal D.
2019.
Layer-By-Layer: The Case for 3D Bioprinting Neurons to Create Patient-Specific Epilepsy Models.
Materials,
Vol. 12,
Issue. 19,
p.
3218.
Chiesa, Irene
Fortunato, Gabriele Maria
Lapomarda, Anna
Di Pietro, Licia
Biagini, Francesco
De Acutis, Aurora
Bernazzani, Luca
Tinè, Maria Rosaria
De Maria, Carmelo
and
Vozzi, Giovanni
2019.
Ultrasonic mixing chamber as an effective tool for the biofabrication of fully graded scaffolds for interface tissue engineering.
The International Journal of Artificial Organs,
Vol. 42,
Issue. 10,
p.
586.
O’Bryan, Christopher S.
Kabb, Christopher P.
Sumerlin, Brent S.
and
Angelini, Thomas E.
2019.
Jammed Polyelectrolyte Microgels for 3D Cell Culture Applications: Rheological Behavior with Added Salts.
ACS Applied Bio Materials,
Vol. 2,
Issue. 4,
p.
1509.
Nelson, Arif Z.
Schweizer, Kenneth S.
Rauzan, Brittany M.
Nuzzo, Ralph G.
Vermant, Jan
and
Ewoldt, Randy H.
2019.
Designing and transforming yield-stress fluids.
Current Opinion in Solid State and Materials Science,
Vol. 23,
Issue. 5,
p.
100758.
Highley, Christopher B.
2019.
3D Bioprinting in Medicine.
p.
1.
Scotti, Andrea
Denton, Alan R.
Brugnoni, Monia
Houston, Judith E.
Schweins, Ralf
Potemkin, Igor I.
and
Richtering, Walter
2019.
Deswelling of Microgels in Crowded Suspensions Depends on Cross-Link Density and Architecture.
Macromolecules,
Vol. 52,
Issue. 11,
p.
3995.
Kharel, Prabhuti
Somasekhar, Likitha
Vecheck, Amy
and
Mitra, Kunal
2019.
Self-Contained Three-Dimensional Bioprinter for Applications in Cardiovascular Research.
Journal of Medical Devices,
Vol. 13,
Issue. 3,
Castaño, Albert G
García-Díaz, María
Torras, Núria
Altay, Gizem
Comelles, Jordi
and
Martínez, Elena
2019.
Dynamic photopolymerization produces complex microstructures on hydrogels in a moldless approach to generate a 3D intestinal tissue model.
Biofabrication,
Vol. 11,
Issue. 2,
p.
025007.