Hostname: page-component-6bf8c574d5-w79xw Total loading time: 0 Render date: 2025-02-22T17:10:39.090Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Bottom Electrodes on Structural and Electrical Properties of Laser Ablated SrBi2Ta2O9 Thin Films

Published online by Cambridge University Press:  17 March 2011

Rasmi R. Das ,
W. Pérez ,
P. Bhattacharya  and
Ram. S. Katiyar
Rasmi R. Das
Affiliation:
Department of Physics, University of Puerto Rico, San Juan PR 00931-3343, USA
W. Pérez
Affiliation:
Department of Physics, University of Puerto Rico, San Juan PR 00931-3343, USA
P. Bhattacharya
Affiliation:
Department of Physics, University of Puerto Rico, San Juan PR 00931-3343, USA
Ram. S. Katiyar
Affiliation:
Department of Physics, University of Puerto Rico, San Juan PR 00931-3343, USA
Get access

Abstract

We have grown SrBi2Ta2O9 (SBT) thin films on various bottom electrodes such as Pt/TiO2/SiO2/Si (Pt) and LaNiO3/Pt/TiO2/SiO2/Si (LNO) substrates. The substrate temperature and oxygen pressure for the SBT film was maintained at 500 °C and 200 mTorr. As-grown films were post-annealed at a temperature of 800 °C. X-ray diffraction studies revealed that as-grown films were amorphous and crystallized to single phase after annealing. The difficulty of obtaining lowest Raman modes of SBT on platinized silicon substrate was overcome by using conducting oxide electrodes. Films grown on platinized silicon showed maximum value of remanent polarization (2Pr ∼ 21.5 μC/cm2) with coercive field (Ec) of ∼ 67 kV/cm. The degradation of ferroelectric properties of the films was observed with the introduction of 50 nm conducting LaNiO3 electrode at the interface of Pt and SBT film, which was attributed to high resistivity of the oxide electrode layers. Leakage current density was studied with the consideration of the Schottky emission model. The barrier height of the films grown on Pt and LNO were estimated to be 1.27 eV and 1.12 eV, respectively. The reduction of barrier height was attributed to the lower work function of the LNO electrode.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 688: Symposium C – Ferroelectric Thin Films X , 2001 , C4.11.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Araujo, C.A. Paz de, Cuchiaro, J.D., McMillan, L.D., Scott, M.C. and Scott, J. F., Nature (London) 374, 627 (1995).Google Scholar
2. Subbarao, E.C., J. Phys. Chem. Solids, 23, 665 (1962).Google Scholar
3. Hu, G.D., Wilson, I. H., Xu, J. B., Li, C. P. and Wong, S. P., Appl. Phys. Lett., 76, 1758 (2000).Google Scholar
4. Shin, W., Yoon, S. Appl. Phys. Lett., 79, 1519 (2001).Google Scholar
5. Warren, W.L., Dimos, D., Pike, G. E., Tuttle, B.A., Raymond, M.V., Ramesh, R. and Evans, J.T. Jr., Appl. Phys. Lett., 67, 866 (1995).Google Scholar
6. Dietz, G., Schumacher, M., Waser, R., Streiffer, S. K., Basceri, C. and Kingon, A.I., J. Appl. Phys, 82, 2359 (1997).Google Scholar
7. Sze, S.M., Physics of Semiconductor Devices (Wiley, New York, 1981).Google Scholar
8. Seong, N., Yang, C., Shin, W. and Yoon, S., Appl. Phys. Lett., 72, 1374 (1998).Google Scholar
9. Watanabe, K., Hartmann, A.J., Lamb, R.N. and Scott, J. F., J. Appl. Phys, 84, 2170 (1998).Google Scholar