Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-10T17:09:57.305Z Has data issue: false hasContentIssue false
  • English
  • Français

Enhanced response characteristics of SnO2-ZnO hetrostructures loaded with nanoscale catalyst clusters for methane gas detection

Published online by Cambridge University Press:  23 August 2012

Divya Haridas  and
Vinay Gupta
Divya Haridas
Affiliation:
Keshav Mahavidyalaya, Pitampura, University of Delhi, India
Vinay Gupta
Affiliation:
Dept. of Physics and Astrophysics,University of Delhi, Delhi, India
Get access

Abstract

Methane is an important explosive gas, used extensively at the domestic and industrial sites. It is the main constituent of natural gas, which is the main fuel supplied to homes and industries including automobiles. Detection of trace level of methane gas is very important to avoid any accidental explosion due to its leakage and may cause loss of valuable human life and property. The present paper is focused on the development of new sensing material in the form of composites to improve sensitivity, selectivity and stability. Present work shows the enhanced response of SnO2-ZnO composite structures for methane sensing and further increases its sensing response by loading appropriate catalyst on the sensor surface keeping in view of Fermi energy control mechanism and spillover mechanism. A stable sensor response of 77-85 % was obtained for SnO2-ZnO-Pd sensor structure over a wider range of temperature (160-260oC).

Keywords

catalyticmethanesensor
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1454: Symposium HH – Nanocomposites, Nanostructures and Heterostructures of Correlated Oxide Systems , 2012 , pp. 227 - 232
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Sberveglieri, G, Sensors and Actuators B 23 (1995) 103–109.Google Scholar
Wagh, M S, Patil, L A, Seth, T, Amalnerkar, D P, Materials Chemistry and Physics 84 (2004) 228–233.CrossRefGoogle Scholar
Tien, L C, Norton, D P, Gila, B P, Pearton, S J, Wang, H-T, Kang, B S, Ren, F, Applied Surface Science 253 (2007) 4748–4752.CrossRefGoogle Scholar
Song, X, Wang, Z, Liu, Y, Wang, C and Li, L, Nanotechnology 20 (2009) 075501–075506.CrossRefGoogle Scholar
Haridas, D and Gupta, V, Sens. Actuators B (2012) Article in press.Google Scholar
Valachos, D S, Papadopoulos, C A, Avaritsiotis, J N, Appl. Phys. Lett. 69 (1996) 650–652.CrossRefGoogle Scholar
Yu, J H, Choi, G M, Sensors and Actuators B 61 (1999) 59–67 CrossRefGoogle Scholar
Zhang, W-H and Zhang, W-D, Sensors and Actuators B 134 (2008) 403–408 CrossRefGoogle Scholar
Papadopoulos, C A, Vlachos, D S, Avaritsiotis, J N, Sensors and Actuators B 32 (1996) 61–69.CrossRefGoogle Scholar